Fluorine-incorporated hydrogenated fullerene-like nanostructure amorphous carbon films(F-FLC)were synthesized by employing the direct current plasma enhanced chemical vapor deposition(dc-PECVD)technique using a mixtur...Fluorine-incorporated hydrogenated fullerene-like nanostructure amorphous carbon films(F-FLC)were synthesized by employing the direct current plasma enhanced chemical vapor deposition(dc-PECVD)technique using a mixture of methane(CH4),tetra-fluoromethane(CF4),and hydrogen(H2)as the working gases.The effect of the fluorine content on the bonding structure,surface roughness,hydrophobic,mechanical,and tribological properties of the films was systematically investigated using Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS),Raman analysis,atomic force microscope(AFM),contact angle goniometer,nano-indenter,and reciprocating ball-on-disc tester,respectively.The fluorine content in the films increased from 0 to 2.1 at.%as the CF4 gas flow ratio increased from 0 to 3 sccm,and incorporated fluorine atoms existed in the form of C-FX(X=1,2,3)bonds in the film.The fullerene nanostructure embedded in the hydrogenated amorphous carbon films was confirmed by Raman analysis.The water contact angle was significantly increased because of fluorine doping,which indicates that the hydrophobicity of the carbon films could be adjusted to some extent by the fluorine doping.The hardness and elastic modulus of the films remained relatively high(22 GPa)as the fluorine content increased.Furthermore,the friction coefficient of the carbon films was significantly reduced and the wear resistance was enhanced by fluorine doping.展开更多
Herein, a convenient method based on a fullerene/multiwalled carbon nanotube/Nafion modified glassy carbon electrode (fullerene/MWCNT/Naf/GCE) for the electrochemical determination of caffeine (CAF) is reported. Cycli...Herein, a convenient method based on a fullerene/multiwalled carbon nanotube/Nafion modified glassy carbon electrode (fullerene/MWCNT/Naf/GCE) for the electrochemical determination of caffeine (CAF) is reported. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to study ionic exchange properties and conductivity the proposed electrode using [Fe(CN)6]3-/4- redox couple. Caffeine gave an irreversible oxidation peak around +1.33 V (vs. Ag/AgCl reference electrode) in HClO4 (pH 1). The linear dependence of the peak current with the square root of the scan rate showed that the electron transfer process is controlled by diffusion. After optimization of key analytical parameters involved in differential pulse voltammetry (DPV), the oxidation peak current varied linearly with CAF concentration in the range of 10 to 1000 μM. A detection limit of 7.289 × 10-8 M (S/N = 3) was found. Kinetic and chronocoulometric studies were also performed to characterize the diffusion of CAF. The developed electrode exhibited good stability and was easily regenerated. The influence of some potential interfering compounds such as dopamine, uric acid, glucose and sulfite ions on the anodic peak current of CAF was also examined. The proposed method was successfully employed in the determination of CAF in some commercial drugs.展开更多
In the present work the synthesis of C60 produced in a conventional microwave oven from the decomposition of camphor resin is reported. The polycrystalline structure of the sample was determined by X-Ray Diffraction (...In the present work the synthesis of C60 produced in a conventional microwave oven from the decomposition of camphor resin is reported. The polycrystalline structure of the sample was determined by X-Ray Diffraction (XRD), the sample showed several phases, the main phase corresponds to fullerene C60 ordered in a Face-Centered Cubic structure (FCC), with two more structures: one orthorhombic system and the other the monoclinic system coexisting also with graphite 2H phase. It was observed in a Scanning Electron Microscopy (SEM), that the sample formed thin films of stacked carbon. Whereas in a High Resolution Transmission Electron Microscopy (HRTEM), measurements in Bright Field mode revealed that the main phase of the material is C60 ordered in FCC structure and the elemental composition and atomic bonding state can be determined by analyzing the energy with the electron microscope by Elesctron Energy- Loss Spectroscopy (EELS), technique allowed confirm all the phase C60 established with XRD observations.展开更多
