Recycled waste tires when mixed with soil can play an important role as lightweight materials in retaining walls and embankments, machine foundations and railroad track beds in seismic zones. Having high damping chara...Recycled waste tires when mixed with soil can play an important role as lightweight materials in retaining walls and embankments, machine foundations and railroad track beds in seismic zones. Having high damping characteristic, rubbers can be used as either soil alternative or mixed with soil to reduce vibration when seismic loads are of great concern. Therefore, the objective of this work was to evaluate the dynamic properties of such mixtures prior to practical applications. To this reason, torsional resonant column and dynamic triaxial experiments were carried out and the effect of the important parameters like rubber content and ratio of mean grain size of rubber solids versus soil solids(D50,r/D50,s) on dynamic response of mixtures in a range of low to high shearing strain amplitude from about 4×10-4% to 2.7% were investigated. Considering engineering applications, specimens were prepared almost at the maximum dry density and optimum moisture content to model a mixture layer above the ground water table and in low precipitation region. The results show that tire inclusion significantly reduces the shear modulus and increases the damping ratio of the mixtures. Also decrease in D50,r/D50,s causes the mixture to exhibit more rubber-like behavior. Finally, normalized shear modulus versus shearing strain amplitude curve was proposed for engineering practice.展开更多
The detailed process and mechanism of colonic motility are still unclear, and colonic motility disorders are associated with numerous clinical diseases. Colonic manometry is considered to the most direct means of eval...The detailed process and mechanism of colonic motility are still unclear, and colonic motility disorders are associated with numerous clinical diseases. Colonic manometry is considered to the most direct means of evaluating colonic peristalsis. Colonic manometry has been studied for more than 30 years;however, the long duration of the examination, high risk of catheterization, huge amount of real-time data, strict catheter sterilization, and high cost of disposable equipment restrict its wide application in clinical practice. Recently, highresolution colonic manometry (HRCM) has rapidly developed into a major technique for obtaining more effective information involved in the physiology and/or pathophysiology of colonic contractile activity in colonic dysmotility patients. This review focuses on colonic motility, manometry, operation, and motor patterns, and the clinical application of HRCM. Furthermore, the limitations, future directions, and potential usefulness of HRCM in the evaluation of clinical treatment effects are also discussed.展开更多
The sedimentary, paleogeomorphological and reservoir characteristics of the Jurassic Yan’an Formation in the southwestern Ordos Basin, northwestern China, were studied by means of casting thin sections, scanning elec...The sedimentary, paleogeomorphological and reservoir characteristics of the Jurassic Yan’an Formation in the southwestern Ordos Basin, northwestern China, were studied by means of casting thin sections, scanning electron microscopy, inclusion analysis and identification of low-amplitude structures. A model for reservoir formation is established, and the controlling effects of sedimentary facies, paleotopography, low-amplitude structures and formation water on oil reservoirs are revealed. There are significant differences in the sedimentary characteristics, structural morphology and paleowater characteristics between the reservoirs above the Yan 10 Member and those in the Yan 9 to Yan 7 Members. The Yan 10 Member contains fluvial sediments, whereas the Yan 9 to Yan 7 members contain delta-plain anastomosing-river deposits. The distribution of high-permeability reservoir is controlled by pre-Jurassic paleogeomorphology and sedimentary facies. Some of these facies exhibit high porosity and high permeability in a lowpermeability background. The main hydrocarbon accumulation period was the late Early Cretaceous, filling was continuous, and the charging strength altered from weak to strong and then from strong to weak. The Yan 10 reservoir is mainly controlled by the paleogeomorphology: hydrocarbons migrated upward at a high speed through the unconformity surface, and accumulated in the favorable traps formed by paleogeomorphic structural units, such as gentle slopes or channel island. Furthermore, groundwater alternation in these areas was relatively stagnant, providing good reservoir preservation conditions. The reservoirs in the Yan 9 and higher members are controlled by the sedimentary facies, lowamplitude structure and paleowater characteristics. Hydrocarbons migrated through the three-dimensional delivery system, influenced by favorable sedimentary facies and high-salinity groundwater, then accumulated in the favorable low-amplitude structural traps that formed during the hydrocarbon production period.展开更多
