This work investigated the formation of carbonaceous and nitrogenous disinfection by-products （C-DBPs, N-DBPs） upon chlorination of water samples collected from a surface water and a ground water treatment plant （S...This work investigated the formation of carbonaceous and nitrogenous disinfection by-products （C-DBPs, N-DBPs） upon chlorination of water samples collected from a surface water and a ground water treatment plant （SWTP and GWTP） where the conventional treatment processes, i.e., coagulation, sedimentation, and filtration were employed. Twenty DBPs, including four trihalomethanes, nine haloacetic acids, seven N-DBPs （dichloroacetamide, trichloroacetamide, dichloroacetonitrile, trichloroacetonitrile, bromochloroace- tonitrile, dibromoacetonitrile and trichloronitromethane）, and eight volatile chlorinated compounds （dichloromethane （DCM）, 1,2-dichloroethane, tetrachloroethylene, chlorobenzene, 1,2-dichlorobenzene, 1,4-dichlorobenzene, 1,2,3-trichlorobenzene and 1,2,4- trichlorobenzene） were detected in the two WTPs. The concentrations of these contaminants were all below their corresponding maximum contamination levels （MCLs） regulated by the Standards for Drinking Water Quality of China （GB5749-2006） except for DCM （17.1 ~tg/L detected vs. 20 μg/L MCL）. The SWTP had much higher concentrations of DBPs detected in the treated water as well as the DBP formation potentials tested in the filtered water than the GWTP, probably because more precursors （e.g., dissolved organic carbon, dissolved organic nitrogen） were present in the water source of the SWTE展开更多
Objective To introduce a new sequential chlorination disinfection process in which short-term free chlorine and chloramine are sequentially added. Methods Pilot tests of this sequential chlorination were carried out i...Objective To introduce a new sequential chlorination disinfection process in which short-term free chlorine and chloramine are sequentially added. Methods Pilot tests of this sequential chlorination were carried out in a drinking water plant. Results The sequential chlorination disinfection process had the same or better efficiency on microbe （including virus） inactivation compared with the free chlorine disinfection process. There seemed to be some synergetic disinfection effect between free chlorine and monochloramine because they attacked different targets. The sequential chlorination disinfection process resulted in 35.7%-77.0% TTHM formation and 36.6%-54.8% THAA5 formation less than the free chlorination process. The poorer the water quality was, the more advantage the sequential chlorination disinfection had over the free chlorination. Conclusion This process takes advantages of free chlorine＇s quick inactivation of microorganisms and chloramine＇s low disinfection by-product （DBP） yield and long-term residual effect, allowing simultaneous control of microbes and DBPs in an effective and economic way.展开更多
基金supported by the National Major Science and Technology Project on Water Pollution Control and Management of China (No. 2009ZX07424-003)the National Natural Science Foundation of China (No.51108327)the State Key Laboratory of Pollution Control and Resource Reuse Foundation (No. PCRRY11015)
文摘This work investigated the formation of carbonaceous and nitrogenous disinfection by-products （C-DBPs, N-DBPs） upon chlorination of water samples collected from a surface water and a ground water treatment plant （SWTP and GWTP） where the conventional treatment processes, i.e., coagulation, sedimentation, and filtration were employed. Twenty DBPs, including four trihalomethanes, nine haloacetic acids, seven N-DBPs （dichloroacetamide, trichloroacetamide, dichloroacetonitrile, trichloroacetonitrile, bromochloroace- tonitrile, dibromoacetonitrile and trichloronitromethane）, and eight volatile chlorinated compounds （dichloromethane （DCM）, 1,2-dichloroethane, tetrachloroethylene, chlorobenzene, 1,2-dichlorobenzene, 1,4-dichlorobenzene, 1,2,3-trichlorobenzene and 1,2,4- trichlorobenzene） were detected in the two WTPs. The concentrations of these contaminants were all below their corresponding maximum contamination levels （MCLs） regulated by the Standards for Drinking Water Quality of China （GB5749-2006） except for DCM （17.1 ~tg/L detected vs. 20 μg/L MCL）. The SWTP had much higher concentrations of DBPs detected in the treated water as well as the DBP formation potentials tested in the filtered water than the GWTP, probably because more precursors （e.g., dissolved organic carbon, dissolved organic nitrogen） were present in the water source of the SWTE
基金This work was sponsored by National Natural Science Fundation Committee (No. 50238020).
文摘Objective To introduce a new sequential chlorination disinfection process in which short-term free chlorine and chloramine are sequentially added. Methods Pilot tests of this sequential chlorination were carried out in a drinking water plant. Results The sequential chlorination disinfection process had the same or better efficiency on microbe （including virus） inactivation compared with the free chlorine disinfection process. There seemed to be some synergetic disinfection effect between free chlorine and monochloramine because they attacked different targets. The sequential chlorination disinfection process resulted in 35.7%-77.0% TTHM formation and 36.6%-54.8% THAA5 formation less than the free chlorination process. The poorer the water quality was, the more advantage the sequential chlorination disinfection had over the free chlorination. Conclusion This process takes advantages of free chlorine＇s quick inactivation of microorganisms and chloramine＇s low disinfection by-product （DBP） yield and long-term residual effect, allowing simultaneous control of microbes and DBPs in an effective and economic way.
