This paper proposes a method of simultaneous determination of the four layer parameters （mass density, longitudinal velocity, the thickness and attenuation） of an immersed linear-viscoelastic thin layer by using the...This paper proposes a method of simultaneous determination of the four layer parameters （mass density, longitudinal velocity, the thickness and attenuation） of an immersed linear-viscoelastic thin layer by using the normally-incident reflected and transmitted ultrasonic waves. The analytical formula of the layer thickness related to the measured trans- mitted transfer functions is derived. The two determination steps of the four layer parameters are developed, in which acoustic impedance, time-of-flight and attenuation are first determined by the reflected transfer functions. Using the derived formula, it successively calculates and determines the layer thickness, longitudinal velocity and mass density by the measured transmitted transfer functions. According to the two determination steps, a more feasible and simplified measurement setups is described. It is found that only three signals （the reference waves, the reflected and transmitted waves） need to be recorded in the whole measurement for the determination of the four layer parameters. A study of the stability of the determination method against the experimental noises and the error analysis of the four layer parameters are made. This study lays the theoretical foundation of the practical measurement of a linear-viscoelastic thin layer.展开更多
用WRF v3.2.1中尺度预报模式和NCEP/NCAR再分析资料,对比研究了WRF模式中5个不同边界层参数化方案对东亚夏季风气候的模拟效果。结果表明:WRF模式对各边界层参数化方案均较为敏感,采用不同的边界层参数化方案对模拟区域内的夏季降水、...用WRF v3.2.1中尺度预报模式和NCEP/NCAR再分析资料,对比研究了WRF模式中5个不同边界层参数化方案对东亚夏季风气候的模拟效果。结果表明:WRF模式对各边界层参数化方案均较为敏感,采用不同的边界层参数化方案对模拟区域内的夏季降水、气温、环流等气候要素均可产生明显影响。选取MYJ方案和QNSE方案对500 h Pa夏季平均环流的模拟效果较好,YSU方案和QNSE方案对夏季平均日降水量模拟与再分析资料更吻合,YSU方案和MYNN2.5方案对中国东部2 m气温的模拟结果较好。不同边界层参数化方案模拟结果都显示出由于副热带高压偏强,使副热带高压第2次北跳后停留时间过短,导致长江中下游降水偏少,华北地区降水增多。通过比较YSU和QNSE边界层方案,发现YSU方案相比QNSE方案的降水差异,是由于850 h Pa水汽输送造成的。在中国大部分地区YSU方案的2 m温度比QNSE方案高,并且地面2 m气温和降水存在一定对应关系。因此合理选取边界层参数化方案可以提高数值模拟的准确性。展开更多
基金supported by the National Natural Science Foundation of China (Grant Nos. 10534040 and 40674059)the State Key Laboratory of Acoustics (IACAS) (Grant No. 200807)
文摘This paper proposes a method of simultaneous determination of the four layer parameters （mass density, longitudinal velocity, the thickness and attenuation） of an immersed linear-viscoelastic thin layer by using the normally-incident reflected and transmitted ultrasonic waves. The analytical formula of the layer thickness related to the measured trans- mitted transfer functions is derived. The two determination steps of the four layer parameters are developed, in which acoustic impedance, time-of-flight and attenuation are first determined by the reflected transfer functions. Using the derived formula, it successively calculates and determines the layer thickness, longitudinal velocity and mass density by the measured transmitted transfer functions. According to the two determination steps, a more feasible and simplified measurement setups is described. It is found that only three signals （the reference waves, the reflected and transmitted waves） need to be recorded in the whole measurement for the determination of the four layer parameters. A study of the stability of the determination method against the experimental noises and the error analysis of the four layer parameters are made. This study lays the theoretical foundation of the practical measurement of a linear-viscoelastic thin layer.
文摘用WRF v3.2.1中尺度预报模式和NCEP/NCAR再分析资料,对比研究了WRF模式中5个不同边界层参数化方案对东亚夏季风气候的模拟效果。结果表明:WRF模式对各边界层参数化方案均较为敏感,采用不同的边界层参数化方案对模拟区域内的夏季降水、气温、环流等气候要素均可产生明显影响。选取MYJ方案和QNSE方案对500 h Pa夏季平均环流的模拟效果较好,YSU方案和QNSE方案对夏季平均日降水量模拟与再分析资料更吻合,YSU方案和MYNN2.5方案对中国东部2 m气温的模拟结果较好。不同边界层参数化方案模拟结果都显示出由于副热带高压偏强,使副热带高压第2次北跳后停留时间过短,导致长江中下游降水偏少,华北地区降水增多。通过比较YSU和QNSE边界层方案,发现YSU方案相比QNSE方案的降水差异,是由于850 h Pa水汽输送造成的。在中国大部分地区YSU方案的2 m温度比QNSE方案高,并且地面2 m气温和降水存在一定对应关系。因此合理选取边界层参数化方案可以提高数值模拟的准确性。
