Effect of multiple alloying elements (Ga, Nb, Zr, Hf and Pr) on microstructure and magnetic properties of nanocomposite Nd 9- x Pr x Fe 86.5- y-z-m-n Ga y Nb z Zr m Hf n B 4.5 ( ...Effect of multiple alloying elements (Ga, Nb, Zr, Hf and Pr) on microstructure and magnetic properties of nanocomposite Nd 9- x Pr x Fe 86.5- y-z-m-n Ga y Nb z Zr m Hf n B 4.5 ( x =0, 2 25; y, z, m, n =0.5, 1.0) ribbons was investigated by a L 16 (2 15 ) orthogonal experiment. The results show that the addition of multiple alloying elements can effectively reduce the grain size of Nd 2Fe 14 B and α Fe phases and promote amorphous phase to occur at low wheel speed. No inhomogeneous growth of grains was found in annealed ribbons, but a large amount of additives would results in irregularity of Nd 2Fe 14 B and α Fe grains. On the other hand, addition of multiple alloying elements has complex effects on magnetic properties due to interactions between alloying elements. When the content of Nb is 0.5%, increasing the content of Pr and Ga and decreasing the content of Zr and Hf can improve the magnetic properties effectively. The optimum magnetic properties were obtained in Nd 2.25 Pr 6.75 Fe 84.5 Ga 1.5 Nb 0.5 B 4.5 ribbons spun at 15 m·s -1 with J r=1.053 T, i H c=530.9 kA·m -1 ,( BH ) max =124 kJ·m -3 .展开更多
The effects of Co as a substituent for Ni on microstructure and electrochemical capacity of hydrogen storage alloys MI（NiCoMnAl）5.4 at -30- ＋80 ℃, in which the content of Co was 0, 1.31%, 2.63%, 3.94%, 5.25%, and ...The effects of Co as a substituent for Ni on microstructure and electrochemical capacity of hydrogen storage alloys MI（NiCoMnAl）5.4 at -30- ＋80 ℃, in which the content of Co was 0, 1.31%, 2.63%, 3.94%, 5.25%, and 6.56% （mass fraction）, respectively, were reported. All of the alloys were prepared by vacuum induction melting followed by melt-spinning. It is found that the electrochemical capacity of alloys at different temperature depends upon the compositions and preparation methods. The electrochemical capacity of alloys increases at higher temperature （40 - 80 ℃ ） and decreases at lower temperature （ - 30 - 0 ℃ ） with an increasing cobalt content. With an increasing temperature, melt-spinning is more favorable for improved capacity of the alloys than casting. Analyses of the charging/discharging potential curves illustrate that higher cobalt content and melt-spinning techniques are more effective to increase the capacity at higher temperature because of the higher hydrogen evolution potential. On the contrary, the capacity of alloys at lower temperature can be increased by decreasing cobalt content and casting, which is ascribed to higher hydrogen evolution potential and delayed hydrogen evolution reaction, as well as reduced potential drop in the charging/discharging process. XRD patterns confirm that all of the specimens present a single hexagonal CaCu5-type structure and an increased lattice parameters with increasing Co content. The FWHM of the main peak of melt-spun ribbons reduces because of more homogeneous composition and less lattice strain defects.展开更多
Amorphous （Nd,Pr）13Fe80Nb1B6 ribbons were crystallized at 670-730°C for 5-25 min to study the effects of isothermal crystallization on their behavior and magnetic properties. XRD results indicate that the isoth...Amorphous （Nd,Pr）13Fe80Nb1B6 ribbons were crystallized at 670-730°C for 5-25 min to study the effects of isothermal crystallization on their behavior and magnetic properties. XRD results indicate that the isothermal incubation time is 12, 5, and less than 5 min at 670, 700, and 730°C, respectively. High coercivities, with the maximum value of iHc = 1616 kA/m at 700°C for 19 min, measured by a physical property measurement system, are obtained in the crystallized ribbons. This is mainly attributed to the addition of Pr and Nb, because Pr2Fe14B has a higher anisotropic field than Nd2Fe14B, and Nb enriched in the grain boundary regions can not only reduce the exchange-coupling effects among hard grains, but also impede grain growth during the crystallization process. In addition, it should also be related to the characteristics of the furnace that the authors designed.展开更多
