After Ms=6.5 Yao＇an earthquake on January 15, 2000, a large amount of aftershock waveforms were recorded by the Near Source Digital Seismic Network （NSSN） installed by Earthquake Administration of Yunnan Province i...After Ms=6.5 Yao＇an earthquake on January 15, 2000, a large amount of aftershock waveforms were recorded by the Near Source Digital Seismic Network （NSSN） installed by Earthquake Administration of Yunnan Province in the aftershock region. It provides profuse data to systematically analyze the features of Yao＇an earthquake. The crustal anisotropy is realized by shear wave splitting propagating in the upper crust. Based on the accurate aftershock relocations, the shear wave splitting parameters are determined with the cross-correlation method, and the results of different stations and regions are discussed in this paper. These conclusions are obtained as follows： firstly, the average fast directions of aftershock region are controlled by the regional stress field and parallel to the maximum horizontal compressive stress direction; secondly, the average fast directions of disparate stations and regions are different and vary with the structural settings and regional stress fields; finally, delay time value is affected by all sorts of factors, which is affinitive with the shear wave propagating medium, especially.展开更多
Data from the CASN(Capital Area Seismograph Network),NSNC(National Seismograph Network of China),and IRIS(Incorporated Research Institutions for Seismology) are compared with data from a temporary North China Seismic ...Data from the CASN(Capital Area Seismograph Network),NSNC(National Seismograph Network of China),and IRIS(Incorporated Research Institutions for Seismology) are compared with data from a temporary North China Seismic Array to obtain the background orientation of the horizontal crustal principal compressive stress at NE 95.1°±15.4° in North China.Data are corrected for disturbances of faults and irregular tectonics,and are used to constrain the fast SKS polarization at NE 110.2°±15.8° in North China.Individual station analyses suggests that there is consistently more than 10° difference between the polarizations of fast shear-wave in the crust and those of fast SKS phases.Azimuthally anisotropic phase velocities of Rayleigh waves at different periods also indicate an orientation change for fast velocity with depth.It suggests the crust-mantle coupling in North China follows neither the simple decoupling model nor the strong coupling model.Instead,it is possibly some inhomogeneous combination of two models or some gradual-change model of physical characteristics.This study shows that anisotropy in the crust and mantle could be multiply characterized more correctly and crust-mantle coupling could be analyzed further,if increasing near-field shear-wave splitting data that indicate crustal anisotropy,combined with the azimuthal anisotropy of Rayleigh waves,besides the result of SKS splitting travelling through lithosphere and surface GPS measurements.展开更多
The rocks in the crust are pervaded by stress-aligned fluid-saturated microcracks, and the complex fault tectonics and stress control the configuration of the microcracks, however shear-wave splitting could indicate t...The rocks in the crust are pervaded by stress-aligned fluid-saturated microcracks, and the complex fault tectonics and stress control the configuration of the microcracks, however shear-wave splitting could indicate this kind of characteristics. In this paper, Capital Area Seismograph Network (CASN), the widest scope and highest density of regional seismograph network presently in China, is adopted to deduce the principal compressive stress field distribution pattern from polarizations of fast shear- waves, based on shear-wave splitting analysis. The principal compressive stress in capital area of China is at NE85.7°± 41.0° in this study. Compared with the results of principal compressive stress field in North China obtained from other methods, the results in this study are reliable in the principal com- pressive stress field distribution in capital area. The results show that it is an effective way, although it is the first time to directly obtain crustal stress field from seismic anisotropy. It is effectively applied to the zones with dense seismograph stations.展开更多
