近年来,随着能源危机的加剧,可以将热能与电能进行直接转换的热电材料得到了广泛的关注。在众多热电材料体系中,有机无机纳米复合热电材料具有独特优势。相比于无机材料,有机材料成本低、质量轻、机械柔韧性好、热导率较低。添加不同类...近年来,随着能源危机的加剧,可以将热能与电能进行直接转换的热电材料得到了广泛的关注。在众多热电材料体系中,有机无机纳米复合热电材料具有独特优势。相比于无机材料,有机材料成本低、质量轻、机械柔韧性好、热导率较低。添加不同类型的添加材料构成纳米复合材料后,额外引入的声子-界面散射能进一步降低热导率,同时有机无机材料能带不匹配引起的载流子筛选效应进一步提升塞贝克(Seebeck)系数。因此,目前大量工作证明有机无机纳米复合热电材料有潜力获得高的热电优值(Figure of merit,ZT),在微型热电制冷器件、柔性可穿戴发电设备、温度传感器等领域均具有光明的应用前景。本文聚焦聚(3,4-乙烯二氧噻吩)∶聚(苯乙烯磺酸盐)(PEDOT∶PSS)热电材料及以其为基底构成的纳米复合材料热电性能的研究工作,综述了提升PEDOT∶PSS热电性能的物理方法、化学试剂改性法等。进一步重点讨论了加入不同类型的无机填料的PEDOT∶PSS基纳米复合材料热电性质的研究进展,并揭示了其热电性能提升的内在机制。展开更多
Finding binary sequences with Large SHG ratios is very important in the field of ultrafast science, biomedical optics, high-resolution microscopy and label-free imaging. In this paper, we have demonstrated the relatio...Finding binary sequences with Large SHG ratios is very important in the field of ultrafast science, biomedical optics, high-resolution microscopy and label-free imaging. In this paper, we have demonstrated the relation between the SHG contrast ratio and the traditional Merit Factor values. And in the light from known results in Merit Factor Problems, we have shown that Legendre Sequences or Jacobi Sequences, are still the best candidates to obtain binary sequences with large SHG contrast ratios. The authors also discussed the SHG behaviors on some sequences obtained from cyclotomic classes over the finite field GF (2l) .展开更多
Worldwide Interoperability for Microwave Access(WiMAX)trusts Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing(MIMO-OFDM)combination for the deployment of physical layer functions and for conne...Worldwide Interoperability for Microwave Access(WiMAX)trusts Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing(MIMO-OFDM)combination for the deployment of physical layer functions and for connecting the medium access control to the wireless media.Even though Orthogonal Frequency Division Multiplexing(OFDM)facilitates reliable digital broadband transmission in the fading wireless channels,the presence of synchro-nization errors in the form of Carrier Frequency Offset(CFO)and Time Offset(TO)adversely affect the performance of OFDM based physical layers.The objective of this work is to improve the accuracy of the frequency and the time offset estimation in the WiMAX physical layer.A method to enhance the synchro-nization accuracy byfine-tuning the merit factor of the preamble sequence is sug-gested in this paper.Also,a new preamble with improved synchronization accuracy is proposed for the WiMAX system.The performance of the proposed preamble is evaluated in a Rayleigh fading channel and the results of simulations show that the Mean Square Error(MSE)in offset estimation is significantly reduced and it outperforms the standard WiMAX preamble.展开更多
