Rice is the staple food for more than half of the world＇s population and for more than 60% of China population. Increasing rice yield is therefore crucial for solving food shortage problem, ensuring food secruity, an...Rice is the staple food for more than half of the world＇s population and for more than 60% of China population. Increasing rice yield is therefore crucial for solving food shortage problem, ensuring food secruity, and reducing poverty. Given the vast population and limited per capita cultivated land in China, meeting food demands by increasing the yield per unit area with the aid of advanced sciences and technologies would be the only option. Several alternative measures for increasing crop yield, such as building water conservancy facilities, increasing fertilizer application, improving soil texture, forming interrelated cultivation techniques, more effective controlling of pests and diseases, and using of elite varieties, have been undertaken. Among these alternative measures, adopting elite varieties, particularly popularizing super hybrid rice, proves to be the most economical and effective option.展开更多
The seedlings of Vernicia montana derived from seeds soaking with water (the first group)or 300 mg5L -1 mixed nitric_acid rare earth solution (the second group) were treated with various concentrations of mixed nitric...The seedlings of Vernicia montana derived from seeds soaking with water (the first group)or 300 mg5L -1 mixed nitric_acid rare earth solution (the second group) were treated with various concentrations of mixed nitric_acid rare earth solution by foliage spraying. The results showed that the seedling heights sprayed with 100 和 1 000 mg·L -1 of the first group and with 50 和 100 mg·L -1 of the second group were significantly higher than the controls, and the diameter at ground level sprayed with 300 mg·L -1 of the second group was significantly greater than the control, being 26.92% more than the latter; except for spraying with 0 mg5L -1 and 700～1 500 mg5L -1 of the second group, the seedling dry weight above ground of others was 29.13%～73.91% greater than the control, whereas the seedling dry weight under ground of others was 20.78%～116.88% greater than the control; the contents of chlorophyll a and chlorophyll b for all spraying seedling were 91.67%～191.67% and 87.5%～306.25% greater than the control, respectively, and soluble proteins and soluble sugars were 16.00%～179.78% and 10.73%～105.65% greater than the control, respectively. Compared with the control, the activity of SOD tended to increase, whereas the contents of MDA decreased. These indicated that spraying leaves with optimum concentration of mixed nitric_acid rare earth solution could markedly promote the growth of seedlings and improve resistance ability of V. montana seedlings to bad environment. On the whole, the effects of spraying the leaves of seedling with 50～500 mg5L -1 mixed nitric_acid rare earth solution, which were derived from seeds soaking with 300 mg·L -1 mixed nitric_acid rare earth solution, were good.展开更多
The huge and rapid progress in electric drives offers new opportunities to improve the performances of aircraft at all levels：fuel burn,environmental footprint,safety,integration and production,serviceability,and mai...The huge and rapid progress in electric drives offers new opportunities to improve the performances of aircraft at all levels：fuel burn,environmental footprint,safety,integration and production,serviceability,and maintainability.Actuation for safety-critical applications like flight-controls,landing gears,and even engines is one of the major consumers of non-propulsive power.Conventional actuation with centralized hydraulic power generation and distribution and control of power by throttling has been well established for decades,but offers a limited potential of evolution.In this context,electric drives become more and more attractive to remove the natural drawbacks of conventional actuation and to offer new opportunities for improving performance.This paper takes the stock,at both the signal and power levels,of the evolution of actuation for safety-critical applications in aerospace.It focuses on the recent advances and the remaining challenges to be taken toward full electrical actuation for commercial and military aircraft,helicopters,and launchers.It logically starts by emphasizing the specificity of safety-critical actuation for aerospace.The following section addresses in details the evolution of aerospace actuation from mechanically-signaled and hydraulically-supplied to all electric,with special emphasis on research and development programs and on solutions entered into service.Finally,the last section reviews the challenges to be taken to generalize the use of all-electric actuators for future aircraft programs.展开更多
