Quaternary silt is widely distributed in China and easily liquefies during earthquakes. To identify the influence of the dry density on the liquefaction behaviour of Quaternary silt, 40 cyclic triaxial liquefaction te...Quaternary silt is widely distributed in China and easily liquefies during earthquakes. To identify the influence of the dry density on the liquefaction behaviour of Quaternary silt, 40 cyclic triaxial liquefaction tests were performed on loose silt(dry density rd=1.460 g/cm^3) and dense silt(rd=1.586 g/cm^3) under different cyclic stress ratios(CSRs) to obtain liquefaction assessment criteria, determine the liquefaction resistance, improve the excess pore water pressure(EPWP) growth model and clarify the relationship between the shear modulus and damping ratio. The results indicate that the initial liquefaction assessment criteria for the loose and dense silts are a double-amplitude axial strain of 5% and an EPWP ratio of 1. The increase in the anti-liquefaction ability for the dense silt is more significant under lower confining pressures. The CSR of loose silt falls well within the results of the sandy silt and Fraser River silt, and the dense silt exhibits a higher liquefaction resistance than the sand-silt mixture. The relationships between the CSR and loading cycles were obtained at a failure strain of 1%. The EPWP development in the dense and loose silts complies with the "fast-stable" and "fast-gentle-sharp" growth modes, respectively. The power function model can effectively describe the EPWP growth characteristics of the dense silt. Finally, based on the liquefaction behaviour of silt, a suggestion for reinforcing silt slopes or foundations is proposed.展开更多
The liquefaction is a very significant phenomenon in clayey silty soils, silty sands and also sands. The high potential of liquefaction is generally recognized when these types of soils are laid under the hydrostatic ...The liquefaction is a very significant phenomenon in clayey silty soils, silty sands and also sands. The high potential of liquefaction is generally recognized when these types of soils are laid under the hydrostatic water table. Low plasticity silts, silty sands and sands are found as recent alluvial deposits in the western coastal part of Albania, especially in the sandy beaches of Adriatic Sea near Durres City. The aim of this study is to evaluate the soil liquefaction potential in the area of Golem. Ten CPTUs （cone penetration test with pore pressure measurements） are carried out for the site investigation of soils. In this paper, results of the CPTU based liquefaction analysis are presented. The data of two CPTUs （10 in total） are analyzed and factor of safety was found by considering different levels of hazard and ground water. The results of liquefaction potential analysis show that the soils in the area of Golem have a high risk of liquefaction.展开更多
Soil liquefaction, and the permanent deformations that frequently result from it, have caused significant damage in past earthquakes. The procedures used in contemporary geotechnical earthquake engineering practice ar...Soil liquefaction, and the permanent deformations that frequently result from it, have caused significant damage in past earthquakes. The procedures used in contemporary geotechnical earthquake engineering practice are generally based on simplified procedures for the evaluation of the liquefaction potential. The work describes a framework for performance-based earthquake engineering and its use in the development of a performance-based procedure for liquefaction hazard evaluation. The performance-based procedure will be used to show how consistent application of conventional procedures for evaluation of liquefaction potential can influence performance prediction. Implications for liquefaction-resistant design will also be discussed. The purpose is to summarize current procedures for practical prediction of liquefaction behavior, to describe recent advances in the understanding of liquefaction behavior, and to describe the incorporation of this improved understanding into new solutions for detailed modeling of soil liquefaction, Simplified procedures for evaluation of liquefaction hazards will be reviewed relatively briefly, with more details devoted to emerging knowledge about the mechanics of liquefiable soil behavior, and methods for incorporating those mechanics into improved models for performance prediction. In particular it focuses about the influence on the evaluation of Cyclic Resistance Ratio （CRR） by different in-situ tests （Cone Penetration Test （CPT）. Standard Penetration Test （SPT） and Seismic Dilatometer Marchetti Test （SDMT）） and by different shear waves velocity measurements （Down Hole D-H. Cross Hole C-H, Seismic Dilatometer Marchetti Test SDMT）.展开更多
By using the soil static and dynamic universal triaxial and torsional shear apparatus, a series of combined cyclic shear tests are performed to simulate the rotation in the principal stress direction induced by ocean ...By using the soil static and dynamic universal triaxial and torsional shear apparatus, a series of combined cyclic shear tests are performed to simulate the rotation in the principal stress direction induced by ocean wave. The tests include the cyclic preloading tests and liquefaction tests in the second loading on saturated loose sand with a relative density of 30%. The all tests are consolidated under isotropic condition. The effect of the cyclic preloading on the resistance to liquefaction of saturated loose sands under the condition of continuous rotation in the principal stress direction is investigated. Experimental data indicate that the void ratio of saturated sands has a negligible reduction after cyclic preloading. With the increase of the intensity of cyclic preloading (in the amplitude and in the number of cycles), the resistance to liquefaction in the second loading is increased continuously under the condition that the liquefaction does not occur during the cyclic preloading. The reason is that the construction of more stable structure due to the uniformity of the void and the better interlocking of the particles when the cyclic preloading is applied to the saturated sand.展开更多
