The upper Paleozoic natural gas reservoirs in the Ordos basin are generally characterized by a large gas-bearing area and low reserve abundance. On such a geological background, there still exist gas-enriched zones, w...The upper Paleozoic natural gas reservoirs in the Ordos basin are generally characterized by a large gas-bearing area and low reserve abundance. On such a geological background, there still exist gas-enriched zones, with relatively high outputs, high reserve abundance and stably distributed gas layers. The gas-enriched layers with relatively high permeability （the lower limit permeability is 0.5×10^-3μm^2） are key factors for the enrichment and high output of natural gas. Based on core observation, analytic results of inclusions, and a great deal of drilling data, we proposed the following four mechanisms for the formation of high-quality reservoirs： （1） in the source area the parent rocks are mainly metamorphic rocks and granites, which are favorable to keeping primary porosity; （2） under the condition of low A/S （accommodation/sediment supply） ratios, sandstone complex formed due to multistage fluvial stacking and filling are coarse in grain size with a high degree of sorting, low content of mud and good physical properties; （3） early-stage recharge of hydrocarbons restricted compaction and cementation, and thus are favorable to preservation of primary pores; （4） microfractures caused by the activity of basement faults during the Yanshan Movement stage can not only improve the permeability of tight sandstones, but also afford vertical pathways for hydrocarbon gas migration.展开更多
Understanding the impact of mining disturbances and creep deformation on the macroscopic deformation and the microscopic pore and fracture structures(MPFS)of coal is paramount for ensuring the secure extraction of coa...Understanding the impact of mining disturbances and creep deformation on the macroscopic deformation and the microscopic pore and fracture structures(MPFS)of coal is paramount for ensuring the secure extraction of coal resources.This study conducts cyclic loading-unloading and creep experiments on coal using a low-field nuclear magnetic resonance(NMR)experimental apparatus which is equipped with mechanical loading units,enabling real-time monitoring the T2spectrum.The experiments indicated that cyclic loading-unloading stress paths initiate internal damage within coal samples.Under identical creep stress conditions,coal samples with more initial damages had more substantial instantaneous deformation and creep deformation during the creep process.After undergoing nearly 35 h of staged creep,the total strains for coal samples CC01,CC02,and CC03 reach 2.160%,2.261%,and 2.282%,respectively.In the creep stage,the peak area ratio of seepage pores and microfractures(SPM)gradually diminishes.A higher degree of initial damage leads to a more pronounced compaction trend in the SPM of coal samples.Considering the porosity evolution of SPM during the creep process,this study proposes a novel fractional derivative model for the porosity evolution of SPM.The efficacy of the proposed model in predicting porosity evolution of SPM is substantiated through experimental validation.Furthermore,an analysis of the impact mechanisms on key parameters in the model was carried out.展开更多
The microfractures and natural fractures studies have a great significance in the hydrocarbon accumulation exploration and can be a good supporter for wide geophysical study on the major structures. This paper is a br...The microfractures and natural fractures studies have a great significance in the hydrocarbon accumulation exploration and can be a good supporter for wide geophysical study on the major structures. This paper is a brief review on microcracks and overpressure-induced fracture. It is to discuss different views on the mechanism of fractures in the subsurface of the earth.展开更多
The spatial and temporal distributions of acoustic emission （AE） during the deformation of samples containing an inhomogeneous fault have been studied under biaxial compression. The results show that the fault stren...The spatial and temporal distributions of acoustic emission （AE） during the deformation of samples containing an inhomogeneous fault have been studied under biaxial compression. The results show that the fault strength and the duration from loading to failure increase and the failure mode changes from abrupt instability to gradual failure with increase of lateral stress σ2. The pre-setting fault and its heterogeneity play an important role in controlling AE spatial distribution during the deformation. The basic pattern of AE spatial distribution is controlled by the pre-setting fault, especially the parts with inhomogeneous strength and the strong segment, and the localization of fracturing starts from the positions with inhomogeneous strength, With increase of σ5, the dense AE distribution area spreads from the positions with inhomogeneous strength to the whole strong segment gradually. AE temporal sequence is significantly affected by σ2. The fault shows abrupt instability in final failure, which occurs on a background of ＂enhancement-quiescence＂ in microfracturing activity at lower σ2. At higher σ5, the fault shows gradual failure, and AE occurrence rate increases continuously and AER increase exponentially before and after the failure, The effect of σ2 on b-value is also remarkable, b-value shows precursory decrease in the weakening stage when fault behavior is abrupt instability, but it shows balanced change when fault behavior is gradual failure,展开更多
Non-consistency of stress results is of ten observed during field measurements. In some cases, even the rneasurernents are made at the same location in a massive rockrnass, the results can vary widely. In order to sol...Non-consistency of stress results is of ten observed during field measurements. In some cases, even the rneasurernents are made at the same location in a massive rockrnass, the results can vary widely. In order to solve the problem, extensive research has been carried out to study the major factors wh1ch rnay affect stress deterrnlnation. They include the rock behaviour and the stress state. For rocks showing non-isotropic behaviour, the values of Young’s modulus and Poisson ratio vary with the orientation of loading and measurement. Stress condition in the rock affects the rock behaviour. Furtherrnore, the loading condition on rock samples durlng laboratory tests is different from in the field and therefore the determined e1astic constants may not represent the field condi tion. In general , the Young’s modulus may depend on the orientation, the loading path, the stress magnitude and the stress ratio. This paper examines in detail the effects of those factors, especially for rocks showing transversely isotropic behaviour. It is found that the discrepancy of stress results from field measurernents in this type of rock is mainly due to over simplification of the rock behavior and inadequate use of elastic constants of the rock during stress calculation. A case study is given,which indicates the significance of these factors and demonstrates the proper procedure for stress calculation from measurements.展开更多
基金This research is part of a project carried out during 2002-2004 and supported by the National Basic Research Program(Grant No.2001CB209100).
