The Xinjie layered intrusion in the Panxi region,SW China,hosts both Fe-Ti oxide and platinum-group element（PGE） sulfide mineralization.The intrusion can be divided,from the base upward,into UnitsⅠ,ⅡandⅢ,in terms...The Xinjie layered intrusion in the Panxi region,SW China,hosts both Fe-Ti oxide and platinum-group element（PGE） sulfide mineralization.The intrusion can be divided,from the base upward,into UnitsⅠ,ⅡandⅢ,in terms of mineral assemblages.UnitsⅠandⅡare mainly composed of wehrlite and clino-pyroxenite, whereas UnitⅢis mainly composed of gabbro.PGE sulfide-rich layers mainly occur in Unit I, whereas thick Fe-Ti oxide-rich layers mainly occur in UnitⅢ.An ilmenite-rich layer occurs at the top of UnitⅠ.Fe-Ti oxides include magnetite and ilmenite.Small amounts of cumulus and intercumulus magnetite occur in UnitsⅠandⅡ.Cumulus magnetite grains are commonly euhedral and enclosed within olivine and clinopyroxene.They have high Cr2O3 contents ranging from 6.02 to 22.5 wt.%,indicating that they are likely an early crystallized phase from magmas.Intercumulus magnetite that usually displays ilmenite exsolution occupies the interstices between cumulus olivine crystals and coexists with interstitial clinopyroxene and plagioclase.Intercumulus magnetite has Cr2O3 ranging from 1.65 to 6.18 wt.%, lower than cumulus magnetite.The intercumulus magnetite may have crystallized from the trapped liquid.Large amounts of magnetite in UnitⅢcontains Cr2O3（＆lt;0.28 wt.%） much lower than magnetite in UnitsⅠandⅡ.The magnetite in UnitⅢis proposed to be accumulated from a Fe-Ti-rich melt.The Fe-Ti-rich melt is estimated to contain 35.9 wt.%of SiO2,26.9 wt.%of FeOt,8.2 wt.%of TiO2,13.2 wt.%of CaO, 8.3 wt.%of MgO,5.5 wt.%of Al2O3 and 1.0 wt.%of P2O5.The composition is comparable with the Fe-rich melts in the Skaergaard and Sept Iles intrusions.Paired non-reactive microstructures,granophyre pockets and ilmenite-rich intergrowths,are representative of Si-rich melt and Fe-Ti-rich melt,and are the direct evidence for the existence of an immiscible Fe-Ti-rich melt that formed from an evolved ferro-basaltic magma.展开更多
The North China Craton(NCC)is the best example of an Archean craton that has lost its stability in the Late Mesozoic.Although the cratonic destruction is generally considered to have occurred in the Eastern Block and ...The North China Craton(NCC)is the best example of an Archean craton that has lost its stability in the Late Mesozoic.Although the cratonic destruction is generally considered to have occurred in the Eastern Block and reached a peak in the Early Cretaceous,the exact areal extent of cratonic destruction is debated,especially the southern and northern margin of the NCC.Here we report geochronology,geochemical and Hf isotopic data of the Late Mesozoic granitoids from Lushi polymetal mineralization area(LPMA)in the southern margin of NCC.These results provide new insights into the destruction in the southern margin of the NCC during the Late Mesozoic.Zircon U-Pb dating indicates that eight granitoids intruded in the Late Jurassic to Early Cretaceous(136.8–154.1 Ma),respectively.Geochemical signatures define these granitoids being A-type or I-type granite that formed in an extension setting.In addition,Hf isotopic compositions of zircons from these granitoids vary in a relatively large range,withεHf(t)values and TDM2 ages ranginge from-26.1 to+15.2 and 215 to 2849 Ma,respectively.The parental magmas were likely derived from diverse sources,including materials of the partial melting of ancient lower crust and mantle-derived mafic magmas in various proportions.Combining with previous studies on the contemporaneous magma-tectonic activities in circum of NCC,we suggest that the rim of NCC was already unstabilized from the Late Jurassic in the LPMA.The subduction of the Paleo-Pacific Plate was the main trigger to the destruction of the southern margin of NCC,which was responsible for the lithospheric extension and thinning,extensive magmatism and mineralization.展开更多
