Taking the fluid temperature distribution along the borehole depth into account, a new quasi-three-dimensional model for vertical ground heat exchangers has been established, which provides a better understanding of t...Taking the fluid temperature distribution along the borehole depth into account, a new quasi-three-dimensional model for vertical ground heat exchangers has been established, which provides a better understanding of the heat transfer processes in the geothermal heat exchangers. On this basis the efficiency of the borehole has been defined and its analytical expression derived. Comparison with the previous two-dimensional model shows that the quasi-three-dimensional model is more rational and more accurate to depict the practical feature of the conduction of geothermal heat exchanger, and the efficiency notion can be easily used to determine the inlet and outlet temperature of the circulating fluid inside the heat exchanger.展开更多
冷热电联产(combined cooling,heat and power,CCHP)系统的效率评价指标对其优化设计、经济运行等至关重要。基于小功率燃气轮机为核心的CCHP系统基本元件的变工况典型解析特性,对比分析了CCHP系统当量火用效率、经济火用效率、总能利...冷热电联产(combined cooling,heat and power,CCHP)系统的效率评价指标对其优化设计、经济运行等至关重要。基于小功率燃气轮机为核心的CCHP系统基本元件的变工况典型解析特性,对比分析了CCHP系统当量火用效率、经济火用效率、总能利用率、节能系数等"效率"形式及其影响因素。采用不同的效率指标评价以小功率燃气轮机为原动力的2类CCHP系统的全工况性能,以说明不同效率指标的差异。分析表明,前述效率形式都不能给出完全合理的评价结果。但相对而言,节能系数能比较合理评价文中所述两种CCHP系统的优劣,但部分评价结论仍存商榷之处;CCHP系统的部件匹配及经济运行,可综合按全工况节能系数及经济火用效率来评价。展开更多
The mechanical properties and microstructure were investigated under different Zn content and heat treatment conditions in a Mg-Zn-YGd cast alloy.A part of the long period stacking order(LPSO)phases transformed to W-M...The mechanical properties and microstructure were investigated under different Zn content and heat treatment conditions in a Mg-Zn-YGd cast alloy.A part of the long period stacking order(LPSO)phases transformed to W-M^ZnaRE?phases with an increase in Zn content from 0.9 at.%to 1.8 at.%,and the ultimate tensile strength(UTS)increased from 229 MPa to 248 MPa.With solution treatment at 480°C,the content of the LPSO phase and strength sharply decreased in the Mg-1.8Zn-0.8Y-0.8Gd alloy,whereas this change was not significantly observed in the Mg-0.9Zn-O.8Y-O.8Gd alloy.After solution treatment,the elongation significantly improved and the UTS sharply decreased in both alloys.The lamellar and filminess LPSO phases were observed with aging treatment at 200℃.Moreover,the strengthening efficiency of lamellar and filminess LPSO phases was lower than that of the block LPSO phases.Therefore,the UTS of the T6 state was lower than that of the as-cast alloy.展开更多
文摘Taking the fluid temperature distribution along the borehole depth into account, a new quasi-three-dimensional model for vertical ground heat exchangers has been established, which provides a better understanding of the heat transfer processes in the geothermal heat exchangers. On this basis the efficiency of the borehole has been defined and its analytical expression derived. Comparison with the previous two-dimensional model shows that the quasi-three-dimensional model is more rational and more accurate to depict the practical feature of the conduction of geothermal heat exchanger, and the efficiency notion can be easily used to determine the inlet and outlet temperature of the circulating fluid inside the heat exchanger.
文摘冷热电联产(combined cooling,heat and power,CCHP)系统的效率评价指标对其优化设计、经济运行等至关重要。基于小功率燃气轮机为核心的CCHP系统基本元件的变工况典型解析特性,对比分析了CCHP系统当量火用效率、经济火用效率、总能利用率、节能系数等"效率"形式及其影响因素。采用不同的效率指标评价以小功率燃气轮机为原动力的2类CCHP系统的全工况性能,以说明不同效率指标的差异。分析表明,前述效率形式都不能给出完全合理的评价结果。但相对而言,节能系数能比较合理评价文中所述两种CCHP系统的优劣,但部分评价结论仍存商榷之处;CCHP系统的部件匹配及经济运行,可综合按全工况节能系数及经济火用效率来评价。
文摘The mechanical properties and microstructure were investigated under different Zn content and heat treatment conditions in a Mg-Zn-YGd cast alloy.A part of the long period stacking order(LPSO)phases transformed to W-M^ZnaRE?phases with an increase in Zn content from 0.9 at.%to 1.8 at.%,and the ultimate tensile strength(UTS)increased from 229 MPa to 248 MPa.With solution treatment at 480°C,the content of the LPSO phase and strength sharply decreased in the Mg-1.8Zn-0.8Y-0.8Gd alloy,whereas this change was not significantly observed in the Mg-0.9Zn-O.8Y-O.8Gd alloy.After solution treatment,the elongation significantly improved and the UTS sharply decreased in both alloys.The lamellar and filminess LPSO phases were observed with aging treatment at 200℃.Moreover,the strengthening efficiency of lamellar and filminess LPSO phases was lower than that of the block LPSO phases.Therefore,the UTS of the T6 state was lower than that of the as-cast alloy.
