Whether hydraulic fractures could connect multiple gas zones in the vertical plane is the key to fracturing treatment to jointly exploit coalbed methane and tight sandstone gas through integrative hydraulic fracturing...Whether hydraulic fractures could connect multiple gas zones in the vertical plane is the key to fracturing treatment to jointly exploit coalbed methane and tight sandstone gas through integrative hydraulic fracturing in tight sandstone–coal interbedded formations. Laboratory true triaxial hydraulic fracturing experiments were conducted on layered specimens with di erent combination types of natural sandstone and coal to simulate the propagation behavior of hydraulic fractures. The effects of the fracture initiation position, fracturing fluid viscosity and injection rate were discussed. The results showed that di erent fracture morphologies could be found. When initiating from coal seams, three patterns of fracture initiation and propagation were obtained:(1) The main hydraulic fracture initiated and propagated along the natural fractures and then diverged due to the effects of in situ stress and formed secondary fractures.(2) The hydraulic fracture initiated and propagated in the direction of the maximum horizontal stress.(3) Multiple fractures initiated and propagated at the same time. With the same fracturing fluid viscosity and injection rate, the hydraulic fractures initiating in sandstones had greater chances than those in coal seams to penetrate interfaces and enter neighboring layers. Excessively small or large fracturing fluid viscosity and injection rate would do harm to the vertical extension height of the induced fracture and improvement of the stimulated reservoir volume. Compared with operation parameters(fracturing fluid viscosity and injection rate), the natural weak planes in coals were considered to be the key factor that a ected the fracture propagation path. The experimental results would make some contributions to the development of tight sandstone–coal interbedded reservoirs.展开更多
The occurrence of interbeds in thick oil formations is one of the main reasons that cause the difference of remaining oil distribution. A quantitative method for predicting interbeds was proposed and the sedimentary o...The occurrence of interbeds in thick oil formations is one of the main reasons that cause the difference of remaining oil distribution. A quantitative method for predicting interbeds was proposed and the sedimentary origin and division criterion were demonstrated. The distribution of interbeds in different types of sedimentary sand bodies were predicted and analyzed by combining the theory of sedimentology and reservoir bed architectural-element analysis. The interbeds in a single well were recognized from high resolution well logs, and inter-well interbeds were predicted by using the methods of cyclothem correlation, physical properties trtmcation, and conditional simulation. Finally a 3-D model of interbed was built. Application to the Gudao Oilfield was successful.展开更多
The combination patterns and depositional characteristics of the carbonate banks are investigated based on outcrop sections, thin sections, and carbon isotopes of Ordovician in the western Tarim Basin, China. Four car...The combination patterns and depositional characteristics of the carbonate banks are investigated based on outcrop sections, thin sections, and carbon isotopes of Ordovician in the western Tarim Basin, China. Four carbonate bank combination patterns are deposited in the Ordovician, western Tarim Basin, including： Reef-Bank Complex （RBC）, Algae-Reef-Bank Interbed （ARBI）, Thick-Layer Cake Aggradation Bank （TLCAB）, and Thin-Layer Cake Retrogradation Bank （TLCRB）. All combination patterns show clear periods vertically. The RBC is mainly composed of reefs and bioclastic banks, and the dimension of the RBC depends on the scale of the reefs. Bioclastic banks deposits surround the reefs. The range of the ARBI is determined by the scale of algae-reefs, algae peloid dolomite microfacies and algal dolomite microfacies deposit alternating vertically. TLCAB and TLCRB are deposited as layer-cakes stacking in cycles and extending widely with cross bedding developed. The grains of TLCAB and TLCRB are diverse and multi-source. With the impacting of relative sea level change, biological development and geomorphology, the ARBI, TLCAB or TLCRB, RBC are successively developed from the Lower Ordovician Penglaiba Formation to the Middle Ordovician Yijianfang Formation. The depositional environment analysis of Ordovician indicates that the RBC and ARBI can form effective oil and gas reservoirs, and the TLCAB and TLCRB have the potential to form the huge scale oil and gas reservoirs and to be the crucial targets of exploration for the Ordovician carbonate banks in the future.展开更多