The Bipindi iron ore district is located in the central section of the Nyong Complex at the northwestern margin of the Congo Craton in Southwest Cameroon.This iron district contains numerous iron mineralization hosted...The Bipindi iron ore district is located in the central section of the Nyong Complex at the northwestern margin of the Congo Craton in Southwest Cameroon.This iron district contains numerous iron mineralization hosted by the Mewongo,Bibole,Kouambo,and Zambi banded iron formations(BIFs).These BIFs contain magnetite as the main iron ore mineral associated with pyrite,and gangue minerals are quartz with minor chlorite and amphibole.The origin of iron ore from these BIFs was investigated using a combination of in-situ magnetite and whole-rock chemistry.The studied BIF ore samples have a narrow range of TFe between 30.90 wt.%and 43.20 wt.%,indicating a low-grade ore.The geochemical signatures of magnetite such as low contents of base metals(e.g.,Cu,Co,V,and Zn)and low Co/Zn ratios<0.85 indicate a hydrothermal origin.Combined with the geochemical features of these BIFs,e.g.,high Fe/Ti and Fe/Al ratios(mean>600 and>75,respectively),we suggest that magnetite was derived from a mixture of seawater and~0.1%low-temperature hydrothermal fluids in an oxidizing environment.Collectively,low-temperature hydrothermal and later metamorphic fluids were necessary for the transformation of the protolith Nyong Complex BIFs to iron ore.展开更多
The Lower Cretaceous Xiagou Formation contains the major source rocks for the crude oils discovered in the Qingxi Sag and the South Uplift in the Jiuquan Basin, northwestern China. The Xiagou Formation source rock was...The Lower Cretaceous Xiagou Formation contains the major source rocks for the crude oils discovered in the Qingxi Sag and the South Uplift in the Jiuquan Basin, northwestern China. The Xiagou Formation source rock was formed in a closed,anoxic, reducing, alkaline lacustrine environment with a high salinity. Its high content of brittle minerals is favorable for the fracturing of reservoirs in source rock formations in the Qingxi Sag. The Xiagou Formation contains a great number of fair to excellent source rocks, and their organic matter（OM） came chiefly from plankton/algae and high plants as well as possibly bacterial organisms. The Xiagou Formation source rocks mainly contain Type II OM and some Type III and Type I OM, with good oil-generating potential. The source rock maturity is mainly in the early-mature and mature stages, and its Rovalue corresponding to oil peak is about 0.8%, which is lower than classic oil peak Rovalue of 1.0%; therefore, a great deal of hydrocarbon was generated before the classic oil peak Ro= 1.0%. Mature source rock in the Xiagou Formation tends to be distributed in the older members and at a greater depth. There is a better exploration potential of tight oil in the deep Qingxi Sag.展开更多
基金supported by a National Program on Key Basic Research Project(973 Program,Grant No.2011CB808903)National Natural Science Foundation of China(Grant Nos.41073030 and 41121002)a 'CAS Hundred Talents' project under Chinese Academy of Sciences to CYW and a GIGCAS 135 project Y234041001
文摘The Xinjie layered intrusion in the Panxi region,SW China,hosts both Fe-Ti oxide and platinum-group element（PGE） sulfide mineralization.The intrusion can be divided,from the base upward,into UnitsⅠ,ⅡandⅢ,in terms of mineral assemblages.UnitsⅠandⅡare mainly composed of wehrlite and clino-pyroxenite, whereas UnitⅢis mainly composed of gabbro.PGE sulfide-rich layers mainly occur in Unit I, whereas thick Fe-Ti oxide-rich layers mainly occur in UnitⅢ.An ilmenite-rich layer occurs at the top of UnitⅠ.Fe-Ti oxides include magnetite and ilmenite.Small amounts of cumulus and intercumulus magnetite occur in UnitsⅠandⅡ.Cumulus magnetite grains are commonly euhedral and enclosed within olivine and clinopyroxene.They have high Cr2O3 contents ranging from 6.02 to 22.5 wt.%,indicating that they are likely an early crystallized phase from magmas.Intercumulus magnetite that usually displays ilmenite exsolution occupies the interstices between cumulus olivine crystals and coexists with interstitial clinopyroxene and plagioclase.Intercumulus magnetite has Cr2O3 ranging from 1.65 to 6.18 wt.%, lower than cumulus magnetite.The intercumulus magnetite may have crystallized from the trapped liquid.Large amounts of magnetite in UnitⅢcontains Cr2O3（＆lt;0.28 wt.%） much lower than magnetite in UnitsⅠandⅡ.The magnetite in UnitⅢis proposed to be accumulated from a Fe-Ti-rich melt.The Fe-Ti-rich melt is estimated to contain 35.9 wt.%of SiO2,26.9 wt.%of FeOt,8.2 wt.%of TiO2,13.2 wt.%of CaO, 8.3 wt.%of MgO,5.5 wt.%of Al2O3 and 1.0 wt.%of P2O5.The composition is comparable with the Fe-rich melts in the Skaergaard and Sept Iles intrusions.Paired non-reactive microstructures,granophyre pockets and ilmenite-rich intergrowths,are representative of Si-rich melt and Fe-Ti-rich melt,and are the direct evidence for the existence of an immiscible Fe-Ti-rich melt that formed from an evolved ferro-basaltic magma.