Immature zygotic embryos of Quercus variabilis were as explants to induce somatic embryogenesis. Several factors influencing somatic embryogenesis have been assayed. Somatic embryos can be induced in MS and WPM basal ...Immature zygotic embryos of Quercus variabilis were as explants to induce somatic embryogenesis. Several factors influencing somatic embryogenesis have been assayed. Somatic embryos can be induced in MS and WPM basal medium, but there was more quantity, big size and high induction rate in MS medium. Induction rate was not significant cultured in light and dark condition. Zygotic embryos, collected in middle of July, gave higher rate of somatic embryogenesis than those collected on the earlier or later date. By adding 6-BA in medium individually, somatic embryogenesis appeared directly on the zygotic embryos without detectable callus. Secondary embryogenesis appeared in medium with 2,4-D individual or combined with 6-BA or TDZ. High induction frequency of 90% was achieved in MS medium supplemented with 0.5 mg·L -1 6-BA and 2,4-D, whereas the rate in hormone-free medium was only 16.7%. The genotypes of mother trees had an great impact on the inducing rate. Zygotic embryo surgery treatments were not favorable to embryogenesis. It was best to inoculate with entire zygotic embryos. The hypocotyl was a crucial part on somatic embryogenesis for Q. variabilis.展开更多
Group size and composition of blue sheep(Pseudois nayaur)were studied in the Helan Mountains, Ningxia Autonomous Region from November to December 2003.We scanned mountain slopes with binoculars and observed with 20-60...Group size and composition of blue sheep(Pseudois nayaur)were studied in the Helan Mountains, Ningxia Autonomous Region from November to December 2003.We scanned mountain slopes with binoculars and observed with 20-60× spotting-scope. A total of 310 herds of blue sheep and 1 336 individuals were observed during the study period. Blue sheep were frequently seen in small herds of 2 to 8 individuals, which represent 94.8% of total herds observed. Herds consisting of 9 individuals or more represented 5.2%. The largest herd we observed numbered 51 individuals. Mean group size was 4.2 individuals. Blue sheep herds can be divided into three types: male herds (composed solely of males), female herds (consisting of females with or without juveniles of both sexes), and mixed herds (including adult males, females, and subadults).Among the 310 herds, female herds were counted 150 times(48.4%), mixed herds 154 times(49.7%), and male herds 6 times(1.9%). Of 1 336 blue sheep classified by sex and age, adults, subadults and juveniles composed 64.1%,20.8%, and 15.1% respectively. The female:male ratio of adults was 1∶0.73. The ratio of adult females to juveniles was 1∶0.56, which is higher than the ratio recorded in spring (1∶0.43) or summer (1∶0.44).The results showed that the Helan Mountains State Nature Reserve has succeed in protecting blue sheep.展开更多
本文对中国英语学习者语料库(CLEC)中的复合词more and more进行检索,发现中国学生对该词的触发模式不同于英语本族人。英国国家语料库(BNC)显示,与中国学生相比,英语本族人较少使用该词,但在语义搭配、语法建构和语用功能等方面表现出...本文对中国英语学习者语料库(CLEC)中的复合词more and more进行检索,发现中国学生对该词的触发模式不同于英语本族人。英国国家语料库(BNC)显示,与中国学生相比,英语本族人较少使用该词,但在语义搭配、语法建构和语用功能等方面表现出较大的自由度和多样性。本文建议,外语教师与学生应充分利用语料库资源,认识使用频率对语言结构特征理解的重要意义,在使用二语时不但注意词汇触发的可能性,而且注意词汇触发的可接受性和自然度,特别要谨慎对待英汉语言中貌似相同的词。展开更多
The mechanism of the FA/O chelating agent in the process of chemical mechanical polishing （CMP） is introduced. CMP is carried on a φ300 mm copper film. The higher polishing rate and lower surface roughness are acqu...The mechanism of the FA/O chelating agent in the process of chemical mechanical polishing （CMP） is introduced. CMP is carried on a φ300 mm copper film. The higher polishing rate and lower surface roughness are acquired due to the action of an FA/O chelating agent with an extremely strong chelating ability under the condition of low pressure and low abrasive concentration during the CMP process. According to the results of several kinds of additive interaction curves when the pressure is 13.78 kPa, flow rate is 150 mL/min, and the rotating speed is 55/60 rpm, it can be demonstrated that the FA/O chelating agent plays important role during the CMP process.展开更多
