利用溶胶凝胶-丝网印刷法在氧化铝基底上制备了La1-x Sr x MnO3(x=0.3、0.4和0.5)薄膜,研究了薄膜通电发热后的热辐射特性。不同掺锶量的薄膜发热温度在90℃~360℃范围内时,红外辐射波长主要集中在4000 nm^5000 nm,发热温度越高,最大辐...利用溶胶凝胶-丝网印刷法在氧化铝基底上制备了La1-x Sr x MnO3(x=0.3、0.4和0.5)薄膜,研究了薄膜通电发热后的热辐射特性。不同掺锶量的薄膜发热温度在90℃~360℃范围内时,红外辐射波长主要集中在4000 nm^5000 nm,发热温度越高,最大辐射波长越短,而掺锶量对红外辐射光谱影响较小;掺锶量x=0.4的薄膜可实现800℃以上的加热温度,控制电压使发热温度保持在500℃时,可实现长时间稳定加热。展开更多
Gold, as the common current collector in solid oxide electrolysis cell(SOEC), is traditionally considered to be inert for oxygen evolution reaction at the anode of SOEC. Herein, gold nanoparticles were loaded onto con...Gold, as the common current collector in solid oxide electrolysis cell(SOEC), is traditionally considered to be inert for oxygen evolution reaction at the anode of SOEC. Herein, gold nanoparticles were loaded onto conventional strontium doped lanthanum manganite-yttria stabilized zirconia(LSM-YSZ) anode, which evidently improved the performance of oxygen evolution reaction at 800 °C. The current densities at 1.2 V and 1.4 V increased by 60.0% and 46.9%, respectively, after loading gold nanoparticles onto the LSM-YSZ anode. Physicochemical characterizations and electrochemical measurements suggested that the improved SOEC performance was attributed to the accelerated electron transfer of elementary process in anodic polarization reaction and the newly generated triple phase boundaries in gold nanoparticles-loaded LSMYSZ anode.展开更多
Lanthanum manganite with cation vacancies from nominal La（0.75）Sr（0.25）Mn（0.92）△（0.08）O（3-δ） nanocrystalline powder was successfully prepared at different calcination temperatures using the sol-gel method....Lanthanum manganite with cation vacancies from nominal La（0.75）Sr（0.25）Mn（0.92）△（0.08）O（3-δ） nanocrystalline powder was successfully prepared at different calcination temperatures using the sol-gel method. X-ray diffraction shows that as the calcination temperature（T（Cal）） increases, the crystal particle diameter increases, but the B-site vacancy content decreases. According to a powder diffraction profile fitting technique and transmission electron microscopy results, the vacancy content can be estimated as 0.08,0.01, and 0.005 for T（Cal） = 1073,1273, and 1473 K, respectively. Magnetization versus temperature curves show that the magnetic transition temperatures, including the Curie temperature, are influenced by both B-site vacancies and double-exchange interaction between Mn^（3＋） and Mn^（4＋） cations. A core-shell model is proposed for vacancies located on the surfaces of the crystal particles. As an application, the magnetic moment angle θ（ij） between Mn^（3＋） and Mn^（4＋） cations on the surface, which decreases with decreasing vacancy content, can be obtained.展开更多
In this paper, we reported the fuel cell performance with La0.8Sr0.2MnO3 （LSM）/Ce0.8Sm0.2O1.9 （SDC） composite cathode prepared from LSM powders of different particle sizes via the silk-printing technique. It was f...In this paper, we reported the fuel cell performance with La0.8Sr0.2MnO3 （LSM）/Ce0.8Sm0.2O1.9 （SDC） composite cathode prepared from LSM powders of different particle sizes via the silk-printing technique. It was found that the change in particle size ofLSM nanoparticle from 40 to 90 nm resulted in an increase in the maximum power density from 132 to 228 mW/cm2 at 650 ℃ with H2 as fuel and O2 as oxidant. And the polarization resistance of the electrode decreased from 2.547 to 1.034 Ω.cm2. Concerning the particle size of electrode materials, a higher activity was anticipated with smaller particles because a large number of TPB or electrode surface sites along with a higher porosity could be developed. However, this study showed that the electrode prepared with particles of larger diameter had fine and uniform microstructure resulting in higher power density and lower overpotential, where homogeneous distribution of particles and pores was beneficial for increasing the electrochemical active area and the electronic conductivity of the electrodes as well as the gas diffusion for the reactants.展开更多
文摘利用溶胶凝胶-丝网印刷法在氧化铝基底上制备了La1-x Sr x MnO3(x=0.3、0.4和0.5)薄膜,研究了薄膜通电发热后的热辐射特性。不同掺锶量的薄膜发热温度在90℃~360℃范围内时,红外辐射波长主要集中在4000 nm^5000 nm,发热温度越高,最大辐射波长越短,而掺锶量对红外辐射光谱影响较小;掺锶量x=0.4的薄膜可实现800℃以上的加热温度,控制电压使发热温度保持在500℃时,可实现长时间稳定加热。
