Intersections and discontinuities commonly arise in surface modeling and cause problems in downstream operations. Local geometry repair, such as cover holes or replace bad surfaces by adding new surface patches for de...Intersections and discontinuities commonly arise in surface modeling and cause problems in downstream operations. Local geometry repair, such as cover holes or replace bad surfaces by adding new surface patches for dealing with inconsistencies among the confluent region, where multiple surfaces meet, is a common technique used in CAD model repair and reverse engineering. However, local geometry repair destroys the topology of original CAD model and increases the number of surface patches needed for freeform surface shape modeling. Consequently, a topology recovery technique dealing with complex freeform surface model after local geometry repair is proposed. Firstly, construct the curve network which freeform surface model; secondly, apply freeform surface fitting method determine the geometry and topology properties of recovery to create B-spline surface patches to recover the topology of trimmed ones. Corresponding to the two levels of enforcing boundary conditions on a B-spline surface, two solution schemes are presented respectively. In the first solution scheme, non-constrained B-spline surface fitting method is utilized to piecewise recover trimmed confluent surface patches and then employs global beautification technique to smoothly stitch the recovery surface patches. In the other solution scheme, constrained B-spline surface fitting technique based on discretization of boundary conditions is directly applied to recover topology of surface model after local geometry repair while achieving G~ continuity simultaneously. The presented two different schemes are applied to the consistent surface model, which consists of five trimmed confluent surface patches and a local consistent surface patch, and a machine cover model, respectively. The application results show that our topology recovery technique meets shape-preserving and Gt continuity requirements in reverse engineering. This research converts the problem of topology recovery for consistent surface model to the problem of constructing G1 patches from a gi展开更多
Symplectic geometry is a branch of differential geometry and differential topology and has its origins in the Hamiltonian formulation of classical mechanics.In the last few decades,symplectic geometry has experienced ...Symplectic geometry is a branch of differential geometry and differential topology and has its origins in the Hamiltonian formulation of classical mechanics.In the last few decades,symplectic geometry has experienced enormous progress and has had interactions with many other branches of mathematics,including enumerative geometry,low-dimensional topology,mathematical physics,Hamiltonian dynamics,integrable systems etc..展开更多
Polysurfacic tori or kideas are three-dimensional objects formed by rotating a regular polygon around a central axis. These toric shapes are referred to as “polysurfacic” because their characteristics, such as the n...Polysurfacic tori or kideas are three-dimensional objects formed by rotating a regular polygon around a central axis. These toric shapes are referred to as “polysurfacic” because their characteristics, such as the number of sides or surfaces separated by edges, can vary in a non-trivial manner depending on the degree of twisting during the revolution. We use the term “Kideas” to specifically denote these polysurfacic tori, and we represent the number of sides (referred to as “facets”) of the original polygon followed by a point, while the number of facets from which the torus is twisted during its revolution is indicated. We then explore the use of concave regular polygons to generate Kideas. We finally give acceleration for the algorithm for calculating the set of prime numbers.展开更多
In our previous works, we suggest that quantum particles are composite physical objects endowed with the geometric and topological structures of their corresponding differentiable manifolds that would allow them to im...In our previous works, we suggest that quantum particles are composite physical objects endowed with the geometric and topological structures of their corresponding differentiable manifolds that would allow them to imitate and adapt to physical environments. In this work, we show that Dirac equation in fact describes quantum particles as composite structures that are in a fluid state in which the components of the wavefunction can be identified with the stream function and the velocity potential of a potential flow formulated in the theory of classical fluids. We also show that Dirac quantum particles can manifest as standing waves which are the result of the superposition of two fluid flows moving in opposite directions. However, for a steady motion a Dirac quantum particle does not exhibit a wave motion even though it has the potential to establish a wave within its physical structure, therefore, without an external disturbance a Dirac quantum particle may be considered as a classical particle defined in classical physics. And furthermore, from the fact that there are two identical fluid flows in opposite directions within their physical structures, the fluid state model of Dirac quantum particles can be used to explain why fermions are spin-half particles.展开更多