Thin films of three types of fullerene derivatives were prepared through the electrospray deposition (ESD) method. The optimized conditions for the fabrication of the thin films were investigated for different types o...Thin films of three types of fullerene derivatives were prepared through the electrospray deposition (ESD) method. The optimized conditions for the fabrication of the thin films were investigated for different types of fullerene derivatives: [6,6]-phenyl-C61-butyric acid methyl ester, [6,6]-phenyl-C71-butyric acid methyl ester, and indene-C60-monoadduct. The spray diameter during the ESD process was observed as a function of the supply rate achieved by changing the applied voltage. In all cases, the spray diameter increased with increasing applied voltage, reaching the maximum diameter (Dmax) in the voltage range 4 to 6 kV. It was clear that Dmax was influenced by the dipole moments of the fullerene derivatives (as calculated by density functional theory methods). Scanning electron microscopy observation of the?fabricated thin films showed that imbricated structures were formed through the stacking of the fullerene-derivative sheets. Atomic force microscopy images revealed that the density of the imbricated structure was dependent on the spray diameter during the ESD process, and the root-mean-square roughness of the film surface decreased with increasing applied voltage. These findings suggest that the ESD method will be effective for the preparation of fullerene-derivative thin films for the production of organic devices.展开更多
The morphology of active layer in bulk heterojunction(BHJ) organic solar cells is decisive to the device performance. Previous works have shown that the solvent engineering is an effective method to optimize the morph...The morphology of active layer in bulk heterojunction(BHJ) organic solar cells is decisive to the device performance. Previous works have shown that the solvent engineering is an effective method to optimize the morphology of active layer. However, screening the proper solvent is a tedious task, and we know very little about how to select a proper solvent for a particular system, especially for polymer/nonfullerene blend systems. Here, we combined the spectroscopic analysis in various solvent mixtures during film-forming process to reveal the relationship among the cosolvent characteristics, film-forming kinetics and film morphology. In this article, P3 HT/O-IDTBR blend was selected as model system due to being facile synthesized under a large-scale. Chlorobenzene(CB) was selected as main solvent, and the cosolvents were grouped into three categories according to its boiling point(bp) compared to CB.The cosolvents with lower bp, like chloroform(CF), can facilitate a faster film-forming process, reducing the domain size but sacrificing the crystallinity of both components. For the cosolvents with higher bp,like o-dichlorobenzene(DCB) and 1,2,4-trichlorobenzene(TCB), the self-organization process of P3 HT and O-IDTBR is separated and its duration was extended, constructing highly crystalline nanointerpenetrating network. However, the cosolvents with very high bp, such as chlornaphthalene(CN),would residue in film and keep P3 HT and O-IDTBR self-organizing for longer time, leading to larger phase separation. This work systematically investigated the effect of cosolvent on the film-forming kinetics, and proposed a guideline of how to select a proper cosolvent according to the crystallinity and domain size of active layer.展开更多
基金the National Key Basic Research and Development(973)Program of China(Grant No.2013CB632300)the National Natural Science Foundation of China(Grant Nos.51275508 and 51205383)the Ministry of Science and Technology of China(Grant No.2010DFA63610)for financial support.
文摘Fluorine-incorporated hydrogenated fullerene-like nanostructure amorphous carbon films(F-FLC)were synthesized by employing the direct current plasma enhanced chemical vapor deposition(dc-PECVD)technique using a mixture of methane(CH4),tetra-fluoromethane(CF4),and hydrogen(H2)as the working gases.The effect of the fluorine content on the bonding structure,surface roughness,hydrophobic,mechanical,and tribological properties of the films was systematically investigated using Fourier transform infrared spectroscopy(FTIR),X-ray photoelectron spectroscopy(XPS),Raman analysis,atomic force microscope(AFM),contact angle goniometer,nano-indenter,and reciprocating ball-on-disc tester,respectively.The fluorine content in the films increased from 0 to 2.1 at.%as the CF4 gas flow ratio increased from 0 to 3 sccm,and incorporated fluorine atoms existed in the form of C-FX(X=1,2,3)bonds in the film.The fullerene nanostructure embedded in the hydrogenated amorphous carbon films was confirmed by Raman analysis.The water contact angle was significantly increased because of fluorine doping,which indicates that the hydrophobicity of the carbon films could be adjusted to some extent by the fluorine doping.The hardness and elastic modulus of the films remained relatively high(22 GPa)as the fluorine content increased.Furthermore,the friction coefficient of the carbon films was significantly reduced and the wear resistance was enhanced by fluorine doping.