The structure and magnetic hysteresis properties of the cast Sm1-xZrx(Fe0.92Ti0.08)10(x = 0-0.3)alloys and melt-spun ribbons prepared from them were studied.In the cast alloy with x>0.2, a considerable amount of th...The structure and magnetic hysteresis properties of the cast Sm1-xZrx(Fe0.92Ti0.08)10(x = 0-0.3)alloys and melt-spun ribbons prepared from them were studied.In the cast alloy with x>0.2, a considerable amount of the eutectic phase is found in the SEM micrographs.Analysis of the temperature dependences of the magnetic susceptibility and XRD patterns allows amorphous state in the as-spun ribbons with x>0.2 to be determined.The specific magnetization measured in a field of 17 kOe and remanence decrease with increasing annealing temperature from 800 to 900 ℃ and weakly depend on Zr concentration.The maximal value of coercivity Hc = 4.7 kOe is obtained on the ribbons with x = 0.2 after annealing at 850℃ for 10 min.After additional hydrogenation of the ribbons,both the coercivity and remanence increase by 54% and 7%,respectively.展开更多
This study reports the stabilization of the RFe12-type based compounds where part of R and Fe are substituted with Zr and Co and Si, respectively, in order to examine whether these rare-earth-lean materials are suitab...This study reports the stabilization of the RFe12-type based compounds where part of R and Fe are substituted with Zr and Co and Si, respectively, in order to examine whether these rare-earth-lean materials are suitable for applications as permanent magnets. Structural and magnetic characterization of the family of alloys with the general formula Nd0.4 Zr0.6 Fe10-xCoxSi2(x = 0 -3) and their melt-spun ribbons were carried out using X-ray diffraction and M€ossbauer spectroscopy. The ThMn12-type structure is obtained for all samples as the majority phase with a minority a-Fe(CoSi) phase(less than 5 wt%) as it was estimated by XRD for x = 1 and 2. The Curie temperature increases linearly with Co substitution from 561 K for x = 0 to 712 K for x = 3. The saturation magnetization decreases slightly from 130.5(x =1)to 129.1 A·m2/kg(x=3), while the anisotropy field is following the same trend.展开更多
文摘Effect of multiple alloying elements (Ga, Nb, Zr, Hf and Pr) on microstructure and magnetic properties of nanocomposite Nd 9- x Pr x Fe 86.5- y-z-m-n Ga y Nb z Zr m Hf n B 4.5 ( x =0, 2 25; y, z, m, n =0.5, 1.0) ribbons was investigated by a L 16 (2 15 ) orthogonal experiment. The results show that the addition of multiple alloying elements can effectively reduce the grain size of Nd 2Fe 14 B and α Fe phases and promote amorphous phase to occur at low wheel speed. No inhomogeneous growth of grains was found in annealed ribbons, but a large amount of additives would results in irregularity of Nd 2Fe 14 B and α Fe grains. On the other hand, addition of multiple alloying elements has complex effects on magnetic properties due to interactions between alloying elements. When the content of Nb is 0.5%, increasing the content of Pr and Ga and decreasing the content of Zr and Hf can improve the magnetic properties effectively. The optimum magnetic properties were obtained in Nd 2.25 Pr 6.75 Fe 84.5 Ga 1.5 Nb 0.5 B 4.5 ribbons spun at 15 m·s -1 with J r=1.053 T, i H c=530.9 kA·m -1 ,( BH ) max =124 kJ·m -3 .
文摘The effects of Co as a substituent for Ni on microstructure and electrochemical capacity of hydrogen storage alloys MI（NiCoMnAl）5.4 at -30- ＋80 ℃, in which the content of Co was 0, 1.31%, 2.63%, 3.94%, 5.25%, and 6.56% （mass fraction）, respectively, were reported. All of the alloys were prepared by vacuum induction melting followed by melt-spinning. It is found that the electrochemical capacity of alloys at different temperature depends upon the compositions and preparation methods. The electrochemical capacity of alloys increases at higher temperature （40 - 80 ℃ ） and decreases at lower temperature （ - 30 - 0 ℃ ） with an increasing cobalt content. With an increasing temperature, melt-spinning is more favorable for improved capacity of the alloys than casting. Analyses of the charging/discharging potential curves illustrate that higher cobalt content and melt-spinning techniques are more effective to increase the capacity at higher temperature because of the higher hydrogen evolution potential. On the contrary, the capacity of alloys at lower temperature can be increased by decreasing cobalt content and casting, which is ascribed to higher hydrogen evolution potential and delayed hydrogen evolution reaction, as well as reduced potential drop in the charging/discharging process. XRD patterns confirm that all of the specimens present a single hexagonal CaCu5-type structure and an increased lattice parameters with increasing Co content. The FWHM of the main peak of melt-spun ribbons reduces because of more homogeneous composition and less lattice strain defects.