Electromechanical actuators（EMAs） are becoming increasingly attractive in the field of more electric aircraft because of their outstanding benefits, which include reduced fuel burn and maintenance cost, enhanced sys...Electromechanical actuators（EMAs） are becoming increasingly attractive in the field of more electric aircraft because of their outstanding benefits, which include reduced fuel burn and maintenance cost, enhanced system flexibility, and improved management of fault detection and isolation. However, electromechanical actuation raises specific issues when being used for safetycritical aerospace applications like flight controls： huge reflected inertia to load, jamming-type failure, and increase of backlash with service due to wear and local dissipation of heat losses for thermal balance. This study proposes an incremental approach for virtual prototyping of EMAs. It is driven by a model-based system engineering process in order to enable simulation-aided design.Best practices supported by Bond graph formalism are suggested to develop a model＇s structure efficiently and to make the model ready for use（or extension） by addressing the above mentioned issues. Physical effects are progressively introduced, and the realism of lumped-parameter models is increased step-by-step. In particular, multi-level component models are architected to ensure continuity between engineering activities. The models are implemented in the AMESim simulation environment, and simulation responses are given to illustrate how they can be used for preliminary sizing, control design, thermal balance verification, and faults to failure analysis. The proposed best practices intend to provide engineers with fast, reusable, and efficient means to assess performance virtually and enhance maturity, performance, and robustness.展开更多
In the aerospace field, electromechanical actuators are increasingly being implemented in place of conventional hydraulic actuators. For safety-critical embedded actuation applications like flight controls, the use of...In the aerospace field, electromechanical actuators are increasingly being implemented in place of conventional hydraulic actuators. For safety-critical embedded actuation applications like flight controls, the use of electromechanical actuators introduces specific issues related to thermal balance, reflected inertia, parasitic motion due to compliance and response to failure. Unfortunately, the physical effects governing the actuator behaviour are multidisciplinary, coupled and nonlinear. Although numerous multi-domain and system-level simulation packages are now available on the market, these effects are rarely addressed as a whole because of a lack of scientific approaches for model architecting, multi-purpose incremental modelling and judicious model implementation. In this publication, virtual prototyping of electromechanical actuators is addressed using the Bond-Graph formalism. New approaches are proposed to enable incremental modelling,thermal balance analysis, response to free-run or jamming faults, impact of compliance on parasitic motion, and influence of temperature. A special focus is placed on friction and compliance of the mechanical transmission with fault injection and temperature dependence. Aileron actuation is used to highlight the proposals for control design, energy consumption and thermal analysis, power network pollution analysis and fault response.展开更多
The optional types of power source and actuator in the aircraft are more and more diverse due to fast development in more electric technology, which makes the combinations of different power sources and actuators beco...The optional types of power source and actuator in the aircraft are more and more diverse due to fast development in more electric technology, which makes the combinations of different power sources and actuators become extremely complex in the architecture optimization process of airborne actuation system. The traditional ＂trial and error＂ method cannot satisfy the design demands. In this paper, firstly, the composition of more electric aircraft （MEA） flight control actuation system （FCAS） is introduced, and the possible architecture quantity is calculated. Secondly, the evaluation criteria of FCAS architecture with respect to safe reliability, weight and efficiency are proposed, and the evaluation criteria values are calculated in the case that each control surface adopts the same actuator configuration. Finally, the optimization results of MEA FCAS architecture are obtained by applying genetic algorithm （GA）. Compared to the traditional actuation system architecture, which only adopts servo valve controlled hydraulic actuators, the weight of the optimized more electric actuation system architecture can be reduced by 6%, and the efficiency can be improved by 30% based on the safe reliability requirements.展开更多
A rescuing archaeological excavation in Area H of the Hutian kiln-site was carried out in July-October 1999 by the Jiangxi Provincial Institute of Cultural Relics and Archaeology. The work covered an area of more than...A rescuing archaeological excavation in Area H of the Hutian kiln-site was carried out in July-October 1999 by the Jiangxi Provincial Institute of Cultural Relics and Archaeology. The work covered an area of more than 1,300 sq m, revealed 11 spots of house-foundation, well, small yard,clay-refining pool and ash-pit remains, and discovered above 600 intact and restorable articles of greenish-white-glazed, egg-white-glazed, black-glazed and blue-and-white porcelain wares from the Song, Yuan and Ming periods. The excavation clarified relatively direct stratigraphic evidence on the typological evolution of the vessels typical of the Song and Yuan periods and threw light on a batch of egg-white-glazed “shu fu” porcelain objects of the early Yuan and some inscribed porcelain-making implements.展开更多
