Wellbore instability and sand production are all common challenges in the Niger Delta oil province,resulting in high drilling and production cost as well as damage to oil facilities.The vulnerability of lithologic for...Wellbore instability and sand production are all common challenges in the Niger Delta oil province,resulting in high drilling and production cost as well as damage to oil facilities.The vulnerability of lithologic formations to wellbore instability and resultant sand production is investigated in the four delineated reservoirs of the“Areo”field,western part of Niger Delta Basin.The foundation for establishing the geomechanical properties in this study was a 1-dimensional mechanical earth model,using gamma ray(GR),density(RHOB),compressional slowness(DTC),and shear slowness(DTS)logs.Within the Areo oil field,two wells(well 001 and well 002)were correlated.The evaluated formations are still primarily composed of compacted shale and unconsolidated sandstone,with reservoir sand units exhibiting lower elastic and rock strength properties than shale units.High compressibility and porosity make sand more brittle,while low compressibility and porosity make shale stiffer due to high moduli.The maximum force that can be applied to a shale unit without causing it to fail is 17.23 MPa,which is the maximum average rock strength of the shale.It means that shale requires more vertical stress or pressure than sand does in order to deform it(15.06 MPa).The three sand prediction approaches used in the analysis of sand production predictions have cut-off values that are higher than the average values of the formations.The Schlumberger sand production index method(S/I)indicates that the reservoir has potential for sand influx in the two wells,with the average of the four reservoirs studied in wells 001 and 002 being 1.551012 psi and 1.141012 psi respectively.However,when a formation's sand production index is less than 1.241012 psi,as it is in this study,the formation is likely to produce sand.These findings support the notion that the defined sandstone units are highly unconsolidated and have a high potential for producing sands;therefore,sand control techniques must be factored into process optimization and cost reduction plan展开更多
Ultra-low porosity and permeability, inhomogeneous fracture distribution, and complex storage space together make the effectiveness evaluation of tight carbonate reservoirs difficult. Aiming at the carbonate reservoir...Ultra-low porosity and permeability, inhomogeneous fracture distribution, and complex storage space together make the effectiveness evaluation of tight carbonate reservoirs difficult. Aiming at the carbonate reservoirs of the Da＇anzhai Formation in the Longgang area of the Sichuan Basin, based on petrophysical experiments and logging response characteristics, we investigated the storage properties of matrix pores and the characteristics of fracture development to establish a method for the characterization of effectiveness of tight reservoirs. Mercury injection and nuclear magnetic resonance （NMR） experiments show that the conventional relationship between porosity and permeability cannot fully reflect the fluid flow behavior in tight matrix pores. Under reservoir conditions, the tight reservoirs still possess certain storage space and permeability, which are controlled by the characteristic structures of the matrix porosity. The degree of fracture development is crucial to the productivity and quality of tight reservoirs. By combining the fracture development similarity of the same type of reservoirs and the fracture development heterogeneity in the same block, a three-level classification method of fracture development was established on the basis of fracture porosity distribution and its cumulative features. According to the actual production data, based on the effectiveness analysis of the matrix pores and fast inversion of fracture parameters from dual laterolog data, we divided the effective reservoirs into three classes： Class I with developed fractures and pores, and high-intermediate productivity; Class II with moderately developed fractures and pores or of fractured type, and intermediate-low productivity; Class III with poorly developed fractures and matrix pores, and extremely low productivity. Accordingly log classification standards were set up. Production data shows that the classification of effective reservoirs is highly consistent with the reservoir productivity level, providing a new ap展开更多
Recently, the theory of valuations on function spaces has been rapidly growing. It is more general than the classical theory of valuations on convex bodies. In this paper, all continuous, SL(n) and translation invaria...Recently, the theory of valuations on function spaces has been rapidly growing. It is more general than the classical theory of valuations on convex bodies. In this paper, all continuous, SL(n) and translation invariant valuations on concave functions and log-concave functions are completely classified, respectively.展开更多
This study pertains to the evaluation of shale gas and rock physics properties of this area with respect to its total organic content of Sember Formation, Khiproarea, Pakistan. We use well logs data for this study. Th...This study pertains to the evaluation of shale gas and rock physics properties of this area with respect to its total organic content of Sember Formation, Khiproarea, Pakistan. We use well logs data for this study. The Khipro area is prominent in the Lower Indus Basin for its hydrocarbon (oil and gas) structural traps. In shale gas evaluation, TOC of Sember Formation is estimated. The analysis has been done with the help of the wire line data of the well Bilal North-01. The presence of shale gas in the study area is analyzed with the help of different techniques. Rock physics and petrophysical analysis have been done in order to get the properties of the area related to the shale gas evaluation.展开更多