The essential purpose of radar is to detect a target of interest and provide information concerning the target’s location,motion,size,and other parameters.The knowledge about the pulse trains’properties shows that a...The essential purpose of radar is to detect a target of interest and provide information concerning the target’s location,motion,size,and other parameters.The knowledge about the pulse trains’properties shows that a class of signals is mainly well suited to digital processing of increasing practical importance.A low autocorrelation binary sequence(LABS)is a complex combinatorial problem.The main problems of LABS are low Merit Factor(MF)and shorter length sequences.Besides,the maximum possible MF equals 12.3248 as infinity length is unable to be achieved.Therefore,this study implemented two techniques to propose a new metaheuristic algorithm based on Hybrid Modified Sine Cosine Algorithm with Cuckoo Search Algorithm(HMSCACSA)using Inverse Filtering(IF)and clipping method to achieve better results.The proposed algorithms,LABS-IF and HMSCACSA-IF,achieved better results with two large MFs equal to 12.12 and 12.6678 for lengths 231 and 237,respectively,where the optimal solutions belong to the skew-symmetric sequences.The MF outperformed up to 24.335%and 2.708%against the state-of-the-art LABS heuristic algorithm,xLastovka,and Golay,respectively.These results indicated that the proposed algorithm’s simulation had quality solutions in terms of fast convergence curve with better optimal means,and standard deviation.展开更多
Piezoelectric composite materials have the ability to perform both sensing and actuating functions.It is a viable candidate for smart actuation in underwater noise controlling with its higher coupling factor and lower...Piezoelectric composite materials have the ability to perform both sensing and actuating functions.It is a viable candidate for smart actuation in underwater noise controlling with its higher coupling factor and lower acoustic impedance, when the piezoelectric rods are inclined to control its both the shear and the compression damping characteristics.In this paper, a simple physical model of 1-3 piezoelectric composite is advanced for maximizing the electromechanical coupling factor,the acoustic impedance,and the hydrophone figure of merit.展开更多
A novel current mode active-only universal filter using four dual current output Operational Transconductance Amplifiers (OTAs) and three Operational Amplifiers (OAs) is presented. The circuit can realize low pass and...A novel current mode active-only universal filter using four dual current output Operational Transconductance Amplifiers (OTAs) and three Operational Amplifiers (OAs) is presented. The circuit can realize low pass and high pass filter characteristics by choosing the suitable current output branches. The filter performance factors natural frequency (ω0), bandwidth , quality factor Q and transconductance gain gm are electronically tunable. The proposed circuit has very low sensitivities with respect to circuit active elements. From sensitivity analysis, it has been clearly shown that the proposed circuit has very low sensitivities with respect to the circuit active elements. The gain roll-off of high pass and low pass configuration is 18 dB/oc- tave. The proposed circuit facilitates integrability, programmability and ease of implementation.展开更多