基金financial support from the National Key R&D Program of China (Grant 2017YFA0700102)the National Natural Science Foundation of China (Grants 21573222 and 91545202)+4 种基金Dalian National Laboratory for Clean Energy (DNL180404)Dalian Institute of Chemical Physics (Grant DICP DMTO201702)Dalian Outstanding Young Scientist Foundation (Grant 2017RJ03)the Strategic Priority Research Program of the Chinese Academy of Sciences (Grant no. XDB17020200)the financial support from CAS Youth Innovation Promotion (Grant no. 2015145)
文摘Gold, as the common current collector in solid oxide electrolysis cell(SOEC), is traditionally considered to be inert for oxygen evolution reaction at the anode of SOEC. Herein, gold nanoparticles were loaded onto conventional strontium doped lanthanum manganite-yttria stabilized zirconia(LSM-YSZ) anode, which evidently improved the performance of oxygen evolution reaction at 800 °C. The current densities at 1.2 V and 1.4 V increased by 60.0% and 46.9%, respectively, after loading gold nanoparticles onto the LSM-YSZ anode. Physicochemical characterizations and electrochemical measurements suggested that the improved SOEC performance was attributed to the accelerated electron transfer of elementary process in anodic polarization reaction and the newly generated triple phase boundaries in gold nanoparticles-loaded LSMYSZ anode.
基金Project supported by the National Natural Science Foundation of China(11504078)the Key Project of the Education Department of Guizhou Province(KY2015379)+1 种基金Joint Funds of Department of Science and Technology of Guizhou Province,Liupanshui Administration of Science and Technology and Liupanshui Normal University(LH[2014]7449,LH[2014]7456)Research Foundation for Advanced Talents of Liupanshui Normal University(LPSSYKYJJ201404)
文摘Lanthanum manganite with cation vacancies from nominal La（0.75）Sr（0.25）Mn（0.92）△（0.08）O（3-δ） nanocrystalline powder was successfully prepared at different calcination temperatures using the sol-gel method. X-ray diffraction shows that as the calcination temperature（T（Cal）） increases, the crystal particle diameter increases, but the B-site vacancy content decreases. According to a powder diffraction profile fitting technique and transmission electron microscopy results, the vacancy content can be estimated as 0.08,0.01, and 0.005 for T（Cal） = 1073,1273, and 1473 K, respectively. Magnetization versus temperature curves show that the magnetic transition temperatures, including the Curie temperature, are influenced by both B-site vacancies and double-exchange interaction between Mn^（3＋） and Mn^（4＋） cations. A core-shell model is proposed for vacancies located on the surfaces of the crystal particles. As an application, the magnetic moment angle θ（ij） between Mn^（3＋） and Mn^（4＋） cations on the surface, which decreases with decreasing vacancy content, can be obtained.
基金National High Technology Research and Development Program of China(2007AA05Z135)National Natural Science Funds for Distinguished Young Scholar(50727101)
基金Project supported by National Natural Science Foundation of China (21002012, 21173042)National Basic Research Program of China (973 Program) (2013CB932902)+1 种基金Educational Commission of Jiangsu Province (JHB 2011-2)Natural Science Foundation of Jiangsu Province (BK2011589)
文摘In this paper, we reported the fuel cell performance with La0.8Sr0.2MnO3 （LSM）/Ce0.8Sm0.2O1.9 （SDC） composite cathode prepared from LSM powders of different particle sizes via the silk-printing technique. It was found that the change in particle size ofLSM nanoparticle from 40 to 90 nm resulted in an increase in the maximum power density from 132 to 228 mW/cm2 at 650 ℃ with H2 as fuel and O2 as oxidant. And the polarization resistance of the electrode decreased from 2.547 to 1.034 Ω.cm2. Concerning the particle size of electrode materials, a higher activity was anticipated with smaller particles because a large number of TPB or electrode surface sites along with a higher porosity could be developed. However, this study showed that the electrode prepared with particles of larger diameter had fine and uniform microstructure resulting in higher power density and lower overpotential, where homogeneous distribution of particles and pores was beneficial for increasing the electrochemical active area and the electronic conductivity of the electrodes as well as the gas diffusion for the reactants.