Low cycle fatigue behavior of extruded AZ80 magnesium alloy was investigated under uniaxial tension-compression at different strain amplitudes and strain rates.The results show that the extruded AZ80 magnesium alloy e...Low cycle fatigue behavior of extruded AZ80 magnesium alloy was investigated under uniaxial tension-compression at different strain amplitudes and strain rates.The results show that the extruded AZ80 magnesium alloy exhibits cyclic hardening at strain amplitudes ranging from 0.4%to 1.0%,the asymmetry of hysteresis loops becomes increasingly obvious when the strain amplitude increases.Higher strain rates correspond to higher stress amplitudes,high mean stresses and short fatigue life.{10–12}extension twins play a role in the cyclic deformation under higher strain amplitudes(0.8%,1.0%).The relationship between total strain energy density and fatigue life can be described by the modified Morrow model.The effect of strain rate on the fatigue life can also be predicted by the model.展开更多
In this context,a testing system to understand rock fracturing processes induced by different dynamic disturbances under true triaxial compression was developed.The system is mainly composed of a static loading subsys...In this context,a testing system to understand rock fracturing processes induced by different dynamic disturbances under true triaxial compression was developed.The system is mainly composed of a static loading subsystem,a dynamic loading subsystem,a specimen box subsystem,and a data measurement subsystem.The static loading subsystem uses low stiffness loss frame structure technology,which greatly improves the frame stiffness in the three principal stress directions(up to 20 GN/m)and ensures the demand of the disturbance experiment in both the prepeak and postpeak stages.The disturbance loads with frequency of 0e20 Hz and stress level of 0e30 MPa were applied using large flow parallel oil source technology characterized with high heat dissipation efficiency.For the disturbance loads with frequency of 100e500 Hz and stress level of 0e30 MPa,they were realized by using high-frequency and centimeter-per-second-scale low-speed disturbance rod technology.Three rigid self-stabilizing specimen boxes were utilized to provide support for the specimen and deformation sensors,ensuring the stability and accuracy of the data obtained.To verify the performance of the true triaxial test system,disturbance experiments were conducted on granite specimens.The results show that the experimental device satisfies the requirements of original design,with an excellent repeatability and reliable testing results.展开更多
在阵列天线的波束形成设计中,对波束的低副瓣设计提出了严格要求。提出了一种优化线阵列天线副瓣抑制的幅度加权的波束形成算法。通过此加权算法在小幅度展宽波束主瓣宽度的情况下,实现副瓣抑制高达30 d B的效果。并通过对多个不同单元...在阵列天线的波束形成设计中,对波束的低副瓣设计提出了严格要求。提出了一种优化线阵列天线副瓣抑制的幅度加权的波束形成算法。通过此加权算法在小幅度展宽波束主瓣宽度的情况下,实现副瓣抑制高达30 d B的效果。并通过对多个不同单元数量的线阵列天线的方向图综合仿真计算,分析该算法参数对方向图的影响,该算法具有副瓣抑制效果好,简洁高效,易于工程实现等特点。展开更多
Cold Metal Transfer-Based Wire Arc Directed Energy Deposition(CMT-WA-DED)presents a promising avenue for the rapid fabrication of components crucial to automotive,shipbuilding,and aerospace industries.However,the susc...Cold Metal Transfer-Based Wire Arc Directed Energy Deposition(CMT-WA-DED)presents a promising avenue for the rapid fabrication of components crucial to automotive,shipbuilding,and aerospace industries.However,the susceptibility to fatigue of CMT-WA-DED-produced AZ31 Mg alloy components has impeded their widespread adoption for critical load-bearing applications.In this study,a comprehensive investigation into the fatigue behaviour of WA-DED-fabricated AZ31 Mg alloy has been carried out and compared to commercially available wrought AZ31 alloy.Our findings indicate that the as-deposited parts exhibit a lower fatigue life than wrought Mg alloy,primarily due to poor surface finish,tensile residual stress,porosity,and coarse grain microstructure inherent in the WA-DED process.Low Plasticity Burnishing(LPB)treatment is applied to mitigate these issues,which induce significant plastic deformation on the surface.This treatment resulted in a remarkable improvement of fatigue life by 42%,accompanied by a reduction in surface roughness,grain refinement and enhancement of compressive residual stress levels.Furthermore,during cyclic deformation,WA-DED specimens exhibited higher plasticity and dislocation density compared to both wrought and WA-DED+LPB specimens.A higher fraction of Low Angle Grain Boundaries(LAGBs)in WA-DED specimens contributed to multiple crack initiation sites and convoluted crack paths,ultimately leading to premature failure.In contrast,wrought and WA-DED+LPB specimens displayed a higher percentage of High Angle Grain Boundaries(HAGBs),which hindered dislocation movement and resulted in fewer crack initiation sites and less complex crack paths,thereby extending fatigue life.These findings underscore the effectiveness of LPB as a post-processing technique to enhance the fatigue performance of WA-DED-fabricated AZ31 Mg alloy components.Our study highlights the importance of LPB surface treatment on AZ31 Mg components produced by CMT-WA-DED to remove surface defects,enabling their widespread use in load-bea展开更多