基金the support from the National Science and Technology Major Projects of China(Grant No.2016ZX05066)Major Program of National Natural Science Foundation of China(Grant No.51490650)PetroChina Innovation Foundation(No.2018D-5007-0307)
文摘Whether hydraulic fractures could connect multiple gas zones in the vertical plane is the key to fracturing treatment to jointly exploit coalbed methane and tight sandstone gas through integrative hydraulic fracturing in tight sandstone–coal interbedded formations. Laboratory true triaxial hydraulic fracturing experiments were conducted on layered specimens with di erent combination types of natural sandstone and coal to simulate the propagation behavior of hydraulic fractures. The effects of the fracture initiation position, fracturing fluid viscosity and injection rate were discussed. The results showed that di erent fracture morphologies could be found. When initiating from coal seams, three patterns of fracture initiation and propagation were obtained:(1) The main hydraulic fracture initiated and propagated along the natural fractures and then diverged due to the effects of in situ stress and formed secondary fractures.(2) The hydraulic fracture initiated and propagated in the direction of the maximum horizontal stress.(3) Multiple fractures initiated and propagated at the same time. With the same fracturing fluid viscosity and injection rate, the hydraulic fractures initiating in sandstones had greater chances than those in coal seams to penetrate interfaces and enter neighboring layers. Excessively small or large fracturing fluid viscosity and injection rate would do harm to the vertical extension height of the induced fracture and improvement of the stimulated reservoir volume. Compared with operation parameters(fracturing fluid viscosity and injection rate), the natural weak planes in coals were considered to be the key factor that a ected the fracture propagation path. The experimental results would make some contributions to the development of tight sandstone–coal interbedded reservoirs.
文摘The occurrence of interbeds in thick oil formations is one of the main reasons that cause the difference of remaining oil distribution. A quantitative method for predicting interbeds was proposed and the sedimentary origin and division criterion were demonstrated. The distribution of interbeds in different types of sedimentary sand bodies were predicted and analyzed by combining the theory of sedimentology and reservoir bed architectural-element analysis. The interbeds in a single well were recognized from high resolution well logs, and inter-well interbeds were predicted by using the methods of cyclothem correlation, physical properties trtmcation, and conditional simulation. Finally a 3-D model of interbed was built. Application to the Gudao Oilfield was successful.
基金financially supported by the National Natural Science Foundation of China grant(41102087)the Key Project of the National Science & Technology grant(2011ZX05005-002-010HZ,2011ZX05009-002)+1 种基金National Basic Research Program of China grant (2012CB214802)the Special Foundation for Doctoral Subjects in China University of Geosciences(Beijing) grant(2011PY0199)
文摘The combination patterns and depositional characteristics of the carbonate banks are investigated based on outcrop sections, thin sections, and carbon isotopes of Ordovician in the western Tarim Basin, China. Four carbonate bank combination patterns are deposited in the Ordovician, western Tarim Basin, including： Reef-Bank Complex （RBC）, Algae-Reef-Bank Interbed （ARBI）, Thick-Layer Cake Aggradation Bank （TLCAB）, and Thin-Layer Cake Retrogradation Bank （TLCRB）. All combination patterns show clear periods vertically. The RBC is mainly composed of reefs and bioclastic banks, and the dimension of the RBC depends on the scale of the reefs. Bioclastic banks deposits surround the reefs. The range of the ARBI is determined by the scale of algae-reefs, algae peloid dolomite microfacies and algal dolomite microfacies deposit alternating vertically. TLCAB and TLCRB are deposited as layer-cakes stacking in cycles and extending widely with cross bedding developed. The grains of TLCAB and TLCRB are diverse and multi-source. With the impacting of relative sea level change, biological development and geomorphology, the ARBI, TLCAB or TLCRB, RBC are successively developed from the Lower Ordovician Penglaiba Formation to the Middle Ordovician Yijianfang Formation. The depositional environment analysis of Ordovician indicates that the RBC and ARBI can form effective oil and gas reservoirs, and the TLCAB and TLCRB have the potential to form the huge scale oil and gas reservoirs and to be the crucial targets of exploration for the Ordovician carbonate banks in the future.