基金financially supported by the National Natural Science Foundation of China (Grant No.41761144077)the CAS “Light of West China” Program (Grant No.Y6R2240240)+1 种基金the Key Research Program of Frontier Sciences,CAS (Grant No.QYZDB-SSW-DQC010)the Sichuan science and technology plan project (Grant No.2017JY0251)
文摘Quaternary silt is widely distributed in China and easily liquefies during earthquakes. To identify the influence of the dry density on the liquefaction behaviour of Quaternary silt, 40 cyclic triaxial liquefaction tests were performed on loose silt(dry density rd=1.460 g/cm^3) and dense silt(rd=1.586 g/cm^3) under different cyclic stress ratios(CSRs) to obtain liquefaction assessment criteria, determine the liquefaction resistance, improve the excess pore water pressure(EPWP) growth model and clarify the relationship between the shear modulus and damping ratio. The results indicate that the initial liquefaction assessment criteria for the loose and dense silts are a double-amplitude axial strain of 5% and an EPWP ratio of 1. The increase in the anti-liquefaction ability for the dense silt is more significant under lower confining pressures. The CSR of loose silt falls well within the results of the sandy silt and Fraser River silt, and the dense silt exhibits a higher liquefaction resistance than the sand-silt mixture. The relationships between the CSR and loading cycles were obtained at a failure strain of 1%. The EPWP development in the dense and loose silts complies with the "fast-stable" and "fast-gentle-sharp" growth modes, respectively. The power function model can effectively describe the EPWP growth characteristics of the dense silt. Finally, based on the liquefaction behaviour of silt, a suggestion for reinforcing silt slopes or foundations is proposed.
文摘The liquefaction is a very significant phenomenon in clayey silty soils, silty sands and also sands. The high potential of liquefaction is generally recognized when these types of soils are laid under the hydrostatic water table. Low plasticity silts, silty sands and sands are found as recent alluvial deposits in the western coastal part of Albania, especially in the sandy beaches of Adriatic Sea near Durres City. The aim of this study is to evaluate the soil liquefaction potential in the area of Golem. Ten CPTUs （cone penetration test with pore pressure measurements） are carried out for the site investigation of soils. In this paper, results of the CPTU based liquefaction analysis are presented. The data of two CPTUs （10 in total） are analyzed and factor of safety was found by considering different levels of hazard and ground water. The results of liquefaction potential analysis show that the soils in the area of Golem have a high risk of liquefaction.
文摘Soil liquefaction, and the permanent deformations that frequently result from it, have caused significant damage in past earthquakes. The procedures used in contemporary geotechnical earthquake engineering practice are generally based on simplified procedures for the evaluation of the liquefaction potential. The work describes a framework for performance-based earthquake engineering and its use in the development of a performance-based procedure for liquefaction hazard evaluation. The performance-based procedure will be used to show how consistent application of conventional procedures for evaluation of liquefaction potential can influence performance prediction. Implications for liquefaction-resistant design will also be discussed. The purpose is to summarize current procedures for practical prediction of liquefaction behavior, to describe recent advances in the understanding of liquefaction behavior, and to describe the incorporation of this improved understanding into new solutions for detailed modeling of soil liquefaction, Simplified procedures for evaluation of liquefaction hazards will be reviewed relatively briefly, with more details devoted to emerging knowledge about the mechanics of liquefiable soil behavior, and methods for incorporating those mechanics into improved models for performance prediction. In particular it focuses about the influence on the evaluation of Cyclic Resistance Ratio （CRR） by different in-situ tests （Cone Penetration Test （CPT）. Standard Penetration Test （SPT） and Seismic Dilatometer Marchetti Test （SDMT）） and by different shear waves velocity measurements （Down Hole D-H. Cross Hole C-H, Seismic Dilatometer Marchetti Test SDMT）.
基金the National Natural Science Foundation of China (Nos. 50579006 and 50639010)
文摘By using the soil static and dynamic universal triaxial and torsional shear apparatus, a series of combined cyclic shear tests are performed to simulate the rotation in the principal stress direction induced by ocean wave. The tests include the cyclic preloading tests and liquefaction tests in the second loading on saturated loose sand with a relative density of 30%. The all tests are consolidated under isotropic condition. The effect of the cyclic preloading on the resistance to liquefaction of saturated loose sands under the condition of continuous rotation in the principal stress direction is investigated. Experimental data indicate that the void ratio of saturated sands has a negligible reduction after cyclic preloading. With the increase of the intensity of cyclic preloading (in the amplitude and in the number of cycles), the resistance to liquefaction in the second loading is increased continuously under the condition that the liquefaction does not occur during the cyclic preloading. The reason is that the construction of more stable structure due to the uniformity of the void and the better interlocking of the particles when the cyclic preloading is applied to the saturated sand.
