This study used a three-dimensional numerical model of a proton exchange membrane fuel cell with five types of channels:a smooth channel(Case 1);eight rectangular baffles were arranged in the upstream(Case 2),midstrea...This study used a three-dimensional numerical model of a proton exchange membrane fuel cell with five types of channels:a smooth channel(Case 1);eight rectangular baffles were arranged in the upstream(Case 2),midstream(Case 3),downstream(Case 4),and the entire cathode flow channel(Case 5)to study the effects of baffle position on mass transport,power density,net power,etc.Moreover,the effects of back pressure and humidity on the voltage were investigated.Results showed that compared to smooth channels,the oxygen and water transport facilitation at the diffusion layer-channel interface were added 11.53%-20.60%and 7.81%-9.80%at 1.68 A·cm^(-2)by adding baffles.The closer the baffles were to upstream,the higher the total oxygen flux,but the lower the flux uniformity the worse the water removal.The oxygen flux of upstream baffles was 8.14%higher than that of downstream baffles,but oxygen flux uniformity decreased by 18.96%at 1.68 A·cm^(-2).The order of water removal and voltage improvement was Case 4>Case 5>Case 3>Case 2>Case 1.Net power of Case 4 was 9.87%higher than that of the smooth channel.To the Case 4,when the cell worked under low back pressure or high humidity,the voltage increments were higher.The potential increment for the back pressure of 0 atm was 0.9%higher than that of 2 atm(1 atm=101.325 kPa).The potential increment for the humidity of 100%was 7.89%higher than that of 50%.展开更多
Intra porous fibrous membranes have enhanced metal ionic adsorption and oil separation abilities than those of intra nonporous fibrous membrane.In this paper,we prepared highly intra porous fibrous poly(vinylidene flu...Intra porous fibrous membranes have enhanced metal ionic adsorption and oil separation abilities than those of intra nonporous fibrous membrane.In this paper,we prepared highly intra porous fibrous poly(vinylidene fluoride)(PVDF)membranes using an innovated water-mediated electrospinning approach.FTIR-ATR and XRD techniques confirmed the conversion of non-polarα-phase to polarβ-phase in electrospun membranes.The porous fibrous membrane M–16 had adsorbed oil almost 120%and metal adsorption around 15%,12%,5%,13%respectively for Pb^(2+),Cd^(2+),Cu^(2+)and Zn^(2+),which are larger than the counterpart of nonporous M–18.The nonporous fibrous membranes have better peak to peak output voltage(Vp-Vp)2 to 3 times than the porous fibrous membranes(M–16).The results show apparent potential applications in wastewater/oil spill treatment as well as piezoelectric sensors.展开更多
This work is concentrated on elucidating the mechanism of the electric field enhanced water dissociation. A simple model was established for the theoretical current-voltage characteristics in water dissociation proces...This work is concentrated on elucidating the mechanism of the electric field enhanced water dissociation. A simple model was established for the theoretical current-voltage characteristics in water dissociation process on a bipolar membrane based on the existence of a depletion layer and Onsager's theory. Particular attention was given to the influence of applied voltage on depletion thickness and the dissociation constant. The factors on the water splitting process, such as water diffusivity, water content, ion exchange capacity, temperature, relative permittivity, etc. Were adequately analysed based on the derived model equations and several suggestions were proposed for decreasing the applied voltage in practical operation. The water dissociation tests were conducted and compared with both the theoretical calculation and the measured current-voltage curves reported in the literature, which showed a very good prediction to practical current-voltage behavior of a bipolar membrane at high current densities when the splitting of water actually commenced.展开更多
基金financially supported by the Science&Technology Project of Beijing Education Committee(KM202210005013)National Natural Science Foundation of China(52306180)。
文摘This study used a three-dimensional numerical model of a proton exchange membrane fuel cell with five types of channels:a smooth channel(Case 1);eight rectangular baffles were arranged in the upstream(Case 2),midstream(Case 3),downstream(Case 4),and the entire cathode flow channel(Case 5)to study the effects of baffle position on mass transport,power density,net power,etc.Moreover,the effects of back pressure and humidity on the voltage were investigated.Results showed that compared to smooth channels,the oxygen and water transport facilitation at the diffusion layer-channel interface were added 11.53%-20.60%and 7.81%-9.80%at 1.68 A·cm^(-2)by adding baffles.The closer the baffles were to upstream,the higher the total oxygen flux,but the lower the flux uniformity the worse the water removal.The oxygen flux of upstream baffles was 8.14%higher than that of downstream baffles,but oxygen flux uniformity decreased by 18.96%at 1.68 A·cm^(-2).The order of water removal and voltage improvement was Case 4>Case 5>Case 3>Case 2>Case 1.Net power of Case 4 was 9.87%higher than that of the smooth channel.To the Case 4,when the cell worked under low back pressure or high humidity,the voltage increments were higher.The potential increment for the back pressure of 0 atm was 0.9%higher than that of 2 atm(1 atm=101.325 kPa).The potential increment for the humidity of 100%was 7.89%higher than that of 50%.
基金This work was supported by the Natural Science Foundation of China(Grant No.51372042,51872053)Guangdong Provincial Natural Science Foundation(2015A030308004)+1 种基金the NSFCGuangdong Joint Fund(Grant No.U1501246)the Dongguan City Frontier Research Project(2019622101006)and the Advanced Energy Science and Technology Guangdong Provincial Laboratory Foshan Branch-Foshan Xianhu Laboratory Open Fund-Key Project(Grant No.XHT2020-011).
文摘Intra porous fibrous membranes have enhanced metal ionic adsorption and oil separation abilities than those of intra nonporous fibrous membrane.In this paper,we prepared highly intra porous fibrous poly(vinylidene fluoride)(PVDF)membranes using an innovated water-mediated electrospinning approach.FTIR-ATR and XRD techniques confirmed the conversion of non-polarα-phase to polarβ-phase in electrospun membranes.The porous fibrous membrane M–16 had adsorbed oil almost 120%and metal adsorption around 15%,12%,5%,13%respectively for Pb^(2+),Cd^(2+),Cu^(2+)and Zn^(2+),which are larger than the counterpart of nonporous M–18.The nonporous fibrous membranes have better peak to peak output voltage(Vp-Vp)2 to 3 times than the porous fibrous membranes(M–16).The results show apparent potential applications in wastewater/oil spill treatment as well as piezoelectric sensors.
基金Supported by the National Natural Science Foundation of China (No. 29976040), the Natural Science Foundation of Anhui Province (No. 99045431) and Youth Foundation of USTC.
文摘This work is concentrated on elucidating the mechanism of the electric field enhanced water dissociation. A simple model was established for the theoretical current-voltage characteristics in water dissociation process on a bipolar membrane based on the existence of a depletion layer and Onsager's theory. Particular attention was given to the influence of applied voltage on depletion thickness and the dissociation constant. The factors on the water splitting process, such as water diffusivity, water content, ion exchange capacity, temperature, relative permittivity, etc. Were adequately analysed based on the derived model equations and several suggestions were proposed for decreasing the applied voltage in practical operation. The water dissociation tests were conducted and compared with both the theoretical calculation and the measured current-voltage curves reported in the literature, which showed a very good prediction to practical current-voltage behavior of a bipolar membrane at high current densities when the splitting of water actually commenced.