文摘The upper Paleozoic natural gas reservoirs in the Ordos basin are generally characterized by a large gas-bearing area and low reserve abundance. On such a geological background, there still exist gas-enriched zones, with relatively high outputs, high reserve abundance and stably distributed gas layers. The gas-enriched layers with relatively high permeability （the lower limit permeability is 0.5×10^-3μm^2） are key factors for the enrichment and high output of natural gas. Based on core observation, analytic results of inclusions, and a great deal of drilling data, we proposed the following four mechanisms for the formation of high-quality reservoirs： （1） in the source area the parent rocks are mainly metamorphic rocks and granites, which are favorable to keeping primary porosity; （2） under the condition of low A/S （accommodation/sediment supply） ratios, sandstone complex formed due to multistage fluvial stacking and filling are coarse in grain size with a high degree of sorting, low content of mud and good physical properties; （3） early-stage recharge of hydrocarbons restricted compaction and cementation, and thus are favorable to preservation of primary pores; （4） microfractures caused by the activity of basement faults during the Yanshan Movement stage can not only improve the permeability of tight sandstones, but also afford vertical pathways for hydrocarbon gas migration.
基金the National Science Fund for Distinguished Young Scholars(No.52225403)the Natural Science Foundation of Shanxi Province(No.202303021212073)the National Natural Science Foundation of China(No.52104210)。
文摘Understanding the impact of mining disturbances and creep deformation on the macroscopic deformation and the microscopic pore and fracture structures(MPFS)of coal is paramount for ensuring the secure extraction of coal resources.This study conducts cyclic loading-unloading and creep experiments on coal using a low-field nuclear magnetic resonance(NMR)experimental apparatus which is equipped with mechanical loading units,enabling real-time monitoring the T2spectrum.The experiments indicated that cyclic loading-unloading stress paths initiate internal damage within coal samples.Under identical creep stress conditions,coal samples with more initial damages had more substantial instantaneous deformation and creep deformation during the creep process.After undergoing nearly 35 h of staged creep,the total strains for coal samples CC01,CC02,and CC03 reach 2.160%,2.261%,and 2.282%,respectively.In the creep stage,the peak area ratio of seepage pores and microfractures(SPM)gradually diminishes.A higher degree of initial damage leads to a more pronounced compaction trend in the SPM of coal samples.Considering the porosity evolution of SPM during the creep process,this study proposes a novel fractional derivative model for the porosity evolution of SPM.The efficacy of the proposed model in predicting porosity evolution of SPM is substantiated through experimental validation.Furthermore,an analysis of the impact mechanisms on key parameters in the model was carried out.
文摘The microfractures and natural fractures studies have a great significance in the hydrocarbon accumulation exploration and can be a good supporter for wide geophysical study on the major structures. This paper is a brief review on microcracks and overpressure-induced fracture. It is to discuss different views on the mechanism of fractures in the subsurface of the earth.
基金Joint Seismological Science Foundation of China (105076) and continued sub-project ″Statistic Features of After-shock Sequences and Forecast of the Large Aftershocks″ (2004BA601B01-04-02) managed by the Ministry of Science and Tech-nology of China in the 10th five-year plan.
文摘The spatial and temporal distributions of acoustic emission （AE） during the deformation of samples containing an inhomogeneous fault have been studied under biaxial compression. The results show that the fault strength and the duration from loading to failure increase and the failure mode changes from abrupt instability to gradual failure with increase of lateral stress σ2. The pre-setting fault and its heterogeneity play an important role in controlling AE spatial distribution during the deformation. The basic pattern of AE spatial distribution is controlled by the pre-setting fault, especially the parts with inhomogeneous strength and the strong segment, and the localization of fracturing starts from the positions with inhomogeneous strength, With increase of σ5, the dense AE distribution area spreads from the positions with inhomogeneous strength to the whole strong segment gradually. AE temporal sequence is significantly affected by σ2. The fault shows abrupt instability in final failure, which occurs on a background of ＂enhancement-quiescence＂ in microfracturing activity at lower σ2. At higher σ5, the fault shows gradual failure, and AE occurrence rate increases continuously and AER increase exponentially before and after the failure, The effect of σ2 on b-value is also remarkable, b-value shows precursory decrease in the weakening stage when fault behavior is abrupt instability, but it shows balanced change when fault behavior is gradual failure,
文摘Non-consistency of stress results is of ten observed during field measurements. In some cases, even the rneasurernents are made at the same location in a massive rockrnass, the results can vary widely. In order to solve the problem, extensive research has been carried out to study the major factors wh1ch rnay affect stress deterrnlnation. They include the rock behaviour and the stress state. For rocks showing non-isotropic behaviour, the values of Young’s modulus and Poisson ratio vary with the orientation of loading and measurement. Stress condition in the rock affects the rock behaviour. Furtherrnore, the loading condition on rock samples durlng laboratory tests is different from in the field and therefore the determined e1astic constants may not represent the field condi tion. In general , the Young’s modulus may depend on the orientation, the loading path, the stress magnitude and the stress ratio. This paper examines in detail the effects of those factors, especially for rocks showing transversely isotropic behaviour. It is found that the discrepancy of stress results from field measurernents in this type of rock is mainly due to over simplification of the rock behavior and inadequate use of elastic constants of the rock during stress calculation. A case study is given,which indicates the significance of these factors and demonstrates the proper procedure for stress calculation from measurements.
