Taking an oxygen enriched side-blown furnace as the prototype,a hydraulic model was established according to the similarity principle.The influence of three factors on the gas-liquid two-phase flow was analyzed,i.e.th...Taking an oxygen enriched side-blown furnace as the prototype,a hydraulic model was established according to the similarity principle.The influence of three factors on the gas-liquid two-phase flow was analyzed,i.e.the airflow speed,the submerged depth and the downward angle of the nozzle.A numerical simulation of the hydraulic model was carried out trying to find the suitable turbulence model which can describe the side-blown two-phase flow correctly by comparing the simulation results with the experimental data.The experiment shows that the airflow speed has a great influence on the flow of the water.The submerged depth of the nozzle has a relatively smaller influence on the penetration depth and the surface fluctuation height in the liquid phase.When the nozzle is at a downward angle of 15°,the penetration depth and the surface fluctuation height are reduced.It is concluded that the numerical results with the realizable k-εturbulence model are the closest to the experiment for the penetration depth,the surface fluctuation height and the bubble scale.展开更多
The differential equations of continuum mechanics are the basis of an uncountable variety of phenomena and technological processes in fluid-dynamics and related fields.These equations contain derivatives of the first ...The differential equations of continuum mechanics are the basis of an uncountable variety of phenomena and technological processes in fluid-dynamics and related fields.These equations contain derivatives of the first order with respect to time.The derivation of the equations of continuum mechanics uses the limit transitions of the tendency of the volume increment and the time increment to zero.Derivatives are used to derive the wave equation.The differential wave equation is second order in time.Therefore,increments of volume and increments of time in continuum mechanics should be considered as small but finite quantities for problems of wave formation.This is important for calculating the generation of sound waves and water hammer waves.Therefore,the Euler continuity equation with finite time increments is of interest.The finiteness of the time increment makes it possible to take into account the quadratic and cubic invariants of the strain rate tensor.This is a new branch in hydrodynamics.Quadratic and cubic invariants will be used in differential wave equations of the second and third order in time.展开更多
The Lagrangian equation of motion for solid particles in an arbitrary flow field is derived. The linear differential equation form and the general solution of this equation are obtained. Motion of solid particles in d...The Lagrangian equation of motion for solid particles in an arbitrary flow field is derived. The linear differential equation form and the general solution of this equation are obtained. Motion of solid particles in dilute solid-liquid turbulent flows is numerically solved and analysed. The K-εtwo-equation turbulence model, the volume fraction turbulence model, the mixed Eulerian-Lagrangian turbulence model, and the dense mixture turbulence model as well as the erosive wear model are developed. Using these models, the turbulent flows and the erosive wear in some hydraulic turbomachinery ducts are numerically predicted. The numerical results show good agreement with the experiments.展开更多
This study reported and discussed turbulence characteristics,such as turbulence intensity,correlation time scales,and advective length scales.The characteristic air–water time scale,including the particle chord time ...This study reported and discussed turbulence characteristics,such as turbulence intensity,correlation time scales,and advective length scales.The characteristic air–water time scale,including the particle chord time and length and their probability density functions(PDFs),was investigated.The results demonstrated that turbulence intensity was relatively greater on a rough bed in the roller length,whereas further downstream,the decay rate was higher.In addition,the relationship between turbulence intensity and dimensionless bubble count rate reflected an increase in turbulence intensity associated with the number of entrained particles.Triple decomposition analysis(TDA)was performed to determine the contributions of slow and fast turbulent components.The TDA results indicated that,regardless of bed type and inflow conditions,the sum of the band-pass(T'_(u))and high-pass(T″_(u))filtered turbulence intensities was equal to the turbulence intensity of the raw signal data(T_(u)).T″_(u) highlighted a higher turbulence intensity and larger vorticities on the rough bed for an identical inflow Froude number.Additional TDA results were presented in terms of the interfacial velocity,auto-and cross-correlation time scales,and longitudinal advection length scale,with the effects of low-and high-frequency signal components on each highlighted parameter.The analysis of the air chord time indicated an increase in the proportion of small bubbles moving downstream.The second part of this research focused on the basic properties of particle grouping and clustering.展开更多
基金Project(2018YFC1901606)supported by the National Key R&D Program of China.
文摘Taking an oxygen enriched side-blown furnace as the prototype,a hydraulic model was established according to the similarity principle.The influence of three factors on the gas-liquid two-phase flow was analyzed,i.e.the airflow speed,the submerged depth and the downward angle of the nozzle.A numerical simulation of the hydraulic model was carried out trying to find the suitable turbulence model which can describe the side-blown two-phase flow correctly by comparing the simulation results with the experimental data.The experiment shows that the airflow speed has a great influence on the flow of the water.The submerged depth of the nozzle has a relatively smaller influence on the penetration depth and the surface fluctuation height in the liquid phase.When the nozzle is at a downward angle of 15°,the penetration depth and the surface fluctuation height are reduced.It is concluded that the numerical results with the realizable k-εturbulence model are the closest to the experiment for the penetration depth,the surface fluctuation height and the bubble scale.
文摘The differential equations of continuum mechanics are the basis of an uncountable variety of phenomena and technological processes in fluid-dynamics and related fields.These equations contain derivatives of the first order with respect to time.The derivation of the equations of continuum mechanics uses the limit transitions of the tendency of the volume increment and the time increment to zero.Derivatives are used to derive the wave equation.The differential wave equation is second order in time.Therefore,increments of volume and increments of time in continuum mechanics should be considered as small but finite quantities for problems of wave formation.This is important for calculating the generation of sound waves and water hammer waves.Therefore,the Euler continuity equation with finite time increments is of interest.The finiteness of the time increment makes it possible to take into account the quadratic and cubic invariants of the strain rate tensor.This is a new branch in hydrodynamics.Quadratic and cubic invariants will be used in differential wave equations of the second and third order in time.
文摘The Lagrangian equation of motion for solid particles in an arbitrary flow field is derived. The linear differential equation form and the general solution of this equation are obtained. Motion of solid particles in dilute solid-liquid turbulent flows is numerically solved and analysed. The K-εtwo-equation turbulence model, the volume fraction turbulence model, the mixed Eulerian-Lagrangian turbulence model, and the dense mixture turbulence model as well as the erosive wear model are developed. Using these models, the turbulent flows and the erosive wear in some hydraulic turbomachinery ducts are numerically predicted. The numerical results show good agreement with the experiments.
文摘This study reported and discussed turbulence characteristics,such as turbulence intensity,correlation time scales,and advective length scales.The characteristic air–water time scale,including the particle chord time and length and their probability density functions(PDFs),was investigated.The results demonstrated that turbulence intensity was relatively greater on a rough bed in the roller length,whereas further downstream,the decay rate was higher.In addition,the relationship between turbulence intensity and dimensionless bubble count rate reflected an increase in turbulence intensity associated with the number of entrained particles.Triple decomposition analysis(TDA)was performed to determine the contributions of slow and fast turbulent components.The TDA results indicated that,regardless of bed type and inflow conditions,the sum of the band-pass(T'_(u))and high-pass(T″_(u))filtered turbulence intensities was equal to the turbulence intensity of the raw signal data(T_(u)).T″_(u) highlighted a higher turbulence intensity and larger vorticities on the rough bed for an identical inflow Froude number.Additional TDA results were presented in terms of the interfacial velocity,auto-and cross-correlation time scales,and longitudinal advection length scale,with the effects of low-and high-frequency signal components on each highlighted parameter.The analysis of the air chord time indicated an increase in the proportion of small bubbles moving downstream.The second part of this research focused on the basic properties of particle grouping and clustering.