文摘Herein, a convenient method based on a fullerene/multiwalled carbon nanotube/Nafion modified glassy carbon electrode (fullerene/MWCNT/Naf/GCE) for the electrochemical determination of caffeine (CAF) is reported. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were used to study ionic exchange properties and conductivity the proposed electrode using [Fe(CN)6]3-/4- redox couple. Caffeine gave an irreversible oxidation peak around +1.33 V (vs. Ag/AgCl reference electrode) in HClO4 (pH 1). The linear dependence of the peak current with the square root of the scan rate showed that the electron transfer process is controlled by diffusion. After optimization of key analytical parameters involved in differential pulse voltammetry (DPV), the oxidation peak current varied linearly with CAF concentration in the range of 10 to 1000 μM. A detection limit of 7.289 × 10-8 M (S/N = 3) was found. Kinetic and chronocoulometric studies were also performed to characterize the diffusion of CAF. The developed electrode exhibited good stability and was easily regenerated. The influence of some potential interfering compounds such as dopamine, uric acid, glucose and sulfite ions on the anodic peak current of CAF was also examined. The proposed method was successfully employed in the determination of CAF in some commercial drugs.
文摘In the present work the synthesis of C60 produced in a conventional microwave oven from the decomposition of camphor resin is reported. The polycrystalline structure of the sample was determined by X-Ray Diffraction (XRD), the sample showed several phases, the main phase corresponds to fullerene C60 ordered in a Face-Centered Cubic structure (FCC), with two more structures: one orthorhombic system and the other the monoclinic system coexisting also with graphite 2H phase. It was observed in a Scanning Electron Microscopy (SEM), that the sample formed thin films of stacked carbon. Whereas in a High Resolution Transmission Electron Microscopy (HRTEM), measurements in Bright Field mode revealed that the main phase of the material is C60 ordered in FCC structure and the elemental composition and atomic bonding state can be determined by analyzing the energy with the electron microscope by Elesctron Energy- Loss Spectroscopy (EELS), technique allowed confirm all the phase C60 established with XRD observations.
文摘Thin films of three types of fullerene derivatives were prepared through the electrospray deposition (ESD) method. The optimized conditions for the fabrication of the thin films were investigated for different types of fullerene derivatives: [6,6]-phenyl-C61-butyric acid methyl ester, [6,6]-phenyl-C71-butyric acid methyl ester, and indene-C60-monoadduct. The spray diameter during the ESD process was observed as a function of the supply rate achieved by changing the applied voltage. In all cases, the spray diameter increased with increasing applied voltage, reaching the maximum diameter (Dmax) in the voltage range 4 to 6 kV. It was clear that Dmax was influenced by the dipole moments of the fullerene derivatives (as calculated by density functional theory methods). Scanning electron microscopy observation of the?fabricated thin films showed that imbricated structures were formed through the stacking of the fullerene-derivative sheets. Atomic force microscopy images revealed that the density of the imbricated structure was dependent on the spray diameter during the ESD process, and the root-mean-square roughness of the film surface decreased with increasing applied voltage. These findings suggest that the ESD method will be effective for the preparation of fullerene-derivative thin films for the production of organic devices.
基金supported by the National Natural Science Foundation of China (51773203, 51903211)the Fundamental Research Funds for the Central Universities (D5000200273)。
文摘The morphology of active layer in bulk heterojunction(BHJ) organic solar cells is decisive to the device performance. Previous works have shown that the solvent engineering is an effective method to optimize the morphology of active layer. However, screening the proper solvent is a tedious task, and we know very little about how to select a proper solvent for a particular system, especially for polymer/nonfullerene blend systems. Here, we combined the spectroscopic analysis in various solvent mixtures during film-forming process to reveal the relationship among the cosolvent characteristics, film-forming kinetics and film morphology. In this article, P3 HT/O-IDTBR blend was selected as model system due to being facile synthesized under a large-scale. Chlorobenzene(CB) was selected as main solvent, and the cosolvents were grouped into three categories according to its boiling point(bp) compared to CB.The cosolvents with lower bp, like chloroform(CF), can facilitate a faster film-forming process, reducing the domain size but sacrificing the crystallinity of both components. For the cosolvents with higher bp,like o-dichlorobenzene(DCB) and 1,2,4-trichlorobenzene(TCB), the self-organization process of P3 HT and O-IDTBR is separated and its duration was extended, constructing highly crystalline nanointerpenetrating network. However, the cosolvents with very high bp, such as chlornaphthalene(CN),would residue in film and keep P3 HT and O-IDTBR self-organizing for longer time, leading to larger phase separation. This work systematically investigated the effect of cosolvent on the film-forming kinetics, and proposed a guideline of how to select a proper cosolvent according to the crystallinity and domain size of active layer.