采用合金设计、真空熔炼、快速凝固、球磨制粉、冷压成形和常压烧结工艺,制备了Cu、S掺杂的n型Bi_(2)Te_(2.7)Se_(0.3)热电材料,采用XRD、SEM和ZEM-3热电测试系统等表征热电材料晶体结构、微观形貌和热电性能,研究Cu、S掺杂的n型Bi_(2)T...采用合金设计、真空熔炼、快速凝固、球磨制粉、冷压成形和常压烧结工艺,制备了Cu、S掺杂的n型Bi_(2)Te_(2.7)Se_(0.3)热电材料,采用XRD、SEM和ZEM-3热电测试系统等表征热电材料晶体结构、微观形貌和热电性能,研究Cu、S掺杂的n型Bi_(2)Te_(2.7)Se_(0.3)热电材料热电性能机理。结果表明:Cu_(y)Bi_(2)Te_(2.62)S_(0.08)Se_(0.3)热电材料晶体结构为R-3m空间群斜方晶系的六面体层状结构;掺杂Cu的Cu_(y)Bi_(2)Te_(2.7)Se_(0.3)热电材料,形成Cui间隙缺陷和Bi′Te反位缺陷,随着载流子(电子)浓度增加,载流子迁移率降低,电导率显著增大;掺杂S的Bi_(2)Te_(2.62-z)SzSe_(0.3)热电材料,生成化学键健能较Bi-Te强的Bi-S,抑制反位缺陷Bi′Te形成,少数(空穴)载流子浓度减小,同时增强声子对声子散射和点缺陷对声子散射,从而使晶格热导率和双极扩散热导率降低,总热导率明显降低,抑制塞贝克系数的减少;Cu、S共掺杂的协同作用,n型Cu_(y)Bi_(2)Te_(2.62-z)SzSe_(0.3)热电材料电导率增大,而热导率基本不变,由此ZT值和功率因子显著提高;在300~400 K温度范围内,Cu_(0.03)Bi_(2)Te_(2.62)S_(0.08)Se_(0.3)的电导率约为7.0×10^(4)S/m,塞贝克系数约为220μV/K,功率因子约为2.4 m W/(m·K^(2)),热电优值(ZT值)约为1.0。Cu_(0.03)Bi_(2)Te_(2.62)S_(0.08)Se_(0.3)热电材料可广泛应用于低温尤其室温条件下的热电制冷器件和温差发电电池。展开更多
文摘近年来,随着能源危机的加剧,可以将热能与电能进行直接转换的热电材料得到了广泛的关注。在众多热电材料体系中,有机无机纳米复合热电材料具有独特优势。相比于无机材料,有机材料成本低、质量轻、机械柔韧性好、热导率较低。添加不同类型的添加材料构成纳米复合材料后,额外引入的声子-界面散射能进一步降低热导率,同时有机无机材料能带不匹配引起的载流子筛选效应进一步提升塞贝克(Seebeck)系数。因此,目前大量工作证明有机无机纳米复合热电材料有潜力获得高的热电优值(Figure of merit,ZT),在微型热电制冷器件、柔性可穿戴发电设备、温度传感器等领域均具有光明的应用前景。本文聚焦聚(3,4-乙烯二氧噻吩)∶聚(苯乙烯磺酸盐)(PEDOT∶PSS)热电材料及以其为基底构成的纳米复合材料热电性能的研究工作,综述了提升PEDOT∶PSS热电性能的物理方法、化学试剂改性法等。进一步重点讨论了加入不同类型的无机填料的PEDOT∶PSS基纳米复合材料热电性质的研究进展,并揭示了其热电性能提升的内在机制。
文摘Finding binary sequences with Large SHG ratios is very important in the field of ultrafast science, biomedical optics, high-resolution microscopy and label-free imaging. In this paper, we have demonstrated the relation between the SHG contrast ratio and the traditional Merit Factor values. And in the light from known results in Merit Factor Problems, we have shown that Legendre Sequences or Jacobi Sequences, are still the best candidates to obtain binary sequences with large SHG contrast ratios. The authors also discussed the SHG behaviors on some sequences obtained from cyclotomic classes over the finite field GF (2l) .
文摘Worldwide Interoperability for Microwave Access(WiMAX)trusts Multiple Input Multiple Output-Orthogonal Frequency Division Multiplexing(MIMO-OFDM)combination for the deployment of physical layer functions and for connecting the medium access control to the wireless media.Even though Orthogonal Frequency Division Multiplexing(OFDM)facilitates reliable digital broadband transmission in the fading wireless channels,the presence of synchro-nization errors in the form of Carrier Frequency Offset(CFO)and Time Offset(TO)adversely affect the performance of OFDM based physical layers.The objective of this work is to improve the accuracy of the frequency and the time offset estimation in the WiMAX physical layer.A method to enhance the synchro-nization accuracy byfine-tuning the merit factor of the preamble sequence is sug-gested in this paper.Also,a new preamble with improved synchronization accuracy is proposed for the WiMAX system.The performance of the proposed preamble is evaluated in a Rayleigh fading channel and the results of simulations show that the Mean Square Error(MSE)in offset estimation is significantly reduced and it outperforms the standard WiMAX preamble.