The geometric configurations of binuclear Zinc( complex Zn2[(n-Bu)2NCSS]4 and the ligand Na[(n-Bu)2 NCSS] have been optimized by B3LYP quantum chemical method. The electronic structures have been performed by density ...The geometric configurations of binuclear Zinc( complex Zn2[(n-Bu)2NCSS]4 and the ligand Na[(n-Bu)2 NCSS] have been optimized by B3LYP quantum chemical method. The electronic structures have been performed by density functional theory at B3LYP/6-31G* level. The electronic spectrums of the complex and ligand were calculated by ZINDO/S-CIS method. It is indicated from the calculation that: (1) The coordination effect of bridging ligand is bigger than that of chelating one, and the bridging ligands also translate more charge to Zn than the chelating one. (2) The calculated results about electronic spectrums are similarly to experimental measurement, and farther explain that absorption band at λ=267 nm of complex is assigned to two n → π* transitions :one arising from the bridging ligands and the another mainly arising from the chelating ligands;but absorption band at λ=236 nm of complex is assigned to π → π* transition which the electron mainly translates from the bridging ligands to the chelating ligands. (3) By consideration of delocalization and polar effects in coordination, the charge transfer from ligand to metal decreases the π-π and p-π conjugation effects in the chromophore group NCS2 and to increase the energy needed for the π → π* and n → π* transitions, and results in the absorption bands shifting towards the short wavelength direction.展开更多
Obesity is recognized as the second highest risk factor for cancer. The pathogenic mechanisms underlying tobaccorelated cancers are well characterized and efective programs have led to a decline in smoking and related...Obesity is recognized as the second highest risk factor for cancer. The pathogenic mechanisms underlying tobaccorelated cancers are well characterized and efective programs have led to a decline in smoking and related cancers, but there is a global epidemic of obesity without a clear understanding of how obesity causes cancer. Obesity is heterogeneous, and approximately 25% of obese individuals remain healthy(metabolically healthy obese, MHO), so which fat deposition(subcutaneous versus visceral, adipose versus ectopic) is "malignant"? What is the mechanism of carcinogenesis? Is it by metabolic dysregulation or chronic inflammation? Through which chemokines/genes/signaling pathways does adipose tissue influence carcinogenesis? Can selective inhibition of these pathways uncouple obesity from cancers? Do all obesity related cancers(ORCs) share a molecular signature? Are there common(overlapping) genetic loci that make individuals susceptible to obesity, metabolic syndrome, and cancers? Can we identify precursor lesions of ORCs and will early intervention of high risk individuals alter the natural history? It appears unlikely that the obesity epidemic will be controlled anytime soon; answers to these questions will help to reduce the adverse efect of obesity on human condition.展开更多
Research shows teachers’speaking less so involvesstudents more.So English teacher talk determines tosome extent whether the teaching is successful or not.After giving a brief introduction to teacher talk inEnglish cl...Research shows teachers’speaking less so involvesstudents more.So English teacher talk determines tosome extent whether the teaching is successful or not.After giving a brief introduction to teacher talk inEnglish class,this paper analyzes the possible factorsthat affect teacher talk.It then suggests some im-provements of teacher talk in order to better our teach-ing methodology.展开更多
LiCoO2 gradient coated LiNi0.96Co0.04O2 material and iso-structure LiNi0.8Co0.2O2 material (the same molar ratio 8/2 of Ni/Co in the two materials) as cathode for lithium-ion batteries were synthesized with a co-preci...LiCoO2 gradient coated LiNi0.96Co0.04O2 material and iso-structure LiNi0.8Co0.2O2 material (the same molar ratio 8/2 of Ni/Co in the two materials) as cathode for lithium-ion batteries were synthesized with a co-precipitation method. Microstructure of iso-structure LiNi0.8Co0.2O2 were about the same as that of LiNiO2, and the structure of the coated material was much more similar to that of LiCoO2 based on the X-ray diffraction patterns. The cycling voltammetry and galvanostatic cycle tests show that the properties of the coated material were improved significantly. The first specific charge and discharge capacity for the coated material was 249.20 mAh·g-1 and 207.90 mAh·g-1 respectively, and the specific discharge capacity for the 100th cycle was still 186.02 mAh·g-1 with an irreversible loss of only 21.1 mAh·g-1. This showed that the new material had a good lithium intercalation-deintrercalation performance. Meanwhile, the mechanism of the sintering reaction was proposed. During the sintering reaction of the precursor with LiOH, the Li+-ion permeated into the body of precursors because the shape of the precursor particles was not changed basically based on scanning electronic microscopy. So, the layer microstructure of the precursor is important for the layer microstructure of lithium nickel cobalt oxides electrode material.展开更多
