Impact dampers are usually used to suppress single mode resonance. The goal of this paper is to clarify the difference when the impact damper suppresses the resonances of different modes. A cantilever beam equipped wi...Impact dampers are usually used to suppress single mode resonance. The goal of this paper is to clarify the difference when the impact damper suppresses the resonances of different modes. A cantilever beam equipped with the impact damper is modeled. The elastic contact of the ball and the cantilever beam is described by using the Hertz contact model. The viscous damper between the ball and the cantilever beam is modeled to consume the vibrational energy of the cantilever beam. A piecewise ordinary differential-partial differential equation of the cantilever beam is established, including equations with and without the impact damper. The vibration responses of the cantilever beam with and without the impact damper are numerically calculated. The effects of the impact absorber parameters on the vibration reduction are examined. The results show that multiple resonance peaks of the cantilever beam can be effectively suppressed by the impact damper. Specifically, all resonance amplitudes can be reduced by a larger weight ball. Moreover, the impacting gap is very effective in suppressing the vibration of the cantilever beam. More importantly, there is an optimal impacting gap for each resonance mode of the cantilever beam, but the optimal gap for each mode is different.展开更多
Elemental mercury（Hg^0）re-emissions from slurries and solutions were evaluated in a lab-scale simulated scrubber.Oxidized mercury（Hg^2 ＋）standard solution was injected into the simulated scrubber at a desired rat...Elemental mercury（Hg^0）re-emissions from slurries and solutions were evaluated in a lab-scale simulated scrubber.Oxidized mercury（Hg^2 ＋）standard solution was injected into the simulated scrubber at a desired rate to simulate absorbing and dissolving of Hg^2 ＋in the flue gas across wet flue gas desulfurization（WFGD）systems. PS analytical mercury analyzer was used to continuously determine Hg0re-emission concentrations in the carrier gas from the scrubber.Sulfite ion in the slurry of CaSO3 was validated to reduce Hg ^2＋to Hg^ 0,while no Hg ^0 re-emission occurred from slurries of CaSO4 and CaO.Transitional metal ions with low chemical valence such as Fe^2 ＋,Pb ^2＋,Ni ^2＋, AsO2^-and Cu ^＋were used to prepare solutions with concentration levels of mmol·L^-1.Reduction reaction of Hg^2 ＋to Hg 0was observed from these solutions.Reduction capabilities for the different transitional metal ions in the solutions were：Pb^2 ＋〉Cu ^＋〉Fe^ 2＋〉 AsO2^-〉Ni ^2＋.展开更多
The fatigue behavior of high speed steel （HSS） roll materials for hot rolling was researched under watercooling conditions by laser impacting. The microstructure of HSS sample and the morphologies of fatigue samples...The fatigue behavior of high speed steel （HSS） roll materials for hot rolling was researched under watercooling conditions by laser impacting. The microstructure of HSS sample and the morphologies of fatigue samples were observed by scanning electron microscope. The phase structure was detected by XRD. The morphology of situ oxide scale was observed by optical microscope, and the expansion coefficient was measured by TGA. The experiment results indicate that the cracks come into being at the carbide-matrix interface, but there are no cracks in the matrix after many times of laser impacting treatment, for the situ sample taken from the fractured roll surface, big carbides are more sensitive to the fatigue, and peel off prior to small ones. The relevant fatigue mechanisms are also discussed.展开更多
基金the National Natural Science Foundation of China(No.11772181)the Program of Shanghai Municipal Education Commission(No.2019-01-07-00-09-E0018)the Key Research Projects of Shanghai Science and Technology Commission(No.18010500100)。
文摘Impact dampers are usually used to suppress single mode resonance. The goal of this paper is to clarify the difference when the impact damper suppresses the resonances of different modes. A cantilever beam equipped with the impact damper is modeled. The elastic contact of the ball and the cantilever beam is described by using the Hertz contact model. The viscous damper between the ball and the cantilever beam is modeled to consume the vibrational energy of the cantilever beam. A piecewise ordinary differential-partial differential equation of the cantilever beam is established, including equations with and without the impact damper. The vibration responses of the cantilever beam with and without the impact damper are numerically calculated. The effects of the impact absorber parameters on the vibration reduction are examined. The results show that multiple resonance peaks of the cantilever beam can be effectively suppressed by the impact damper. Specifically, all resonance amplitudes can be reduced by a larger weight ball. Moreover, the impacting gap is very effective in suppressing the vibration of the cantilever beam. More importantly, there is an optimal impacting gap for each resonance mode of the cantilever beam, but the optimal gap for each mode is different.
基金Supported by the US Agency for International Development(USAID)cooperation agreement(486-A-00-06-000140-00)
文摘Elemental mercury（Hg^0）re-emissions from slurries and solutions were evaluated in a lab-scale simulated scrubber.Oxidized mercury（Hg^2 ＋）standard solution was injected into the simulated scrubber at a desired rate to simulate absorbing and dissolving of Hg^2 ＋in the flue gas across wet flue gas desulfurization（WFGD）systems. PS analytical mercury analyzer was used to continuously determine Hg0re-emission concentrations in the carrier gas from the scrubber.Sulfite ion in the slurry of CaSO3 was validated to reduce Hg ^2＋to Hg^ 0,while no Hg ^0 re-emission occurred from slurries of CaSO4 and CaO.Transitional metal ions with low chemical valence such as Fe^2 ＋,Pb ^2＋,Ni ^2＋, AsO2^-and Cu ^＋were used to prepare solutions with concentration levels of mmol·L^-1.Reduction reaction of Hg^2 ＋to Hg 0was observed from these solutions.Reduction capabilities for the different transitional metal ions in the solutions were：Pb^2 ＋〉Cu ^＋〉Fe^ 2＋〉 AsO2^-〉Ni ^2＋.
基金ItemSponsored by National Natural Science Foundation of China (50274028) State Key Fundamental Research Project(G19990650)
文摘The fatigue behavior of high speed steel （HSS） roll materials for hot rolling was researched under watercooling conditions by laser impacting. The microstructure of HSS sample and the morphologies of fatigue samples were observed by scanning electron microscope. The phase structure was detected by XRD. The morphology of situ oxide scale was observed by optical microscope, and the expansion coefficient was measured by TGA. The experiment results indicate that the cracks come into being at the carbide-matrix interface, but there are no cracks in the matrix after many times of laser impacting treatment, for the situ sample taken from the fractured roll surface, big carbides are more sensitive to the fatigue, and peel off prior to small ones. The relevant fatigue mechanisms are also discussed.
