For the compressive stress-induced failure of tunnels at depth, rock fracturing process is often closely associated with the generation of surface parallel fractures in the initial stage, and shear failure is likely t...For the compressive stress-induced failure of tunnels at depth, rock fracturing process is often closely associated with the generation of surface parallel fractures in the initial stage, and shear failure is likely to occur in the final process during the formation of shear bands, breakouts or V-shaped notches close to the excavation boundaries. However, the perfectly elastoplastic, strain-softening and elasto-brittle-plastic models cannot reasonably describe the brittle failure of hard rock tunnels under high in-situ stress conditions. These approaches often underestimate the depth of failure and overestimate the lateral extent of failure near the excavation. Based on a practical case of the mine-by test tunnel at an underground research laboratory (URL) in Canada, the influence of rock mass dilation on the depth and extent of failure and deformation is investigated using a calibrated cohesion weakening and frictional strengthening (CWFS) model. It can be found that, when modeling brittle failure of rock masses, the calibrated CWFS model with a constant dilation angle can capture the depth and extent of stress-induced brittle failure in hard rocks at a low confinement if the stress path is correctly represented, as demonstrated by the failure shape observed in the tunnel. However, using a constant dilation angle cannot simulate the nonlinear deformation behavior near the excavation boundary accurately because the dependence of rock mass dilation on confinement and plastic shear strain is not considered. It is illustrated from the numerical simulations that the proposed plastic shear strain and confinement-dependent dilation angle model in combination with the calibrated CWFS model implemented in FLAC can reasonably reveal both rock mass failure and displacement distribution in vicinity of the excavation simultaneously. The simulation results are in good agreement with the field observations and displacement measurement data.展开更多
Crushing is a size reduction process that plays a key role in both mineral processing and crushing–screening plant design. Investigations on rock crushability have become an important issue in mining operations and t...Crushing is a size reduction process that plays a key role in both mineral processing and crushing–screening plant design. Investigations on rock crushability have become an important issue in mining operations and the manufacture of industrial crusher equipment. The main objective of this research is to quantify the crushability of hard rocks based on their mineralogical and mechanical properties. For this purpose, the mineralogical, physical, and mechanical properties of various hard rocks were determined. A new compressive crushing value(CCV) testing methodology was proposed. The results obtained from CCV tests were compared with those from mineralogical inspections, rock strength as well as mechanical aggregate tests. Strong correlations were found between CCV and several rock and aggregate properties such as uniaxial compressive strength(UCS), the brittleness index(S_(20)), and aggregate impact value(AIV). Furthermore, the relationship between the mineralogical properties of the rocks and their CCVs were established. It is concluded that the proposed testing methodology is simple and highly repeatable and could be utilized as a pre-design tool in the design stage of the crushing process for rock quarries.展开更多
基金supported by China Scholarship Council and GRC/MIRARCO-Mining Innovation of Laurentian University, Canada
文摘For the compressive stress-induced failure of tunnels at depth, rock fracturing process is often closely associated with the generation of surface parallel fractures in the initial stage, and shear failure is likely to occur in the final process during the formation of shear bands, breakouts or V-shaped notches close to the excavation boundaries. However, the perfectly elastoplastic, strain-softening and elasto-brittle-plastic models cannot reasonably describe the brittle failure of hard rock tunnels under high in-situ stress conditions. These approaches often underestimate the depth of failure and overestimate the lateral extent of failure near the excavation. Based on a practical case of the mine-by test tunnel at an underground research laboratory (URL) in Canada, the influence of rock mass dilation on the depth and extent of failure and deformation is investigated using a calibrated cohesion weakening and frictional strengthening (CWFS) model. It can be found that, when modeling brittle failure of rock masses, the calibrated CWFS model with a constant dilation angle can capture the depth and extent of stress-induced brittle failure in hard rocks at a low confinement if the stress path is correctly represented, as demonstrated by the failure shape observed in the tunnel. However, using a constant dilation angle cannot simulate the nonlinear deformation behavior near the excavation boundary accurately because the dependence of rock mass dilation on confinement and plastic shear strain is not considered. It is illustrated from the numerical simulations that the proposed plastic shear strain and confinement-dependent dilation angle model in combination with the calibrated CWFS model implemented in FLAC can reasonably reveal both rock mass failure and displacement distribution in vicinity of the excavation simultaneously. The simulation results are in good agreement with the field observations and displacement measurement data.
基金financially supported by Zonguldak Bülent Ecevit University(No.2016-98150330-01)
文摘Crushing is a size reduction process that plays a key role in both mineral processing and crushing–screening plant design. Investigations on rock crushability have become an important issue in mining operations and the manufacture of industrial crusher equipment. The main objective of this research is to quantify the crushability of hard rocks based on their mineralogical and mechanical properties. For this purpose, the mineralogical, physical, and mechanical properties of various hard rocks were determined. A new compressive crushing value(CCV) testing methodology was proposed. The results obtained from CCV tests were compared with those from mineralogical inspections, rock strength as well as mechanical aggregate tests. Strong correlations were found between CCV and several rock and aggregate properties such as uniaxial compressive strength(UCS), the brittleness index(S_(20)), and aggregate impact value(AIV). Furthermore, the relationship between the mineralogical properties of the rocks and their CCVs were established. It is concluded that the proposed testing methodology is simple and highly repeatable and could be utilized as a pre-design tool in the design stage of the crushing process for rock quarries.