文摘Recycled waste tires when mixed with soil can play an important role as lightweight materials in retaining walls and embankments, machine foundations and railroad track beds in seismic zones. Having high damping characteristic, rubbers can be used as either soil alternative or mixed with soil to reduce vibration when seismic loads are of great concern. Therefore, the objective of this work was to evaluate the dynamic properties of such mixtures prior to practical applications. To this reason, torsional resonant column and dynamic triaxial experiments were carried out and the effect of the important parameters like rubber content and ratio of mean grain size of rubber solids versus soil solids(D50,r/D50,s) on dynamic response of mixtures in a range of low to high shearing strain amplitude from about 4×10-4% to 2.7% were investigated. Considering engineering applications, specimens were prepared almost at the maximum dry density and optimum moisture content to model a mixture layer above the ground water table and in low precipitation region. The results show that tire inclusion significantly reduces the shear modulus and increases the damping ratio of the mixtures. Also decrease in D50,r/D50,s causes the mixture to exhibit more rubber-like behavior. Finally, normalized shear modulus versus shearing strain amplitude curve was proposed for engineering practice.
文摘The detailed process and mechanism of colonic motility are still unclear, and colonic motility disorders are associated with numerous clinical diseases. Colonic manometry is considered to the most direct means of evaluating colonic peristalsis. Colonic manometry has been studied for more than 30 years;however, the long duration of the examination, high risk of catheterization, huge amount of real-time data, strict catheter sterilization, and high cost of disposable equipment restrict its wide application in clinical practice. Recently, highresolution colonic manometry (HRCM) has rapidly developed into a major technique for obtaining more effective information involved in the physiology and/or pathophysiology of colonic contractile activity in colonic dysmotility patients. This review focuses on colonic motility, manometry, operation, and motor patterns, and the clinical application of HRCM. Furthermore, the limitations, future directions, and potential usefulness of HRCM in the evaluation of clinical treatment effects are also discussed.
基金National Science and Technology Major Projects(Grant No.2016ZX05050,2017ZX05001002-008)CNPC Major Projects(Grant No.2016E-0501).
文摘The sedimentary, paleogeomorphological and reservoir characteristics of the Jurassic Yan’an Formation in the southwestern Ordos Basin, northwestern China, were studied by means of casting thin sections, scanning electron microscopy, inclusion analysis and identification of low-amplitude structures. A model for reservoir formation is established, and the controlling effects of sedimentary facies, paleotopography, low-amplitude structures and formation water on oil reservoirs are revealed. There are significant differences in the sedimentary characteristics, structural morphology and paleowater characteristics between the reservoirs above the Yan 10 Member and those in the Yan 9 to Yan 7 Members. The Yan 10 Member contains fluvial sediments, whereas the Yan 9 to Yan 7 members contain delta-plain anastomosing-river deposits. The distribution of high-permeability reservoir is controlled by pre-Jurassic paleogeomorphology and sedimentary facies. Some of these facies exhibit high porosity and high permeability in a lowpermeability background. The main hydrocarbon accumulation period was the late Early Cretaceous, filling was continuous, and the charging strength altered from weak to strong and then from strong to weak. The Yan 10 reservoir is mainly controlled by the paleogeomorphology: hydrocarbons migrated upward at a high speed through the unconformity surface, and accumulated in the favorable traps formed by paleogeomorphic structural units, such as gentle slopes or channel island. Furthermore, groundwater alternation in these areas was relatively stagnant, providing good reservoir preservation conditions. The reservoirs in the Yan 9 and higher members are controlled by the sedimentary facies, lowamplitude structure and paleowater characteristics. Hydrocarbons migrated through the three-dimensional delivery system, influenced by favorable sedimentary facies and high-salinity groundwater, then accumulated in the favorable low-amplitude structural traps that formed during the hydrocarbon production period.
基金the National Basic Research Program of China(No.2013CB632205).