An overview of the mathematical structure of the three-dimensional（3D） Ising model is given from the points of view of topology,algebra,and geometry.By analyzing the relationships among transfer matrices of the 3D I...An overview of the mathematical structure of the three-dimensional（3D） Ising model is given from the points of view of topology,algebra,and geometry.By analyzing the relationships among transfer matrices of the 3D Ising model,Reidemeister moves in the knot theory,Yang-Baxter and tetrahedron equations,the following facts are illustrated for the 3D Ising model.1） The complex quaternion basis constructed for the 3D Ising model naturally represents the rotation in a（3＋1）-dimensional space-time as a relativistic quantum statistical mechanics model,which is consistent with the 4-fold integrand of the partition function obtained by taking the time average.2） A unitary transformation with a matrix that is a spin representation in 2 n·l·o-space corresponds to a rotation in 2n·l·o-space,which serves to smooth all the crossings in the transfer matrices and contributes the non-trivial topological part of the partition function of the 3D Ising model.3） A tetrahedron relationship would ensure the commutativity of the transfer matrices and the integrability of the 3D Ising model,and its existence is guaranteed by the Jordan algebra and the Jordan-von Neumann-Wigner procedures.4） The unitary transformation for smoothing the crossings in the transfer matrices changes the wave functions by complex phases φx,φy,and φz.The relationship with quantum field and gauge theories and the physical significance of the weight factors are discussed in detail.The conjectured exact solution is compared with numerical results,and the singularities at/near infinite temperature are inspected.The analyticity in β=1/（kBT） of both the hard-core and the Ising models has been proved only for β〉0,not for β=0.Thus the high-temperature series cannot serve as a standard for judging a putative exact solution of the 3D Ising model.展开更多
Tensor-product B-spline surface is of great importance in computer-aided design. However, ordinary B-spline surface, whose control points must be in rectangular topology array, is not suitable for control polyhedron w...Tensor-product B-spline surface is of great importance in computer-aided design. However, ordinary B-spline surface, whose control points must be in rectangular topology array, is not suitable for control polyhedron with arbitrary topology. Based on the generalized B-spline blending functions and G1 continuous conditions, the blending matrices are derived. By means of the blending matrices, the control vertexes in irregular control polyhedron are converted to control points of piecewise B-spline patches. The resulting patches are tangent continuous. That is, irregular meshes with non-quadrilateral cells and more or fewer than four cells meeting at a point can be input and treated in the same conceptual framework as tensor-product B-splines. Practical examples are included in the paper to verify the proposed method.展开更多
The paper suggests that quantum relativistic gravity (QRG) is basically a higher dimensionality (HD) simulating relativity and non-classical effects plus a fractal Cantorian spacetime geometry (FG) simulating quantum ...The paper suggests that quantum relativistic gravity (QRG) is basically a higher dimensionality (HD) simulating relativity and non-classical effects plus a fractal Cantorian spacetime geometry (FG) simulating quantum mechanics. This more than just a conceptual equation is illustrated by integer approximation and an exact solution of the dark energy density behind cosmic expansion.展开更多
基金supported by China Postdoctoral Science Foundation(Grant No. 20110490376)National Natural Science Foundation of China (Grant No. 50575098)
文摘Intersections and discontinuities commonly arise in surface modeling and cause problems in downstream operations. Local geometry repair, such as cover holes or replace bad surfaces by adding new surface patches for dealing with inconsistencies among the confluent region, where multiple surfaces meet, is a common technique used in CAD model repair and reverse engineering. However, local geometry repair destroys the topology of original CAD model and increases the number of surface patches needed for freeform surface shape modeling. Consequently, a topology recovery technique dealing with complex freeform surface model after local geometry repair is proposed. Firstly, construct the curve network which freeform surface model; secondly, apply freeform surface fitting method determine the geometry and topology properties of recovery to create B-spline surface patches to recover the topology of trimmed ones. Corresponding to the two levels of enforcing boundary conditions on a B-spline surface, two solution schemes are presented respectively. In the first solution scheme, non-constrained B-spline surface fitting method is utilized to piecewise recover trimmed confluent surface patches and then employs global beautification technique to smoothly stitch the recovery surface patches. In the other solution scheme, constrained B-spline surface fitting technique based on discretization of boundary conditions is directly applied to recover topology of surface model after local geometry repair while achieving G~ continuity simultaneously. The presented two different schemes are applied to the consistent surface model, which consists of five trimmed confluent surface patches and a local consistent surface patch, and a machine cover model, respectively. The application results show that our topology recovery technique meets shape-preserving and Gt continuity requirements in reverse engineering. This research converts the problem of topology recovery for consistent surface model to the problem of constructing G1 patches from a gi
文摘Symplectic geometry is a branch of differential geometry and differential topology and has its origins in the Hamiltonian formulation of classical mechanics.In the last few decades,symplectic geometry has experienced enormous progress and has had interactions with many other branches of mathematics,including enumerative geometry,low-dimensional topology,mathematical physics,Hamiltonian dynamics,integrable systems etc..
