During the passage of Typhoon 0918 (Melor) over southern Honshu in Japan on 7 and 8 October 2009, strong winds with extremely high turbulence fluctuations were observed over Shirataki Mountain and the surrounding moun...During the passage of Typhoon 0918 (Melor) over southern Honshu in Japan on 7 and 8 October 2009, strong winds with extremely high turbulence fluctuations were observed over Shirataki Mountain and the surrounding mountains in Shimonoseki, Yamaguchi Prefecture, Japan. These strong winds caused damage to wind turbine blades at the Shiratakiyama Wind Farm owned by Kinden Corporation. In order to investigate the causes of the blade damage, the airflow characteristics from the time of the incidences are first simulated in detail with the combined use of the WRF-ARW mesoscale meteorological model and the RIAM-COMPACT LES turbulence model (CFD model). Subsequently, in order to evaluate the wind pressure acting on the wind turbine blades, an airflow analysis is separately performed for the vicinity of the blades with the RANS turbulence model. Finally, the stress on the blades is investigated using the FEM with the RANS analysis results as the boundary conditions.展开更多
It is highly important in Japan to choose a good site for wind turbines, because the spatial distribution of wind speed is quite complicated over steep complex terrain. We have been developing the unsteady numerical m...It is highly important in Japan to choose a good site for wind turbines, because the spatial distribution of wind speed is quite complicated over steep complex terrain. We have been developing the unsteady numerical model called the RIAM-COMPACT (Research Institute for Applied Mechanics, Kyushu University, Computational Prediction of Airflow over Complex Terrain). The RIAM-COMPACT is based on the LES (Large-Eddy Simulation). The object domain of the RIAM-COMPACT is from several m to several km, and can predict the airflow and gas diffusion over complex terrain with high precision. In the present paper, the design wind speed evaluation technique in wind turbine installation point by using the mesoscale meteorological model and RIAM-COMPACT CFD model was proposed. The design wind speed to be used for designing WTGs can be calculated by multiplying the ratio of the mean wind speed at the hub-height to the mean upper-air wind speed at the inflow boundary, i.e., the fractional increase of the mean hub-height wind speed, by the reduction ratio, R. The fractional increase of the mean hub-height wind speed was evaluated using the CFD simulation results. This method was proposed as Approach 1 in the present paper. A value of 61.9 m/s was obtained for the final design wind speed, Uh, in Approach 1. In the evaluation procedure of the design wind speed in Approach 2, neither the above-mentioned reduction rate, R, nor an upper-air wind speed of 1.7 Vo, where Vo is the reference wind speed, was used. Instead, the value of the maximum wind speed which was obtained from the typhoon simulation for each of the investigated wind directions was adopted. When the design wind speed was evaluated using the 50-year recurrence value, the design wind speed was 48.3 m/s. When a somewhat conservative safety factor was applied, that is, when the 100 year recurrence value was used instead, the design wind speed was 52.9 m/s.展开更多
The impact of well watered mesoscale wheat planted on the mesoscale boundary layer structures of midlatitude arid area has been investigated by using a mesoscale biophysical meteorological model. The investigation ind...The impact of well watered mesoscale wheat planted on the mesoscale boundary layer structures of midlatitude arid area has been investigated by using a mesoscale biophysical meteorological model. The investigation indicates that mesoscale perturbations in temperature and specific humidity over crop area from the adjacent dry, bare soil, caused by the transpiration from the crop canopy and evaporation from underlying humid soil, result in a horizontal pressure gradient. A mesoscale circulation is forced by the pressure perturbation with a wind speed of about 5 m/s directing from the crop canopy to the bare soil in the lower boundary layer. In the daytime, the boundary layer structure over a complex terrain is determined by the interactions between upslope flow circulations and the circulations mentioned above when wheat crop canopies are located on plain and plateau. The impact of crop canopy scale on this thermally forced mesoscale circulation is also investigated.展开更多
文摘During the passage of Typhoon 0918 (Melor) over southern Honshu in Japan on 7 and 8 October 2009, strong winds with extremely high turbulence fluctuations were observed over Shirataki Mountain and the surrounding mountains in Shimonoseki, Yamaguchi Prefecture, Japan. These strong winds caused damage to wind turbine blades at the Shiratakiyama Wind Farm owned by Kinden Corporation. In order to investigate the causes of the blade damage, the airflow characteristics from the time of the incidences are first simulated in detail with the combined use of the WRF-ARW mesoscale meteorological model and the RIAM-COMPACT LES turbulence model (CFD model). Subsequently, in order to evaluate the wind pressure acting on the wind turbine blades, an airflow analysis is separately performed for the vicinity of the blades with the RANS turbulence model. Finally, the stress on the blades is investigated using the FEM with the RANS analysis results as the boundary conditions.
文摘It is highly important in Japan to choose a good site for wind turbines, because the spatial distribution of wind speed is quite complicated over steep complex terrain. We have been developing the unsteady numerical model called the RIAM-COMPACT (Research Institute for Applied Mechanics, Kyushu University, Computational Prediction of Airflow over Complex Terrain). The RIAM-COMPACT is based on the LES (Large-Eddy Simulation). The object domain of the RIAM-COMPACT is from several m to several km, and can predict the airflow and gas diffusion over complex terrain with high precision. In the present paper, the design wind speed evaluation technique in wind turbine installation point by using the mesoscale meteorological model and RIAM-COMPACT CFD model was proposed. The design wind speed to be used for designing WTGs can be calculated by multiplying the ratio of the mean wind speed at the hub-height to the mean upper-air wind speed at the inflow boundary, i.e., the fractional increase of the mean hub-height wind speed, by the reduction ratio, R. The fractional increase of the mean hub-height wind speed was evaluated using the CFD simulation results. This method was proposed as Approach 1 in the present paper. A value of 61.9 m/s was obtained for the final design wind speed, Uh, in Approach 1. In the evaluation procedure of the design wind speed in Approach 2, neither the above-mentioned reduction rate, R, nor an upper-air wind speed of 1.7 Vo, where Vo is the reference wind speed, was used. Instead, the value of the maximum wind speed which was obtained from the typhoon simulation for each of the investigated wind directions was adopted. When the design wind speed was evaluated using the 50-year recurrence value, the design wind speed was 48.3 m/s. When a somewhat conservative safety factor was applied, that is, when the 100 year recurrence value was used instead, the design wind speed was 52.9 m/s.
基金Project supported by the National Natural Science Foundation of China and LASG.
文摘The impact of well watered mesoscale wheat planted on the mesoscale boundary layer structures of midlatitude arid area has been investigated by using a mesoscale biophysical meteorological model. The investigation indicates that mesoscale perturbations in temperature and specific humidity over crop area from the adjacent dry, bare soil, caused by the transpiration from the crop canopy and evaporation from underlying humid soil, result in a horizontal pressure gradient. A mesoscale circulation is forced by the pressure perturbation with a wind speed of about 5 m/s directing from the crop canopy to the bare soil in the lower boundary layer. In the daytime, the boundary layer structure over a complex terrain is determined by the interactions between upslope flow circulations and the circulations mentioned above when wheat crop canopies are located on plain and plateau. The impact of crop canopy scale on this thermally forced mesoscale circulation is also investigated.
