Thermal runaway has been a long-standing safety issue impeding the development of high-energy- density batteries. Physical safety designs such as employing circuit-breakers and fuses to batteries are limited by small ...Thermal runaway has been a long-standing safety issue impeding the development of high-energy- density batteries. Physical safety designs such as employing circuit-breakers and fuses to batteries are limited by small operating voltage windows and no resumption of original working condition when it is cooled down. Here we report a smart thermoresponsive polymer electrolyte that can be incorporated inside batteries to prevent thermal runaway via a fast and reversible sol-gel transition, and successfully combine this smart electrolyte with a rechargeable Zn/^-Mn02 battery system. At high temperature, bat- tery operation is inhibited as a result of the increased internal resistance caused by the gelation of liquid electrolyte. After cooling down, the electrolyte is spontaneously reversed to sol state and the electro- chemical performance of the battery is restored. More importantly, sol-gel transition enables the smart battery to experience different charge-discharge rates under various temperature levels, providing a smart and active strategy to achieve dynamic and reversible self-protection.展开更多
Poly(vinylidenefluoride-co-hexafluoropropylene)(PVDF-HFP)based gel polymer electrolytes are widely studied owing to their electrochemical stability and high dielectric constant.However,most gel polymer electrolytes sh...Poly(vinylidenefluoride-co-hexafluoropropylene)(PVDF-HFP)based gel polymer electrolytes are widely studied owing to their electrochemical stability and high dielectric constant.However,most gel polymer electrolytes show unsatisfied safety and interface compatibility due to excessive absorption of volatile and flammable liquid solvents.Herein,by using a safe solvent(N-methyl-2-pyrrolidone)with higher boiling(203℃)and flash points(95℃),we initiatively fabricate a flexible PVDF-HFP based gel polymer electrolyte.The obtained gel polymer electrolyte demonstrates a high ionic conductivity of 7.24×10^−4 S cm−1,an electrochemical window of 5.2 V,and a high lithium transference number of 0.57.As a result,the synthesized polymer electrolyte exhibits a capacity retention of 70%after 500 cycles at 0.5 C,and a discharge capacity of 86 mAh g−1 even at a high current rate of 10 C for LiFePO4 based Li metal batteries.Moreover,a stable Li plating/stripping for more than 500 h is achieved under 0.1 mAh at both room temperature and 70℃.Our results indicate that the PVDF-HFP polymer electrolyte is promising for manufacturing safe and high-performance Li metal polymer batteries.展开更多
Current lithium-ion batteries(LIBs)rely on organic liquid electrolytes that pose significant risks due to their flammability and toxicity.The potential for environmental pollution and explosions resulting from battery...Current lithium-ion batteries(LIBs)rely on organic liquid electrolytes that pose significant risks due to their flammability and toxicity.The potential for environmental pollution and explosions resulting from battery damage or fracture is a critical concern.Water-based(aqueous)electrolytes have been receiving attention as an alternative to organic electrolytes.However,a narrow electrochemicalstability window,water decomposition,and the consequent low battery operating voltage and energy density hinder the practical use of aqueous electrolytes.Therefore,developing novel aqueous electrolytes for sustainable,safe,high-performance LIBs remains challenging.This Review first commences by summarizing the roles and requirements of electrolytes–separators and then delineates the progression of aqueous electrolytes for LIBs,encompassing aqueous liquid and gel electrolyte development trends along with detailed principles of the electrolytes.These aqueous electrolytes are progressed based on strategies using superconcentrated salts,concentrated diluents,polymer additives,polymer networks,and artificial passivation layers,which are used for suppressing water decomposition and widening the electrochemical stability window of water of the electrolytes.In addition,this Review discusses potential strategies for the implementation of aqueous Li-metal batteries with improved electrolyte–electrode interfaces.A comprehensive understanding of each strategy in the aqueous system will assist in the design of an aqueous electrolyte and the development of sustainable and safe high-performance batteries.展开更多
Lithium-sulfur(Li-S)battery can satisfy the need of the future power battery market because of its high energy density,but the hidden dangers caused by lithium anode have seriously hindered their commercialization.Her...Lithium-sulfur(Li-S)battery can satisfy the need of the future power battery market because of its high energy density,but the hidden dangers caused by lithium anode have seriously hindered their commercialization.Herein,an innovative gel polymer electrolyte(GPE)composed of polyvinylidene fluoride(PVDF)and organo-polysulfide polymer(PSPEG)is proposed,which could be used in semisolid-state Li-S batteries for protection of Li anodes.Particularly,organo-polysulfide polymer could chemically/electrochemically generate both inorganic and organic components simultaneously in-situ once contacting fresh Li metal surface and/or during discharging processes.And these inorganic/organic components could participate in the formation of the SEI layer and finally constitute a stable and flexible hybrid SEI layer on the surface of Li metal anode.Moreover,the organic components were permselective to lithium ions against anions.Therefore,PVDF/PSPEG GPE ensures the ideal chemical and electrochemical properties for Li-S batteries.Our work demonstrates an effective solution to solve the problems about Li anodes and contributes to the development of the safe Li metal batteries.展开更多
基金supported by NSFC/RGC Joint Research Scheme under Project N_CityU123/15 and NSFC 5151101197a Grant from City University of Hong Kong (PJ7004645)sponsored by Science & Technology Department of Sichuan Province (2017JY0088)
文摘Thermal runaway has been a long-standing safety issue impeding the development of high-energy- density batteries. Physical safety designs such as employing circuit-breakers and fuses to batteries are limited by small operating voltage windows and no resumption of original working condition when it is cooled down. Here we report a smart thermoresponsive polymer electrolyte that can be incorporated inside batteries to prevent thermal runaway via a fast and reversible sol-gel transition, and successfully combine this smart electrolyte with a rechargeable Zn/^-Mn02 battery system. At high temperature, bat- tery operation is inhibited as a result of the increased internal resistance caused by the gelation of liquid electrolyte. After cooling down, the electrolyte is spontaneously reversed to sol state and the electro- chemical performance of the battery is restored. More importantly, sol-gel transition enables the smart battery to experience different charge-discharge rates under various temperature levels, providing a smart and active strategy to achieve dynamic and reversible self-protection.