We analyzed 360 permanent and campaign GPS data from 1999 to 2017 in the southern Sichuan-Yunan block, and obtained crustal horizontal deformation in this region.Then, we derived the strain rate using a multi-scale sp...We analyzed 360 permanent and campaign GPS data from 1999 to 2017 in the southern Sichuan-Yunan block, and obtained crustal horizontal deformation in this region.Then, we derived the strain rate using a multi-scale spherical wavelet method.Results reveal a complex pattern of tectonic movement in the southern Sichuan-Yunnan block.Compared to the stable Eurasian plate, the maximum rate of the horizontal deformation in the southern Sichuan-Yunnan block is approximately 22 mm/a.The Xiaojiang fault shows a significantly lower deformation—a left-lateral strike-slip movement of 9.5 mm/a.The Honghe fault clearly shows a complex segmental deformation from the north to south.The northern Honghe fault shows 4.3 mm/a right strike-slip with 6.7 mm/a extension; the southern Honghe fault shows 1.9 mm/a right strike-slip with 1.9 mm/a extension; the junction zone in the Honghe and Lijiang–Xiaojinhe faults shows an obvious clockwise-rotation deformation.The strain calculation results reveal that the maximum shear-strain rate in this region reaches 70 nstrain/a, concentrated around the Xiaojiang fault and at the junction of the Honghe and Lijiang–Xiaojinhe faults.We note that most of the earthquakes with magnitudes of 4 and above that occurred in this region were within the high shear strain-rate zones and the strain rate gradient boundary zone, which indicates that the magnitude of strain accumulation is closely related to the seismic activities.Comparison of the fast shear-wave polarization direction of the upper-crust with the upper-mantle anisotropy and the direction of the surface principal compressive strain rate obtained from the inversion of the GPS data reveals that the direction of the surface principal compressive strain is basically consistent with the fast shear-wave polarization direction of the upper crust anisotropy, but different from the polarization direction of the upper mantle.Our results support the hypothesis that the principal elements of the deformation mechanism in the southern Sichuan-Yunnan block 展开更多
When propagating through anisotropic rocks in the crust, shear-waves split into faster and slower components with almost orthogonal polarizations. For nearly vertical propagation the polarization of fast shear- wave ...When propagating through anisotropic rocks in the crust, shear-waves split into faster and slower components with almost orthogonal polarizations. For nearly vertical propagation the polarization of fast shear- wave （PFS） is parallel to both the strike of the cracks and the direction of maximum horizontal stress, therefore it is possible to use PFS to study stress in the crust. This study discusses several examples in which PFS is applied to deduce the compressive stress in North China, Longmenshan fault zone of east edge of Tibetan plateau and Yunnan zone of southeast edge of Tibetan plateau, also discusses temporal variations of PFS orientations of 1999 Xiuyan earthquake sequences of northeastern China. The results are consistent to those of other independent traditional stress measurements. There is a bridge between crustal PFS and the crustal principal compressive stress although there are many unclear disturbance sources. This study suggests the PFS results could be used to deduce regional and in situ principal compressive stress in the crust only if there are enough seismic stations and enough data. At least, PFS is a useful choice in the zone where there are a large number of dense seismic stations.展开更多
基金National Program on Key Basic Projects (2004CB418406) and Program for the tenth Five-year Plan of China (2004BA601B01-04-03).
文摘After Ms=6.5 Yao＇an earthquake on January 15, 2000, a large amount of aftershock waveforms were recorded by the Near Source Digital Seismic Network （NSSN） installed by Earthquake Administration of Yunnan Province in the aftershock region. It provides profuse data to systematically analyze the features of Yao＇an earthquake. The crustal anisotropy is realized by shear wave splitting propagating in the upper crust. Based on the accurate aftershock relocations, the shear wave splitting parameters are determined with the cross-correlation method, and the results of different stations and regions are discussed in this paper. These conclusions are obtained as follows： firstly, the average fast directions of aftershock region are controlled by the regional stress field and parallel to the maximum horizontal compressive stress direction; secondly, the average fast directions of disparate stations and regions are different and vary with the structural settings and regional stress fields; finally, delay time value is affected by all sorts of factors, which is affinitive with the shear wave propagating medium, especially.