文摘Rice is the staple food for more than half of the world＇s population and for more than 60% of China population. Increasing rice yield is therefore crucial for solving food shortage problem, ensuring food secruity, and reducing poverty. Given the vast population and limited per capita cultivated land in China, meeting food demands by increasing the yield per unit area with the aid of advanced sciences and technologies would be the only option. Several alternative measures for increasing crop yield, such as building water conservancy facilities, increasing fertilizer application, improving soil texture, forming interrelated cultivation techniques, more effective controlling of pests and diseases, and using of elite varieties, have been undertaken. Among these alternative measures, adopting elite varieties, particularly popularizing super hybrid rice, proves to be the most economical and effective option.
文摘The seedlings of Vernicia montana derived from seeds soaking with water (the first group)or 300 mg5L -1 mixed nitric_acid rare earth solution (the second group) were treated with various concentrations of mixed nitric_acid rare earth solution by foliage spraying. The results showed that the seedling heights sprayed with 100 和 1 000 mg·L -1 of the first group and with 50 和 100 mg·L -1 of the second group were significantly higher than the controls, and the diameter at ground level sprayed with 300 mg·L -1 of the second group was significantly greater than the control, being 26.92% more than the latter; except for spraying with 0 mg5L -1 and 700～1 500 mg5L -1 of the second group, the seedling dry weight above ground of others was 29.13%～73.91% greater than the control, whereas the seedling dry weight under ground of others was 20.78%～116.88% greater than the control; the contents of chlorophyll a and chlorophyll b for all spraying seedling were 91.67%～191.67% and 87.5%～306.25% greater than the control, respectively, and soluble proteins and soluble sugars were 16.00%～179.78% and 10.73%～105.65% greater than the control, respectively. Compared with the control, the activity of SOD tended to increase, whereas the contents of MDA decreased. These indicated that spraying leaves with optimum concentration of mixed nitric_acid rare earth solution could markedly promote the growth of seedlings and improve resistance ability of V. montana seedlings to bad environment. On the whole, the effects of spraying the leaves of seedling with 50～500 mg5L -1 mixed nitric_acid rare earth solution, which were derived from seeds soaking with 300 mg·L -1 mixed nitric_acid rare earth solution, were good.
文摘The huge and rapid progress in electric drives offers new opportunities to improve the performances of aircraft at all levels：fuel burn,environmental footprint,safety,integration and production,serviceability,and maintainability.Actuation for safety-critical applications like flight-controls,landing gears,and even engines is one of the major consumers of non-propulsive power.Conventional actuation with centralized hydraulic power generation and distribution and control of power by throttling has been well established for decades,but offers a limited potential of evolution.In this context,electric drives become more and more attractive to remove the natural drawbacks of conventional actuation and to offer new opportunities for improving performance.This paper takes the stock,at both the signal and power levels,of the evolution of actuation for safety-critical applications in aerospace.It focuses on the recent advances and the remaining challenges to be taken toward full electrical actuation for commercial and military aircraft,helicopters,and launchers.It logically starts by emphasizing the specificity of safety-critical actuation for aerospace.The following section addresses in details the evolution of aerospace actuation from mechanically-signaled and hydraulically-supplied to all electric,with special emphasis on research and development programs and on solutions entered into service.Finally,the last section reviews the challenges to be taken to generalize the use of all-electric actuators for future aircraft programs.