基金This work was financially supported by the National Key R&D Program of China(No.2016YFC0600109)the State Key Laboratory of Lithospheric Evolution,IGGCAS(No.SKL-Z201905)+1 种基金This work was also financially supported by the National Natural Science Foundation of China(No.41602099)the State Key Laboratory of Lithospheric Evolution,IGGCAS(No.SPECIAL201606).
文摘The North China Craton(NCC)is the best example of an Archean craton that has lost its stability in the Late Mesozoic.Although the cratonic destruction is generally considered to have occurred in the Eastern Block and reached a peak in the Early Cretaceous,the exact areal extent of cratonic destruction is debated,especially the southern and northern margin of the NCC.Here we report geochronology,geochemical and Hf isotopic data of the Late Mesozoic granitoids from Lushi polymetal mineralization area(LPMA)in the southern margin of NCC.These results provide new insights into the destruction in the southern margin of the NCC during the Late Mesozoic.Zircon U-Pb dating indicates that eight granitoids intruded in the Late Jurassic to Early Cretaceous(136.8–154.1 Ma),respectively.Geochemical signatures define these granitoids being A-type or I-type granite that formed in an extension setting.In addition,Hf isotopic compositions of zircons from these granitoids vary in a relatively large range,withεHf(t)values and TDM2 ages ranginge from-26.1 to+15.2 and 215 to 2849 Ma,respectively.The parental magmas were likely derived from diverse sources,including materials of the partial melting of ancient lower crust and mantle-derived mafic magmas in various proportions.Combining with previous studies on the contemporaneous magma-tectonic activities in circum of NCC,we suggest that the rim of NCC was already unstabilized from the Late Jurassic in the LPMA.The subduction of the Paleo-Pacific Plate was the main trigger to the destruction of the southern margin of NCC,which was responsible for the lithospheric extension and thinning,extensive magmatism and mineralization.
基金supported by the Central South University Postdoctoral Research Fund(No.22020084)。
文摘The Bipindi iron ore district is located in the central section of the Nyong Complex at the northwestern margin of the Congo Craton in Southwest Cameroon.This iron district contains numerous iron mineralization hosted by the Mewongo,Bibole,Kouambo,and Zambi banded iron formations(BIFs).These BIFs contain magnetite as the main iron ore mineral associated with pyrite,and gangue minerals are quartz with minor chlorite and amphibole.The origin of iron ore from these BIFs was investigated using a combination of in-situ magnetite and whole-rock chemistry.The studied BIF ore samples have a narrow range of TFe between 30.90 wt.%and 43.20 wt.%,indicating a low-grade ore.The geochemical signatures of magnetite such as low contents of base metals(e.g.,Cu,Co,V,and Zn)and low Co/Zn ratios<0.85 indicate a hydrothermal origin.Combined with the geochemical features of these BIFs,e.g.,high Fe/Ti and Fe/Al ratios(mean>600 and>75,respectively),we suggest that magnetite was derived from a mixture of seawater and~0.1%low-temperature hydrothermal fluids in an oxidizing environment.Collectively,low-temperature hydrothermal and later metamorphic fluids were necessary for the transformation of the protolith Nyong Complex BIFs to iron ore.
基金supported by the Fourth Petroleum Resource Evaluation Project of China (Grant No. 2013E050209)the National S&T Major Project of China (Grant No. 2012E330)
文摘The Lower Cretaceous Xiagou Formation contains the major source rocks for the crude oils discovered in the Qingxi Sag and the South Uplift in the Jiuquan Basin, northwestern China. The Xiagou Formation source rock was formed in a closed,anoxic, reducing, alkaline lacustrine environment with a high salinity. Its high content of brittle minerals is favorable for the fracturing of reservoirs in source rock formations in the Qingxi Sag. The Xiagou Formation contains a great number of fair to excellent source rocks, and their organic matter（OM） came chiefly from plankton/algae and high plants as well as possibly bacterial organisms. The Xiagou Formation source rocks mainly contain Type II OM and some Type III and Type I OM, with good oil-generating potential. The source rock maturity is mainly in the early-mature and mature stages, and its Rovalue corresponding to oil peak is about 0.8%, which is lower than classic oil peak Rovalue of 1.0%; therefore, a great deal of hydrocarbon was generated before the classic oil peak Ro= 1.0%. Mature source rock in the Xiagou Formation tends to be distributed in the older members and at a greater depth. There is a better exploration potential of tight oil in the deep Qingxi Sag.
