A principle of generating the nonlinear large-amplitude internal wave in a stratified fluid tank with large cross-section is pro- posed according to the ＇jalousie＇ control mode. A new wave-maker based on the princip...A principle of generating the nonlinear large-amplitude internal wave in a stratified fluid tank with large cross-section is pro- posed according to the ＇jalousie＇ control mode. A new wave-maker based on the principle was manufactured and the experi- ments on the generation and evolution of internal solitary wave were conducted. Both the validity of the new device and ap- plicability range of the KdV-type internal soliton theory were tested. Furthermore, a measurement technique of hydrodynamic load of internal waves was developed. By means of accurately measuring slight variations of internal wave forces exerted on a slender body in the tank, their interaction characteristics were determined. It is shown that through establishing the similarity between the model scale in the stratified fluid tank and the full scale in the numerical simulation the obtained measurement re- suits of internal wave forces are confirmed to be correct.展开更多
Constructing heterojunction between two semiconductors with matched energy band structure is an effective modification method to obtain excellent photocatalysts.The experimental scheme adopts a simple solvent method t...Constructing heterojunction between two semiconductors with matched energy band structure is an effective modification method to obtain excellent photocatalysts.The experimental scheme adopts a simple solvent method to self-assemble nitrogen doped carbon dots(N-CDs)on the surface of sulfur doped carbon nitride(S-C_(3)N_(4))semiconductor throughπ-πconjugate interaction.Based on this,a novel 0D/2D S-scheme heterojunction N-CDs/S-C_(3)N_(4)hybrid was successfully prepared.The degradation kinetic constants of N-CDs/S-C_(3)N_(4)for rhodamine B(RhB)and p-nitrophenol(PNP)reached 0.23522 and 0.01342 min^(−1),repectively,which were 2.72 and 2.65 times that of S-C_(3)N_(4).The highest photocatalytic hydrogen evolution rate was observed under the simulated sunlight irradiation,which was 2.30 times that of S-C_(3)N_(4).The improvement of photocatalytic performance was mainly based on the formation of the S-scheme heterojunction between S-C_(3)N_(4)and N-CDs.The effects of internal electric field,π-πconjugate interaction and band bending promoted the photogenerated h^(+)and e^(−) with low redox ability to recombine and retained the beneficial h+and e−with strong redox ability,which contributed to the production of more active species of h^(+) and•O_(2)−,therefore the photocatalytic degradation and hydrogen evolution performance were significantly enhanced.展开更多
Similar to hydraulic fracturing(HF), the coalescence and fracture of cracks are induced within a rock under the action of an ultrasonic field, known as ultrasonic fracturing(UF). Investigating UF is important in both ...Similar to hydraulic fracturing(HF), the coalescence and fracture of cracks are induced within a rock under the action of an ultrasonic field, known as ultrasonic fracturing(UF). Investigating UF is important in both hard rock drilling and oil and gas recovery. A three-dimensional internal laser-engraved crack(3D-ILC) method was introduced to prefabricate two parallel internal cracks within the samples without any damage to the surface. The samples were subjected to UF. The mechanism of UF was elucidated by analyzing the characteristics of fracture surfaces. The crack propagation path under different ultrasonic parameters was obtained by numerical simulation based on the Paris fatigue model and compared to the experimental results of UF. The results show that the 3D-ILC method is a powerful tool for UF research.Under the action of an ultrasonic field, the fracture surface shows the characteristics of beach marks and contains powder locally, indicating that the UF mechanism includes high-cycle fatigue fracture, shear and friction, and temperature load. The two internal cracks become close under UF. The numerical result obtained by the Paris fatigue model also shows the attraction of the two cracks, consistent with the test results. The 3D-ILC method provides a new tool for the experimental study of UF. Compared to the conventional numerical methods based on the analysis of stress-strain and plastic zone, numerical simulation can be a good alternative method to obtain the crack path under UF.展开更多