文摘Polysurfacic tori or kideas are three-dimensional objects formed by rotating a regular polygon around a central axis. These toric shapes are referred to as “polysurfacic” because their characteristics, such as the number of sides or surfaces separated by edges, can vary in a non-trivial manner depending on the degree of twisting during the revolution. We use the term “Kideas” to specifically denote these polysurfacic tori, and we represent the number of sides (referred to as “facets”) of the original polygon followed by a point, while the number of facets from which the torus is twisted during its revolution is indicated. We then explore the use of concave regular polygons to generate Kideas. We finally give acceleration for the algorithm for calculating the set of prime numbers.
文摘In our previous works, we suggest that quantum particles are composite physical objects endowed with the geometric and topological structures of their corresponding differentiable manifolds that would allow them to imitate and adapt to physical environments. In this work, we show that Dirac equation in fact describes quantum particles as composite structures that are in a fluid state in which the components of the wavefunction can be identified with the stream function and the velocity potential of a potential flow formulated in the theory of classical fluids. We also show that Dirac quantum particles can manifest as standing waves which are the result of the superposition of two fluid flows moving in opposite directions. However, for a steady motion a Dirac quantum particle does not exhibit a wave motion even though it has the potential to establish a wave within its physical structure, therefore, without an external disturbance a Dirac quantum particle may be considered as a classical particle defined in classical physics. And furthermore, from the fact that there are two identical fluid flows in opposite directions within their physical structures, the fluid state model of Dirac quantum particles can be used to explain why fermions are spin-half particles.
基金Project supported by the National Natural Science Foundation of China (Grant No. 50831006)
文摘An overview of the mathematical structure of the three-dimensional（3D） Ising model is given from the points of view of topology,algebra,and geometry.By analyzing the relationships among transfer matrices of the 3D Ising model,Reidemeister moves in the knot theory,Yang-Baxter and tetrahedron equations,the following facts are illustrated for the 3D Ising model.1） The complex quaternion basis constructed for the 3D Ising model naturally represents the rotation in a（3＋1）-dimensional space-time as a relativistic quantum statistical mechanics model,which is consistent with the 4-fold integrand of the partition function obtained by taking the time average.2） A unitary transformation with a matrix that is a spin representation in 2 n·l·o-space corresponds to a rotation in 2n·l·o-space,which serves to smooth all the crossings in the transfer matrices and contributes the non-trivial topological part of the partition function of the 3D Ising model.3） A tetrahedron relationship would ensure the commutativity of the transfer matrices and the integrability of the 3D Ising model,and its existence is guaranteed by the Jordan algebra and the Jordan-von Neumann-Wigner procedures.4） The unitary transformation for smoothing the crossings in the transfer matrices changes the wave functions by complex phases φx,φy,and φz.The relationship with quantum field and gauge theories and the physical significance of the weight factors are discussed in detail.The conjectured exact solution is compared with numerical results,and the singularities at/near infinite temperature are inspected.The analyticity in β=1/（kBT） of both the hard-core and the Ising models has been proved only for β〉0,not for β=0.Thus the high-temperature series cannot serve as a standard for judging a putative exact solution of the 3D Ising model.
基金National Natural Science Foundation of China(59905013), China Hi-Tech Project Foundation(863-511-942-022)
文摘Tensor-product B-spline surface is of great importance in computer-aided design. However, ordinary B-spline surface, whose control points must be in rectangular topology array, is not suitable for control polyhedron with arbitrary topology. Based on the generalized B-spline blending functions and G1 continuous conditions, the blending matrices are derived. By means of the blending matrices, the control vertexes in irregular control polyhedron are converted to control points of piecewise B-spline patches. The resulting patches are tangent continuous. That is, irregular meshes with non-quadrilateral cells and more or fewer than four cells meeting at a point can be input and treated in the same conceptual framework as tensor-product B-splines. Practical examples are included in the paper to verify the proposed method.
文摘The paper suggests that quantum relativistic gravity (QRG) is basically a higher dimensionality (HD) simulating relativity and non-classical effects plus a fractal Cantorian spacetime geometry (FG) simulating quantum mechanics. This more than just a conceptual equation is illustrated by integer approximation and an exact solution of the dark energy density behind cosmic expansion.