基金National Key Research and Development Program of China(2022YFB3505800)National Natural Science Foundation of China(51761031,51961031)Natural Science Foundation of Inner Mongolia Autonomous Region(2019MS05040)。
基金supported by the National Natural Science Foundation of China (No. 50744014)the National Basic Research Foundation (No. 2004CCA04000)+3 种基金Science and Technology Department of Zhejiang Province (Nos. 2008C21046 and 2008C11086-1)the Natural Science Foundation of Zhejiang Province,China (No. Y406389)the Research and Development Program of Ningbo Bureau of Science and Technology (No. 2006B100054)K.C.Wong Magna Found in Ningbo University
文摘Amorphous （Nd,Pr）13Fe80Nb1B6 ribbons were crystallized at 670-730°C for 5-25 min to study the effects of isothermal crystallization on their behavior and magnetic properties. XRD results indicate that the isothermal incubation time is 12, 5, and less than 5 min at 670, 700, and 730°C, respectively. High coercivities, with the maximum value of iHc = 1616 kA/m at 700°C for 19 min, measured by a physical property measurement system, are obtained in the crystallized ribbons. This is mainly attributed to the addition of Pr and Nb, because Pr2Fe14B has a higher anisotropic field than Nd2Fe14B, and Nb enriched in the grain boundary regions can not only reduce the exchange-coupling effects among hard grains, but also impede grain growth during the crystallization process. In addition, it should also be related to the characteristics of the furnace that the authors designed.
基金Project supported by BRICS STI Framework Program for Basic Research(RFFI-BRICS)(17-52-80072),NSFC-BRICS(51761145026)the State Assignment of Ministry of Education and Science of the Russian Federation(topic “Magnet”)(AAAA-A18-118020290129-5)
文摘The structure and magnetic hysteresis properties of the cast Sm1-xZrx(Fe0.92Ti0.08)10(x = 0-0.3)alloys and melt-spun ribbons prepared from them were studied.In the cast alloy with x>0.2, a considerable amount of the eutectic phase is found in the SEM micrographs.Analysis of the temperature dependences of the magnetic susceptibility and XRD patterns allows amorphous state in the as-spun ribbons with x>0.2 to be determined.The specific magnetization measured in a field of 17 kOe and remanence decrease with increasing annealing temperature from 800 to 900 ℃ and weakly depend on Zr concentration.The maximal value of coercivity Hc = 4.7 kOe is obtained on the ribbons with x = 0.2 after annealing at 850℃ for 10 min.After additional hydrogenation of the ribbons,both the coercivity and remanence increase by 54% and 7%,respectively.
基金partially supported by the Н2020-MSCA-RISE2015 INAPEM: International Network on Advanced High Energy Permanent MagnetsН2020-NMP23-2015 NOVAMAG: Novel Materials by Design for substituting Critical Raw Materialssupported by DOE DE-FG02-90ER45413
文摘This study reports the stabilization of the RFe12-type based compounds where part of R and Fe are substituted with Zr and Co and Si, respectively, in order to examine whether these rare-earth-lean materials are suitable for applications as permanent magnets. Structural and magnetic characterization of the family of alloys with the general formula Nd0.4 Zr0.6 Fe10-xCoxSi2(x = 0 -3) and their melt-spun ribbons were carried out using X-ray diffraction and M€ossbauer spectroscopy. The ThMn12-type structure is obtained for all samples as the majority phase with a minority a-Fe(CoSi) phase(less than 5 wt%) as it was estimated by XRD for x = 1 and 2. The Curie temperature increases linearly with Co substitution from 561 K for x = 0 to 712 K for x = 3. The saturation magnetization decreases slightly from 130.5(x =1)to 129.1 A·m2/kg(x=3), while the anisotropy field is following the same trend.