文摘Wellbore instability and sand production are all common challenges in the Niger Delta oil province,resulting in high drilling and production cost as well as damage to oil facilities.The vulnerability of lithologic formations to wellbore instability and resultant sand production is investigated in the four delineated reservoirs of the“Areo”field,western part of Niger Delta Basin.The foundation for establishing the geomechanical properties in this study was a 1-dimensional mechanical earth model,using gamma ray(GR),density(RHOB),compressional slowness(DTC),and shear slowness(DTS)logs.Within the Areo oil field,two wells(well 001 and well 002)were correlated.The evaluated formations are still primarily composed of compacted shale and unconsolidated sandstone,with reservoir sand units exhibiting lower elastic and rock strength properties than shale units.High compressibility and porosity make sand more brittle,while low compressibility and porosity make shale stiffer due to high moduli.The maximum force that can be applied to a shale unit without causing it to fail is 17.23 MPa,which is the maximum average rock strength of the shale.It means that shale requires more vertical stress or pressure than sand does in order to deform it(15.06 MPa).The three sand prediction approaches used in the analysis of sand production predictions have cut-off values that are higher than the average values of the formations.The Schlumberger sand production index method(S/I)indicates that the reservoir has potential for sand influx in the two wells,with the average of the four reservoirs studied in wells 001 and 002 being 1.551012 psi and 1.141012 psi respectively.However,when a formation's sand production index is less than 1.241012 psi,as it is in this study,the formation is likely to produce sand.These findings support the notion that the defined sandstone units are highly unconsolidated and have a high potential for producing sands;therefore,sand control techniques must be factored into process optimization and cost reduction plan
基金co-funded by the National Natural Science Foundation of China (No.41174009)National Major Science & Technology Projects of China (Nos.2011ZX05020,2011ZX05035,2011ZX05009,2011ZX05007)
文摘Ultra-low porosity and permeability, inhomogeneous fracture distribution, and complex storage space together make the effectiveness evaluation of tight carbonate reservoirs difficult. Aiming at the carbonate reservoirs of the Da＇anzhai Formation in the Longgang area of the Sichuan Basin, based on petrophysical experiments and logging response characteristics, we investigated the storage properties of matrix pores and the characteristics of fracture development to establish a method for the characterization of effectiveness of tight reservoirs. Mercury injection and nuclear magnetic resonance （NMR） experiments show that the conventional relationship between porosity and permeability cannot fully reflect the fluid flow behavior in tight matrix pores. Under reservoir conditions, the tight reservoirs still possess certain storage space and permeability, which are controlled by the characteristic structures of the matrix porosity. The degree of fracture development is crucial to the productivity and quality of tight reservoirs. By combining the fracture development similarity of the same type of reservoirs and the fracture development heterogeneity in the same block, a three-level classification method of fracture development was established on the basis of fracture porosity distribution and its cumulative features. According to the actual production data, based on the effectiveness analysis of the matrix pores and fast inversion of fracture parameters from dual laterolog data, we divided the effective reservoirs into three classes： Class I with developed fractures and pores, and high-intermediate productivity; Class II with moderately developed fractures and pores or of fractured type, and intermediate-low productivity; Class III with poorly developed fractures and matrix pores, and extremely low productivity. Accordingly log classification standards were set up. Production data shows that the classification of effective reservoirs is highly consistent with the reservoir productivity level, providing a new ap
基金Supported by Foundation of China Scholarship Council(201808430267)the Education Department of Hunan Province(16C0635)the Natural Science Foundation of Hunan Province(2017JJ3085)
文摘Recently, the theory of valuations on function spaces has been rapidly growing. It is more general than the classical theory of valuations on convex bodies. In this paper, all continuous, SL(n) and translation invariant valuations on concave functions and log-concave functions are completely classified, respectively.
文摘This study pertains to the evaluation of shale gas and rock physics properties of this area with respect to its total organic content of Sember Formation, Khiproarea, Pakistan. We use well logs data for this study. The Khipro area is prominent in the Lower Indus Basin for its hydrocarbon (oil and gas) structural traps. In shale gas evaluation, TOC of Sember Formation is estimated. The analysis has been done with the help of the wire line data of the well Bilal North-01. The presence of shale gas in the study area is analyzed with the help of different techniques. Rock physics and petrophysical analysis have been done in order to get the properties of the area related to the shale gas evaluation.
