The synthesis of pseudo- and semi-interpenetrating polymer networks (IPNs) based on polydimethylsiloxane (PDMS) and polystyrene (PS) is described. IPNs were obtained by simultaneous and in situ sequential synthesis pr...The synthesis of pseudo- and semi-interpenetrating polymer networks (IPNs) based on polydimethylsiloxane (PDMS) and polystyrene (PS) is described. IPNs were obtained by simultaneous and in situ sequential synthesis procedure. The preliminary studies on IPNs properties such as transition temperature, microphase separation and mechanical behaviors have been carried out by using differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The experimental evidence clearly showed that semi-IPNs obtained by sequential synthesis procedure have higher interpenetrating extent than pseudo-IPNs synthesized by simultaneous procedure. Over the full composition, the PDMS/PS IPNs are immiscible. The pseudo-IPNs microphase separation can be greatly subdued through the formation of grafting bonds between two networks as well as the kinetic rate-matching of the individual network crosslinking.展开更多
Interpenetrating polymer networks （IPNs） composed of acrylate-modified polyurethane （PU）/unsaturated polyester （UP） resin via simultaneous polymerization with various component ratios of PU/UP were prepared. The...Interpenetrating polymer networks （IPNs） composed of acrylate-modified polyurethane （PU）/unsaturated polyester （UP） resin via simultaneous polymerization with various component ratios of PU/UP were prepared. The polymerization processes of IPNs were traced through infrared spectrum （IR） techniques, by which the phase separation in systems could be controlled effectively. Results for the morphology and miscibility among multiple phases of IPNs, obtained by transmission electron microscope （TEM） indicated that the domains between two phases were constricted in nanometer scales. The dynamic mechanical thermal analyzer （DMTA） detection results revealed that the loss factor （tanS） and loss modulus （E″） increased with the polyurethane amounts in system, and the peak value in curves of tanδ and E″ appeared toward low temperature ranges. Maximum tanδ values of all samples were above 0.3 in the nearly 50℃ ranges. Also, the mechanical properties of PU/UP IPNs were studied in detail.展开更多
A series of polyurethane （PU）/vinyl ester resin （VER） simultaneous IPNs （interpenetrating polymer networks） with different component ratios and comonomers types introduced to VER were synthesized and the polymer...A series of polyurethane （PU）/vinyl ester resin （VER） simultaneous IPNs （interpenetrating polymer networks） with different component ratios and comonomers types introduced to VER were synthesized and the polymerization processes were traced by Fourier transform infrared spectroscopy （FTIR） to study the kinetics of IPNs and hydrogen bonding action within multi-component. Furthermore, the relationship of polymerization process with morphology was investigated in detail for the first time by the morphological information given by chemical action between two networks besides physical entanglement, atomic force microscope （AFM） observation and dynamic mechanical analysis （DMA）. The results indicated that the degree of hydrogen bonding （Xb,UT,%）, calculated from functional group conversional rate and fine structures gained from FT-IR spectra of two networks, were affected by PU/VER weight ratios and comonomer types of VER. The relationship of formation kinetics and morphology showed that the change of Xb,UT （%） values exhibited excellent consistency with that of phase sizes observed by AFM and detected by DMA.展开更多
Interpenetrating polymer network (IPN), gradient IPN and BaTiO3 filled IPN, composed of poly(ethylene glycol urethane) (PEGPU) and unsaturated polyester resin (UP) curing at room temperatures were prepared. Then the e...Interpenetrating polymer network (IPN), gradient IPN and BaTiO3 filled IPN, composed of poly(ethylene glycol urethane) (PEGPU) and unsaturated polyester resin (UP) curing at room temperatures were prepared. Then the effect of soft/hard segment ratio in polyurethane (PU), component ratio of PU to UP in IPN, adding amount of BaTiO3 in filled IPN, the component sequences and interval times between each IPN for gradient IPN, on morphology and mechanical behavior of IPN and BaTiO3/IPN nanocomposites with different molecular weight of PU were studied systematically. Moreover, the investigation on the relationship between the morphologies and the mechanical properties indicated that the IPN with finer morphology exhibited an excellent consistency of the higher strengths and elongations.展开更多
文摘The synthesis of pseudo- and semi-interpenetrating polymer networks (IPNs) based on polydimethylsiloxane (PDMS) and polystyrene (PS) is described. IPNs were obtained by simultaneous and in situ sequential synthesis procedure. The preliminary studies on IPNs properties such as transition temperature, microphase separation and mechanical behaviors have been carried out by using differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The experimental evidence clearly showed that semi-IPNs obtained by sequential synthesis procedure have higher interpenetrating extent than pseudo-IPNs synthesized by simultaneous procedure. Over the full composition, the PDMS/PS IPNs are immiscible. The pseudo-IPNs microphase separation can be greatly subdued through the formation of grafting bonds between two networks as well as the kinetic rate-matching of the individual network crosslinking.