文摘Immature zygotic embryos of Quercus variabilis were as explants to induce somatic embryogenesis. Several factors influencing somatic embryogenesis have been assayed. Somatic embryos can be induced in MS and WPM basal medium, but there was more quantity, big size and high induction rate in MS medium. Induction rate was not significant cultured in light and dark condition. Zygotic embryos, collected in middle of July, gave higher rate of somatic embryogenesis than those collected on the earlier or later date. By adding 6-BA in medium individually, somatic embryogenesis appeared directly on the zygotic embryos without detectable callus. Secondary embryogenesis appeared in medium with 2,4-D individual or combined with 6-BA or TDZ. High induction frequency of 90% was achieved in MS medium supplemented with 0.5 mg·L -1 6-BA and 2,4-D, whereas the rate in hormone-free medium was only 16.7%. The genotypes of mother trees had an great impact on the inducing rate. Zygotic embryo surgery treatments were not favorable to embryogenesis. It was best to inoculate with entire zygotic embryos. The hypocotyl was a crucial part on somatic embryogenesis for Q. variabilis.
文摘Group size and composition of blue sheep(Pseudois nayaur)were studied in the Helan Mountains, Ningxia Autonomous Region from November to December 2003.We scanned mountain slopes with binoculars and observed with 20-60× spotting-scope. A total of 310 herds of blue sheep and 1 336 individuals were observed during the study period. Blue sheep were frequently seen in small herds of 2 to 8 individuals, which represent 94.8% of total herds observed. Herds consisting of 9 individuals or more represented 5.2%. The largest herd we observed numbered 51 individuals. Mean group size was 4.2 individuals. Blue sheep herds can be divided into three types: male herds (composed solely of males), female herds (consisting of females with or without juveniles of both sexes), and mixed herds (including adult males, females, and subadults).Among the 310 herds, female herds were counted 150 times(48.4%), mixed herds 154 times(49.7%), and male herds 6 times(1.9%). Of 1 336 blue sheep classified by sex and age, adults, subadults and juveniles composed 64.1%,20.8%, and 15.1% respectively. The female:male ratio of adults was 1∶0.73. The ratio of adult females to juveniles was 1∶0.56, which is higher than the ratio recorded in spring (1∶0.43) or summer (1∶0.44).The results showed that the Helan Mountains State Nature Reserve has succeed in protecting blue sheep.
文摘本文对中国英语学习者语料库(CLEC)中的复合词more and more进行检索,发现中国学生对该词的触发模式不同于英语本族人。英国国家语料库(BNC)显示,与中国学生相比,英语本族人较少使用该词,但在语义搭配、语法建构和语用功能等方面表现出较大的自由度和多样性。本文建议,外语教师与学生应充分利用语料库资源,认识使用频率对语言结构特征理解的重要意义,在使用二语时不但注意词汇触发的可能性,而且注意词汇触发的可接受性和自然度,特别要谨慎对待英汉语言中貌似相同的词。
基金supported by the Major National Science and Technology Special Projects(No.2009ZX02308)the National Natural Science Foundation of Hebei Province(No.E2013202247)the Fund Project of Hebei Provincial Department of Education(No.2011128)
文摘The mechanism of the FA/O chelating agent in the process of chemical mechanical polishing （CMP） is introduced. CMP is carried on a φ300 mm copper film. The higher polishing rate and lower surface roughness are acquired due to the action of an FA/O chelating agent with an extremely strong chelating ability under the condition of low pressure and low abrasive concentration during the CMP process. According to the results of several kinds of additive interaction curves when the pressure is 13.78 kPa, flow rate is 150 mL/min, and the rotating speed is 55/60 rpm, it can be demonstrated that the FA/O chelating agent plays important role during the CMP process.