基金supported by Special fund of key technology research and development projects(20180201097GX,20180201099GX,20180201096GX)Jilin province science and technology department.The R&D Program of power batteries with low temperature and high energy,Science and Technology Bureau of Changchun(19SS013)+4 种基金National Key R&D Program of China(2016YFB0100500)the National Natural Science Foundation of China(21905041)the Fundamental Research Funds for the Central Universities,Project funded by China Postdoctoral Science Foundation,and Natural Science Foundation of the Jilin Province Education department(JJKH20190265KJ)The Fundamental Research Funds for the Central Universities(2412019FZ015)Key Subject Construction of Physical Chemistry of Northeast Normal University.
文摘Poly(vinylidenefluoride-co-hexafluoropropylene)(PVDF-HFP)based gel polymer electrolytes are widely studied owing to their electrochemical stability and high dielectric constant.However,most gel polymer electrolytes show unsatisfied safety and interface compatibility due to excessive absorption of volatile and flammable liquid solvents.Herein,by using a safe solvent(N-methyl-2-pyrrolidone)with higher boiling(203℃)and flash points(95℃),we initiatively fabricate a flexible PVDF-HFP based gel polymer electrolyte.The obtained gel polymer electrolyte demonstrates a high ionic conductivity of 7.24×10^−4 S cm−1,an electrochemical window of 5.2 V,and a high lithium transference number of 0.57.As a result,the synthesized polymer electrolyte exhibits a capacity retention of 70%after 500 cycles at 0.5 C,and a discharge capacity of 86 mAh g−1 even at a high current rate of 10 C for LiFePO4 based Li metal batteries.Moreover,a stable Li plating/stripping for more than 500 h is achieved under 0.1 mAh at both room temperature and 70℃.Our results indicate that the PVDF-HFP polymer electrolyte is promising for manufacturing safe and high-performance Li metal polymer batteries.
基金the National Research Foundation(NRF)of Korea(No.2022R1A2B5B02002097),funded by the Korea government(MSIT).
文摘Current lithium-ion batteries(LIBs)rely on organic liquid electrolytes that pose significant risks due to their flammability and toxicity.The potential for environmental pollution and explosions resulting from battery damage or fracture is a critical concern.Water-based(aqueous)electrolytes have been receiving attention as an alternative to organic electrolytes.However,a narrow electrochemicalstability window,water decomposition,and the consequent low battery operating voltage and energy density hinder the practical use of aqueous electrolytes.Therefore,developing novel aqueous electrolytes for sustainable,safe,high-performance LIBs remains challenging.This Review first commences by summarizing the roles and requirements of electrolytes–separators and then delineates the progression of aqueous electrolytes for LIBs,encompassing aqueous liquid and gel electrolyte development trends along with detailed principles of the electrolytes.These aqueous electrolytes are progressed based on strategies using superconcentrated salts,concentrated diluents,polymer additives,polymer networks,and artificial passivation layers,which are used for suppressing water decomposition and widening the electrochemical stability window of water of the electrolytes.In addition,this Review discusses potential strategies for the implementation of aqueous Li-metal batteries with improved electrolyte–electrode interfaces.A comprehensive understanding of each strategy in the aqueous system will assist in the design of an aqueous electrolyte and the development of sustainable and safe high-performance batteries.
基金supported by the National Natural Science Foundation of China(Grant No.21805016 and Grant No.51572037)the Natural Science Foundation of Jiangsu Province of China(No.BK20180961)+3 种基金the Natural Science Foundation of the Jiangsu Higher Education Institutions of China(Grant No.18KJD530001 and Grant No.18KJB430004)the Key Research and Development Project of Jiangsu Province(Grant No.BE2017006-3)the Top-notch Academic Programs Project of Jiangsu Higher Education Institutions(TAPP)Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)。
文摘Lithium-sulfur(Li-S)battery can satisfy the need of the future power battery market because of its high energy density,but the hidden dangers caused by lithium anode have seriously hindered their commercialization.Herein,an innovative gel polymer electrolyte(GPE)composed of polyvinylidene fluoride(PVDF)and organo-polysulfide polymer(PSPEG)is proposed,which could be used in semisolid-state Li-S batteries for protection of Li anodes.Particularly,organo-polysulfide polymer could chemically/electrochemically generate both inorganic and organic components simultaneously in-situ once contacting fresh Li metal surface and/or during discharging processes.And these inorganic/organic components could participate in the formation of the SEI layer and finally constitute a stable and flexible hybrid SEI layer on the surface of Li metal anode.Moreover,the organic components were permselective to lithium ions against anions.Therefore,PVDF/PSPEG GPE ensures the ideal chemical and electrochemical properties for Li-S batteries.Our work demonstrates an effective solution to solve the problems about Li anodes and contributes to the development of the safe Li metal batteries.