基金supported by the Scientific Research Foundation of Harbin Institute of Technology(HIT.2002.56)the Postdoctoral Foundation of Heilongjiang Province,China
文摘Interpenetrating polymer networks （IPNs） composed of acrylate-modified polyurethane （PU）/unsaturated polyester （UP） resin via simultaneous polymerization with various component ratios of PU/UP were prepared. The polymerization processes of IPNs were traced through infrared spectrum （IR） techniques, by which the phase separation in systems could be controlled effectively. Results for the morphology and miscibility among multiple phases of IPNs, obtained by transmission electron microscope （TEM） indicated that the domains between two phases were constricted in nanometer scales. The dynamic mechanical thermal analyzer （DMTA） detection results revealed that the loss factor （tanS） and loss modulus （E″） increased with the polyurethane amounts in system, and the peak value in curves of tanδ and E″ appeared toward low temperature ranges. Maximum tanδ values of all samples were above 0.3 in the nearly 50℃ ranges. Also, the mechanical properties of PU/UP IPNs were studied in detail.
基金supported by the National Natural Science Foundation of China under grant No.50675045the State Key Lab of Advanced Welding Production Technology(Harbin Institute of Technology).
文摘A series of polyurethane （PU）/vinyl ester resin （VER） simultaneous IPNs （interpenetrating polymer networks） with different component ratios and comonomers types introduced to VER were synthesized and the polymerization processes were traced by Fourier transform infrared spectroscopy （FTIR） to study the kinetics of IPNs and hydrogen bonding action within multi-component. Furthermore, the relationship of polymerization process with morphology was investigated in detail for the first time by the morphological information given by chemical action between two networks besides physical entanglement, atomic force microscope （AFM） observation and dynamic mechanical analysis （DMA）. The results indicated that the degree of hydrogen bonding （Xb,UT,%）, calculated from functional group conversional rate and fine structures gained from FT-IR spectra of two networks, were affected by PU/VER weight ratios and comonomer types of VER. The relationship of formation kinetics and morphology showed that the change of Xb,UT （%） values exhibited excellent consistency with that of phase sizes observed by AFM and detected by DMA.
文摘Interpenetrating polymer network (IPN), gradient IPN and BaTiO3 filled IPN, composed of poly(ethylene glycol urethane) (PEGPU) and unsaturated polyester resin (UP) curing at room temperatures were prepared. Then the effect of soft/hard segment ratio in polyurethane (PU), component ratio of PU to UP in IPN, adding amount of BaTiO3 in filled IPN, the component sequences and interval times between each IPN for gradient IPN, on morphology and mechanical behavior of IPN and BaTiO3/IPN nanocomposites with different molecular weight of PU were studied systematically. Moreover, the investigation on the relationship between the morphologies and the mechanical properties indicated that the IPN with finer morphology exhibited an excellent consistency of the higher strengths and elongations.