文摘The essential purpose of radar is to detect a target of interest and provide information concerning the target’s location,motion,size,and other parameters.The knowledge about the pulse trains’properties shows that a class of signals is mainly well suited to digital processing of increasing practical importance.A low autocorrelation binary sequence(LABS)is a complex combinatorial problem.The main problems of LABS are low Merit Factor(MF)and shorter length sequences.Besides,the maximum possible MF equals 12.3248 as infinity length is unable to be achieved.Therefore,this study implemented two techniques to propose a new metaheuristic algorithm based on Hybrid Modified Sine Cosine Algorithm with Cuckoo Search Algorithm(HMSCACSA)using Inverse Filtering(IF)and clipping method to achieve better results.The proposed algorithms,LABS-IF and HMSCACSA-IF,achieved better results with two large MFs equal to 12.12 and 12.6678 for lengths 231 and 237,respectively,where the optimal solutions belong to the skew-symmetric sequences.The MF outperformed up to 24.335%and 2.708%against the state-of-the-art LABS heuristic algorithm,xLastovka,and Golay,respectively.These results indicated that the proposed algorithm’s simulation had quality solutions in terms of fast convergence curve with better optimal means,and standard deviation.
基金the Science Creative Foundation of Northwestern Polytechnical UniversityNSF of Shaanxi Province+2 种基金the program of EYTPNCET of MOEthe national nature Science Foundation of China.
文摘Piezoelectric composite materials have the ability to perform both sensing and actuating functions.It is a viable candidate for smart actuation in underwater noise controlling with its higher coupling factor and lower acoustic impedance, when the piezoelectric rods are inclined to control its both the shear and the compression damping characteristics.In this paper, a simple physical model of 1-3 piezoelectric composite is advanced for maximizing the electromechanical coupling factor,the acoustic impedance,and the hydrophone figure of merit.
文摘A novel current mode active-only universal filter using four dual current output Operational Transconductance Amplifiers (OTAs) and three Operational Amplifiers (OAs) is presented. The circuit can realize low pass and high pass filter characteristics by choosing the suitable current output branches. The filter performance factors natural frequency (ω0), bandwidth , quality factor Q and transconductance gain gm are electronically tunable. The proposed circuit has very low sensitivities with respect to circuit active elements. From sensitivity analysis, it has been clearly shown that the proposed circuit has very low sensitivities with respect to the circuit active elements. The gain roll-off of high pass and low pass configuration is 18 dB/oc- tave. The proposed circuit facilitates integrability, programmability and ease of implementation.
文摘采用合金设计、真空熔炼、快速凝固、球磨制粉、冷压成形和常压烧结工艺,制备了Cu、S掺杂的n型Bi_(2)Te_(2.7)Se_(0.3)热电材料,采用XRD、SEM和ZEM-3热电测试系统等表征热电材料晶体结构、微观形貌和热电性能,研究Cu、S掺杂的n型Bi_(2)Te_(2.7)Se_(0.3)热电材料热电性能机理。结果表明:Cu_(y)Bi_(2)Te_(2.62)S_(0.08)Se_(0.3)热电材料晶体结构为R-3m空间群斜方晶系的六面体层状结构;掺杂Cu的Cu_(y)Bi_(2)Te_(2.7)Se_(0.3)热电材料,形成Cui间隙缺陷和Bi′Te反位缺陷,随着载流子(电子)浓度增加,载流子迁移率降低,电导率显著增大;掺杂S的Bi_(2)Te_(2.62-z)SzSe_(0.3)热电材料,生成化学键健能较Bi-Te强的Bi-S,抑制反位缺陷Bi′Te形成,少数(空穴)载流子浓度减小,同时增强声子对声子散射和点缺陷对声子散射,从而使晶格热导率和双极扩散热导率降低,总热导率明显降低,抑制塞贝克系数的减少;Cu、S共掺杂的协同作用,n型Cu_(y)Bi_(2)Te_(2.62-z)SzSe_(0.3)热电材料电导率增大,而热导率基本不变,由此ZT值和功率因子显著提高;在300~400 K温度范围内,Cu_(0.03)Bi_(2)Te_(2.62)S_(0.08)Se_(0.3)的电导率约为7.0×10^(4)S/m,塞贝克系数约为220μV/K,功率因子约为2.4 m W/(m·K^(2)),热电优值(ZT值)约为1.0。Cu_(0.03)Bi_(2)Te_(2.62)S_(0.08)Se_(0.3)热电材料可广泛应用于低温尤其室温条件下的热电制冷器件和温差发电电池。
