A comparative study of amorphous electroless Ni-W-P coatings on mild steel substrate treated by a high power diode laser and furnace annealing was presented.Effects of different laser operating parameters and furnace-...A comparative study of amorphous electroless Ni-W-P coatings on mild steel substrate treated by a high power diode laser and furnace annealing was presented.Effects of different laser operating parameters and furnace-annealing conditions on microstructures,in terms of crystallisation,pores formation and grain growth,were investigated using SEM/EDX and XRD. Corrosion behaviours of these coatings before and after various treatments were evaluated with anodic polarisation in 0.5 mol/L H2SO4 solution.The results show that the furnace-annealing produces either a mixture of nanocrystallined Ni and amorphous phases or precipitated Ni3P phase distributed in nanocrystallined Ni-based matrix,depending on annealing temperatures,whilst the laser treatment under the operating conditions only produces nanocrystallined Ni-based matrix with Ni3P precipitates.Corrosion performance of the coatings treated by both the laser and the furnace-annealing is dependent on the annealing temperature and laser operating conditions.Corrosion mechanisms of various treated-coatings were discussed in the consideration of phase constitutes and proportion,grain sizes of both Ni and Ni3P phases,pores formation and residual stresses.展开更多
为了制备具有远程可控变形且性能优越的形状记忆聚合物,采用巯基-烯点击化学法制备了PCL/CB复合材料,并用FTIR、DSC、1 H NMR和DMA对复合材料的结构、热性能以及形状记忆特性等进行表征。结果表明:交联复合材料薄膜的热转变温度为50℃,...为了制备具有远程可控变形且性能优越的形状记忆聚合物,采用巯基-烯点击化学法制备了PCL/CB复合材料,并用FTIR、DSC、1 H NMR和DMA对复合材料的结构、热性能以及形状记忆特性等进行表征。结果表明:交联复合材料薄膜的热转变温度为50℃,且当预拉伸的复合材料薄膜受到100 mW/cm^(2)强度的激光照射时,CB颗粒吸收激光光子而产生光热转换且由于各向异性链松弛和应变能释放,致使上层薄膜在受到激光照射时,结晶熔融发生形状记忆效应而收缩,与此同时下层薄膜仍然处于玻璃态,上层薄膜的收缩力使PCL/CB复合材料薄膜朝着激光照射方向发生弯曲变形。同时,弯曲角度可以通过薄膜预拉伸应变量、激光照射时间以及薄膜厚度3个参数进行调控;当预拉伸应变为300%、薄膜厚度为0.4 mm时,最大弯曲角为164°。这种具备局部可编程行为的PCL/CB复合薄膜可为光响应SMP的变形模式提供新思路。展开更多
基金Project(Y2006F40) supported by the Natural Science Foundation of Shandong Province, ChinaProject(N00003) supported by UK Northwest Science Council through Northwest Laser Engineering Consortium (NWLEC)
文摘A comparative study of amorphous electroless Ni-W-P coatings on mild steel substrate treated by a high power diode laser and furnace annealing was presented.Effects of different laser operating parameters and furnace-annealing conditions on microstructures,in terms of crystallisation,pores formation and grain growth,were investigated using SEM/EDX and XRD. Corrosion behaviours of these coatings before and after various treatments were evaluated with anodic polarisation in 0.5 mol/L H2SO4 solution.The results show that the furnace-annealing produces either a mixture of nanocrystallined Ni and amorphous phases or precipitated Ni3P phase distributed in nanocrystallined Ni-based matrix,depending on annealing temperatures,whilst the laser treatment under the operating conditions only produces nanocrystallined Ni-based matrix with Ni3P precipitates.Corrosion performance of the coatings treated by both the laser and the furnace-annealing is dependent on the annealing temperature and laser operating conditions.Corrosion mechanisms of various treated-coatings were discussed in the consideration of phase constitutes and proportion,grain sizes of both Ni and Ni3P phases,pores formation and residual stresses.
文摘为了制备具有远程可控变形且性能优越的形状记忆聚合物,采用巯基-烯点击化学法制备了PCL/CB复合材料,并用FTIR、DSC、1 H NMR和DMA对复合材料的结构、热性能以及形状记忆特性等进行表征。结果表明:交联复合材料薄膜的热转变温度为50℃,且当预拉伸的复合材料薄膜受到100 mW/cm^(2)强度的激光照射时,CB颗粒吸收激光光子而产生光热转换且由于各向异性链松弛和应变能释放,致使上层薄膜在受到激光照射时,结晶熔融发生形状记忆效应而收缩,与此同时下层薄膜仍然处于玻璃态,上层薄膜的收缩力使PCL/CB复合材料薄膜朝着激光照射方向发生弯曲变形。同时,弯曲角度可以通过薄膜预拉伸应变量、激光照射时间以及薄膜厚度3个参数进行调控;当预拉伸应变为300%、薄膜厚度为0.4 mm时,最大弯曲角为164°。这种具备局部可编程行为的PCL/CB复合薄膜可为光响应SMP的变形模式提供新思路。