文摘Low cycle fatigue behavior of extruded AZ80 magnesium alloy was investigated under uniaxial tension-compression at different strain amplitudes and strain rates.The results show that the extruded AZ80 magnesium alloy exhibits cyclic hardening at strain amplitudes ranging from 0.4%to 1.0%,the asymmetry of hysteresis loops becomes increasingly obvious when the strain amplitude increases.Higher strain rates correspond to higher stress amplitudes,high mean stresses and short fatigue life.{10–12}extension twins play a role in the cyclic deformation under higher strain amplitudes(0.8%,1.0%).The relationship between total strain energy density and fatigue life can be described by the modified Morrow model.The effect of strain rate on the fatigue life can also be predicted by the model.
基金This study was financially supported by the National Natural Science Foundation of China(Grant No.51839003),for which we are grateful.
文摘In this context,a testing system to understand rock fracturing processes induced by different dynamic disturbances under true triaxial compression was developed.The system is mainly composed of a static loading subsystem,a dynamic loading subsystem,a specimen box subsystem,and a data measurement subsystem.The static loading subsystem uses low stiffness loss frame structure technology,which greatly improves the frame stiffness in the three principal stress directions(up to 20 GN/m)and ensures the demand of the disturbance experiment in both the prepeak and postpeak stages.The disturbance loads with frequency of 0e20 Hz and stress level of 0e30 MPa were applied using large flow parallel oil source technology characterized with high heat dissipation efficiency.For the disturbance loads with frequency of 100e500 Hz and stress level of 0e30 MPa,they were realized by using high-frequency and centimeter-per-second-scale low-speed disturbance rod technology.Three rigid self-stabilizing specimen boxes were utilized to provide support for the specimen and deformation sensors,ensuring the stability and accuracy of the data obtained.To verify the performance of the true triaxial test system,disturbance experiments were conducted on granite specimens.The results show that the experimental device satisfies the requirements of original design,with an excellent repeatability and reliable testing results.
文摘在阵列天线的波束形成设计中,对波束的低副瓣设计提出了严格要求。提出了一种优化线阵列天线副瓣抑制的幅度加权的波束形成算法。通过此加权算法在小幅度展宽波束主瓣宽度的情况下,实现副瓣抑制高达30 d B的效果。并通过对多个不同单元数量的线阵列天线的方向图综合仿真计算,分析该算法参数对方向图的影响,该算法具有副瓣抑制效果好,简洁高效,易于工程实现等特点。
基金supported by the Department of Science and Technology Government of India,grant number SP/YO2019/1287(G)supported by Fronius India Solutions&Skill Centre,Bengaluru and CRF NITK Surathkal.
文摘Cold Metal Transfer-Based Wire Arc Directed Energy Deposition(CMT-WA-DED)presents a promising avenue for the rapid fabrication of components crucial to automotive,shipbuilding,and aerospace industries.However,the susceptibility to fatigue of CMT-WA-DED-produced AZ31 Mg alloy components has impeded their widespread adoption for critical load-bearing applications.In this study,a comprehensive investigation into the fatigue behaviour of WA-DED-fabricated AZ31 Mg alloy has been carried out and compared to commercially available wrought AZ31 alloy.Our findings indicate that the as-deposited parts exhibit a lower fatigue life than wrought Mg alloy,primarily due to poor surface finish,tensile residual stress,porosity,and coarse grain microstructure inherent in the WA-DED process.Low Plasticity Burnishing(LPB)treatment is applied to mitigate these issues,which induce significant plastic deformation on the surface.This treatment resulted in a remarkable improvement of fatigue life by 42%,accompanied by a reduction in surface roughness,grain refinement and enhancement of compressive residual stress levels.Furthermore,during cyclic deformation,WA-DED specimens exhibited higher plasticity and dislocation density compared to both wrought and WA-DED+LPB specimens.A higher fraction of Low Angle Grain Boundaries(LAGBs)in WA-DED specimens contributed to multiple crack initiation sites and convoluted crack paths,ultimately leading to premature failure.In contrast,wrought and WA-DED+LPB specimens displayed a higher percentage of High Angle Grain Boundaries(HAGBs),which hindered dislocation movement and resulted in fewer crack initiation sites and less complex crack paths,thereby extending fatigue life.These findings underscore the effectiveness of LPB as a post-processing technique to enhance the fatigue performance of WA-DED-fabricated AZ31 Mg alloy components.Our study highlights the importance of LPB surface treatment on AZ31 Mg components produced by CMT-WA-DED to remove surface defects,enabling their widespread use in load-bea