Flexible risers and steel catenary risers often provide unique riser solutions for today’s deepwater field development. Accurate analysis of these slender structures, in which there are high-speed HP/HT internal flow...Flexible risers and steel catenary risers often provide unique riser solutions for today’s deepwater field development. Accurate analysis of these slender structures, in which there are high-speed HP/HT internal flows, is critical to ensure personnel and asset safety. In this study, a special global coordinate-based FEM rod model was adopted to identify and quantify the effects of internal flow and hydrostatic pressure on both flexible and deepwater steel catenary risers, with emphasis on the latter. By incorporating internal flow induced forces into the model, it was found that the internal flow contributes a new term to the effective tension expression. For flexible risers in shallow water, internal flow and hydrostatic pressure made virtually no change to effective tension by merely altering the riser wall tension. In deep water the internal pressure wielded a dominant role in governing the riser effective tension and furthering the static configuration, while the effect of inflow velocity was negligible. With respect to the riser seabed interaction, both the seabed support and friction effect were considered, with the former modeled by a nonlinear quadratic spring, allowing for a consistent derivation of the tangent stiffness matrix. The presented application examples show that the nonlinear quadratic spring is, when using the catenary solution as an initial static profile, an efficient way to model the quasi-Winkler-type elastic seabed foundation in this finite element scheme.展开更多
During the observational period of our study, Typhoon Hagupit passed over the mooring site and induced strong near-inertial waves （NIWs）, which provided an opportunity to investigate the interactions between interna...During the observational period of our study, Typhoon Hagupit passed over the mooring site and induced strong near-inertial waves （NIWs）, which provided an opportunity to investigate the interactions between internal tides （ITs） and NIWs. Based on the mooring data, we compared the current spectra during the typhoon period and non-typhoon period in the northern South China Sea, and found that the high- frequency waves （fD1 and fD2） were evident during the former. Moreover, the observations of the current revealed that fD1 and fD2 occurred near the depth of strong vertical shear in the NlWs. In order to confirm the generation mechanism of fD1 and fD2, we compared the positions of strong vertical shear in the NIWs and strong vertical velocity in the ITs. It was established that the vertical shear of the horizontal current of the NIWs and the vertical current of the ITs contributed to the generation of fDt and fD2.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.11072267)the National High Technology Research and Development Program of China(Grant No.2008AA09Z316)the Pre-Research Foundation of PLA University of Science&Technology(Grant No.KYLYZLXY1202)
文摘A principle of generating the nonlinear large-amplitude internal wave in a stratified fluid tank with large cross-section is pro- posed according to the ＇jalousie＇ control mode. A new wave-maker based on the principle was manufactured and the experi- ments on the generation and evolution of internal solitary wave were conducted. Both the validity of the new device and ap- plicability range of the KdV-type internal soliton theory were tested. Furthermore, a measurement technique of hydrodynamic load of internal waves was developed. By means of accurately measuring slight variations of internal wave forces exerted on a slender body in the tank, their interaction characteristics were determined. It is shown that through establishing the similarity between the model scale in the stratified fluid tank and the full scale in the numerical simulation the obtained measurement re- suits of internal wave forces are confirmed to be correct.
基金support from the National Natural Science Foundation of China (Nos. 51962023, 51772139)the Natural Science Foundation of Jiangxi Province, China (No. 20192ACBL21047, 20212BAB204045)+1 种基金the Key Laboratory of Jiangxi Province for Persistent Pollutants Control and Resources Recycle (Nanchang Hangkong University) (No. ES202002077)the 2019 Project of Liaoning Education Department (No. 2019LNJC20)
文摘Constructing heterojunction between two semiconductors with matched energy band structure is an effective modification method to obtain excellent photocatalysts.The experimental scheme adopts a simple solvent method to self-assemble nitrogen doped carbon dots(N-CDs)on the surface of sulfur doped carbon nitride(S-C_(3)N_(4))semiconductor throughπ-πconjugate interaction.Based on this,a novel 0D/2D S-scheme heterojunction N-CDs/S-C_(3)N_(4)hybrid was successfully prepared.The degradation kinetic constants of N-CDs/S-C_(3)N_(4)for rhodamine B(RhB)and p-nitrophenol(PNP)reached 0.23522 and 0.01342 min^(−1),repectively,which were 2.72 and 2.65 times that of S-C_(3)N_(4).The highest photocatalytic hydrogen evolution rate was observed under the simulated sunlight irradiation,which was 2.30 times that of S-C_(3)N_(4).The improvement of photocatalytic performance was mainly based on the formation of the S-scheme heterojunction between S-C_(3)N_(4)and N-CDs.The effects of internal electric field,π-πconjugate interaction and band bending promoted the photogenerated h^(+)and e^(−) with low redox ability to recombine and retained the beneficial h+and e−with strong redox ability,which contributed to the production of more active species of h^(+) and•O_(2)−,therefore the photocatalytic degradation and hydrogen evolution performance were significantly enhanced.