基金supports of the China Scholarship Council(CSC)the National Natural Science Foundation of China(No.51275021 and No.61327807)
文摘Electromechanical actuators（EMAs） are becoming increasingly attractive in the field of more electric aircraft because of their outstanding benefits, which include reduced fuel burn and maintenance cost, enhanced system flexibility, and improved management of fault detection and isolation. However, electromechanical actuation raises specific issues when being used for safetycritical aerospace applications like flight controls： huge reflected inertia to load, jamming-type failure, and increase of backlash with service due to wear and local dissipation of heat losses for thermal balance. This study proposes an incremental approach for virtual prototyping of EMAs. It is driven by a model-based system engineering process in order to enable simulation-aided design.Best practices supported by Bond graph formalism are suggested to develop a model＇s structure efficiently and to make the model ready for use（or extension） by addressing the above mentioned issues. Physical effects are progressively introduced, and the realism of lumped-parameter models is increased step-by-step. In particular, multi-level component models are architected to ensure continuity between engineering activities. The models are implemented in the AMESim simulation environment, and simulation responses are given to illustrate how they can be used for preliminary sizing, control design, thermal balance verification, and faults to failure analysis. The proposed best practices intend to provide engineers with fast, reusable, and efficient means to assess performance virtually and enhance maturity, performance, and robustness.
基金supported by the Aeronautical Science Foundation of China (No. 2012ZD51)the support of the China Scholarship Council (CSC)
文摘In the aerospace field, electromechanical actuators are increasingly being implemented in place of conventional hydraulic actuators. For safety-critical embedded actuation applications like flight controls, the use of electromechanical actuators introduces specific issues related to thermal balance, reflected inertia, parasitic motion due to compliance and response to failure. Unfortunately, the physical effects governing the actuator behaviour are multidisciplinary, coupled and nonlinear. Although numerous multi-domain and system-level simulation packages are now available on the market, these effects are rarely addressed as a whole because of a lack of scientific approaches for model architecting, multi-purpose incremental modelling and judicious model implementation. In this publication, virtual prototyping of electromechanical actuators is addressed using the Bond-Graph formalism. New approaches are proposed to enable incremental modelling,thermal balance analysis, response to free-run or jamming faults, impact of compliance on parasitic motion, and influence of temperature. A special focus is placed on friction and compliance of the mechanical transmission with fault injection and temperature dependence. Aileron actuation is used to highlight the proposals for control design, energy consumption and thermal analysis, power network pollution analysis and fault response.
基金National Natural Science Foundation of China （50675009） International Science ＆ Technology Cooperation Program of China （2010DFA72540）
文摘The optional types of power source and actuator in the aircraft are more and more diverse due to fast development in more electric technology, which makes the combinations of different power sources and actuators become extremely complex in the architecture optimization process of airborne actuation system. The traditional ＂trial and error＂ method cannot satisfy the design demands. In this paper, firstly, the composition of more electric aircraft （MEA） flight control actuation system （FCAS） is introduced, and the possible architecture quantity is calculated. Secondly, the evaluation criteria of FCAS architecture with respect to safe reliability, weight and efficiency are proposed, and the evaluation criteria values are calculated in the case that each control surface adopts the same actuator configuration. Finally, the optimization results of MEA FCAS architecture are obtained by applying genetic algorithm （GA）. Compared to the traditional actuation system architecture, which only adopts servo valve controlled hydraulic actuators, the weight of the optimized more electric actuation system architecture can be reduced by 6%, and the efficiency can be improved by 30% based on the safe reliability requirements.
文摘A rescuing archaeological excavation in Area H of the Hutian kiln-site was carried out in July-October 1999 by the Jiangxi Provincial Institute of Cultural Relics and Archaeology. The work covered an area of more than 1,300 sq m, revealed 11 spots of house-foundation, well, small yard,clay-refining pool and ash-pit remains, and discovered above 600 intact and restorable articles of greenish-white-glazed, egg-white-glazed, black-glazed and blue-and-white porcelain wares from the Song, Yuan and Ming periods. The excavation clarified relatively direct stratigraphic evidence on the typological evolution of the vessels typical of the Song and Yuan periods and threw light on a batch of egg-white-glazed “shu fu” porcelain objects of the early Yuan and some inscribed porcelain-making implements.