基金supported by the National Natural Science Foundation of China (Grant Nos. 52104125, U1765204 and 51739008)
文摘Similar to hydraulic fracturing(HF), the coalescence and fracture of cracks are induced within a rock under the action of an ultrasonic field, known as ultrasonic fracturing(UF). Investigating UF is important in both hard rock drilling and oil and gas recovery. A three-dimensional internal laser-engraved crack(3D-ILC) method was introduced to prefabricate two parallel internal cracks within the samples without any damage to the surface. The samples were subjected to UF. The mechanism of UF was elucidated by analyzing the characteristics of fracture surfaces. The crack propagation path under different ultrasonic parameters was obtained by numerical simulation based on the Paris fatigue model and compared to the experimental results of UF. The results show that the 3D-ILC method is a powerful tool for UF research.Under the action of an ultrasonic field, the fracture surface shows the characteristics of beach marks and contains powder locally, indicating that the UF mechanism includes high-cycle fatigue fracture, shear and friction, and temperature load. The two internal cracks become close under UF. The numerical result obtained by the Paris fatigue model also shows the attraction of the two cracks, consistent with the test results. The 3D-ILC method provides a new tool for the experimental study of UF. Compared to the conventional numerical methods based on the analysis of stress-strain and plastic zone, numerical simulation can be a good alternative method to obtain the crack path under UF.
基金Supported by the National High-tech Research and Development Program of China (863 Program) under Grant No. 2010AA09Z303the Key Project of National Natural Science Foundation of China (Grant No. 50739004)the National Natural Science Foundation of China (Grant No. 11002135)
文摘Flexible risers and steel catenary risers often provide unique riser solutions for today’s deepwater field development. Accurate analysis of these slender structures, in which there are high-speed HP/HT internal flows, is critical to ensure personnel and asset safety. In this study, a special global coordinate-based FEM rod model was adopted to identify and quantify the effects of internal flow and hydrostatic pressure on both flexible and deepwater steel catenary risers, with emphasis on the latter. By incorporating internal flow induced forces into the model, it was found that the internal flow contributes a new term to the effective tension expression. For flexible risers in shallow water, internal flow and hydrostatic pressure made virtually no change to effective tension by merely altering the riser wall tension. In deep water the internal pressure wielded a dominant role in governing the riser effective tension and furthering the static configuration, while the effect of inflow velocity was negligible. With respect to the riser seabed interaction, both the seabed support and friction effect were considered, with the former modeled by a nonlinear quadratic spring, allowing for a consistent derivation of the tangent stiffness matrix. The presented application examples show that the nonlinear quadratic spring is, when using the catenary solution as an initial static profile, an efficient way to model the quasi-Winkler-type elastic seabed foundation in this finite element scheme.
基金Supported by the National Natural Science Foundation of China(Nos.U1133001,41030855,41376027)the National High Technology Research and Development Program of China(863 Program)(No.2013AA09A502)the NSFC-Shandong Joint Fund for Marine Science Research Centers(No.U1406401)
文摘During the observational period of our study, Typhoon Hagupit passed over the mooring site and induced strong near-inertial waves （NIWs）, which provided an opportunity to investigate the interactions between internal tides （ITs） and NIWs. Based on the mooring data, we compared the current spectra during the typhoon period and non-typhoon period in the northern South China Sea, and found that the high- frequency waves （fD1 and fD2） were evident during the former. Moreover, the observations of the current revealed that fD1 and fD2 occurred near the depth of strong vertical shear in the NlWs. In order to confirm the generation mechanism of fD1 and fD2, we compared the positions of strong vertical shear in the NIWs and strong vertical velocity in the ITs. It was established that the vertical shear of the horizontal current of the NIWs and the vertical current of the ITs contributed to the generation of fDt and fD2.