文摘The geometric configurations of binuclear Zinc( complex Zn2[(n-Bu)2NCSS]4 and the ligand Na[(n-Bu)2 NCSS] have been optimized by B3LYP quantum chemical method. The electronic structures have been performed by density functional theory at B3LYP/6-31G* level. The electronic spectrums of the complex and ligand were calculated by ZINDO/S-CIS method. It is indicated from the calculation that: (1) The coordination effect of bridging ligand is bigger than that of chelating one, and the bridging ligands also translate more charge to Zn than the chelating one. (2) The calculated results about electronic spectrums are similarly to experimental measurement, and farther explain that absorption band at λ=267 nm of complex is assigned to two n → π* transitions :one arising from the bridging ligands and the another mainly arising from the chelating ligands;but absorption band at λ=236 nm of complex is assigned to π → π* transition which the electron mainly translates from the bridging ligands to the chelating ligands. (3) By consideration of delocalization and polar effects in coordination, the charge transfer from ligand to metal decreases the π-π and p-π conjugation effects in the chromophore group NCS2 and to increase the energy needed for the π → π* and n → π* transitions, and results in the absorption bands shifting towards the short wavelength direction.
文摘Obesity is recognized as the second highest risk factor for cancer. The pathogenic mechanisms underlying tobaccorelated cancers are well characterized and efective programs have led to a decline in smoking and related cancers, but there is a global epidemic of obesity without a clear understanding of how obesity causes cancer. Obesity is heterogeneous, and approximately 25% of obese individuals remain healthy(metabolically healthy obese, MHO), so which fat deposition(subcutaneous versus visceral, adipose versus ectopic) is "malignant"? What is the mechanism of carcinogenesis? Is it by metabolic dysregulation or chronic inflammation? Through which chemokines/genes/signaling pathways does adipose tissue influence carcinogenesis? Can selective inhibition of these pathways uncouple obesity from cancers? Do all obesity related cancers(ORCs) share a molecular signature? Are there common(overlapping) genetic loci that make individuals susceptible to obesity, metabolic syndrome, and cancers? Can we identify precursor lesions of ORCs and will early intervention of high risk individuals alter the natural history? It appears unlikely that the obesity epidemic will be controlled anytime soon; answers to these questions will help to reduce the adverse efect of obesity on human condition.
文摘Research shows teachers’speaking less so involvesstudents more.So English teacher talk determines tosome extent whether the teaching is successful or not.After giving a brief introduction to teacher talk inEnglish class,this paper analyzes the possible factorsthat affect teacher talk.It then suggests some im-provements of teacher talk in order to better our teach-ing methodology.
文摘LiCoO2 gradient coated LiNi0.96Co0.04O2 material and iso-structure LiNi0.8Co0.2O2 material (the same molar ratio 8/2 of Ni/Co in the two materials) as cathode for lithium-ion batteries were synthesized with a co-precipitation method. Microstructure of iso-structure LiNi0.8Co0.2O2 were about the same as that of LiNiO2, and the structure of the coated material was much more similar to that of LiCoO2 based on the X-ray diffraction patterns. The cycling voltammetry and galvanostatic cycle tests show that the properties of the coated material were improved significantly. The first specific charge and discharge capacity for the coated material was 249.20 mAh·g-1 and 207.90 mAh·g-1 respectively, and the specific discharge capacity for the 100th cycle was still 186.02 mAh·g-1 with an irreversible loss of only 21.1 mAh·g-1. This showed that the new material had a good lithium intercalation-deintrercalation performance. Meanwhile, the mechanism of the sintering reaction was proposed. During the sintering reaction of the precursor with LiOH, the Li+-ion permeated into the body of precursors because the shape of the precursor particles was not changed basically based on scanning electronic microscopy. So, the layer microstructure of the precursor is important for the layer microstructure of lithium nickel cobalt oxides electrode material.