基金supported by the National Natural Science Foundation of China (40674021)partly by IES project of Institute of Earthquake Science,China Earthquake Administration (2007-13)
文摘Data from the CASN(Capital Area Seismograph Network),NSNC(National Seismograph Network of China),and IRIS(Incorporated Research Institutions for Seismology) are compared with data from a temporary North China Seismic Array to obtain the background orientation of the horizontal crustal principal compressive stress at NE 95.1°±15.4° in North China.Data are corrected for disturbances of faults and irregular tectonics,and are used to constrain the fast SKS polarization at NE 110.2°±15.8° in North China.Individual station analyses suggests that there is consistently more than 10° difference between the polarizations of fast shear-wave in the crust and those of fast SKS phases.Azimuthally anisotropic phase velocities of Rayleigh waves at different periods also indicate an orientation change for fast velocity with depth.It suggests the crust-mantle coupling in North China follows neither the simple decoupling model nor the strong coupling model.Instead,it is possibly some inhomogeneous combination of two models or some gradual-change model of physical characteristics.This study shows that anisotropy in the crust and mantle could be multiply characterized more correctly and crust-mantle coupling could be analyzed further,if increasing near-field shear-wave splitting data that indicate crustal anisotropy,combined with the azimuthal anisotropy of Rayleigh waves,besides the result of SKS splitting travelling through lithosphere and surface GPS measurements.
基金the National Natural Science Foundation of China (Grant No. 40674021)IES-CEA Project (Grant No. 2007-13)
文摘The rocks in the crust are pervaded by stress-aligned fluid-saturated microcracks, and the complex fault tectonics and stress control the configuration of the microcracks, however shear-wave splitting could indicate this kind of characteristics. In this paper, Capital Area Seismograph Network (CASN), the widest scope and highest density of regional seismograph network presently in China, is adopted to deduce the principal compressive stress field distribution pattern from polarizations of fast shear- waves, based on shear-wave splitting analysis. The principal compressive stress in capital area of China is at NE85.7°± 41.0° in this study. Compared with the results of principal compressive stress field in North China obtained from other methods, the results in this study are reliable in the principal com- pressive stress field distribution in capital area. The results show that it is an effective way, although it is the first time to directly obtain crustal stress field from seismic anisotropy. It is effectively applied to the zones with dense seismograph stations.
基金supported by the National Natural Science Foundation of China (Project 41730212)the Basic Research Project of the Institute of Earthquake Forecasting, China Earthquake Administration (Grant No.2017IES0102, 2016IES0201)
文摘We analyzed 360 permanent and campaign GPS data from 1999 to 2017 in the southern Sichuan-Yunan block, and obtained crustal horizontal deformation in this region.Then, we derived the strain rate using a multi-scale spherical wavelet method.Results reveal a complex pattern of tectonic movement in the southern Sichuan-Yunnan block.Compared to the stable Eurasian plate, the maximum rate of the horizontal deformation in the southern Sichuan-Yunnan block is approximately 22 mm/a.The Xiaojiang fault shows a significantly lower deformation—a left-lateral strike-slip movement of 9.5 mm/a.The Honghe fault clearly shows a complex segmental deformation from the north to south.The northern Honghe fault shows 4.3 mm/a right strike-slip with 6.7 mm/a extension; the southern Honghe fault shows 1.9 mm/a right strike-slip with 1.9 mm/a extension; the junction zone in the Honghe and Lijiang–Xiaojinhe faults shows an obvious clockwise-rotation deformation.The strain calculation results reveal that the maximum shear-strain rate in this region reaches 70 nstrain/a, concentrated around the Xiaojiang fault and at the junction of the Honghe and Lijiang–Xiaojinhe faults.We note that most of the earthquakes with magnitudes of 4 and above that occurred in this region were within the high shear strain-rate zones and the strain rate gradient boundary zone, which indicates that the magnitude of strain accumulation is closely related to the seismic activities.Comparison of the fast shear-wave polarization direction of the upper-crust with the upper-mantle anisotropy and the direction of the surface principal compressive strain rate obtained from the inversion of the GPS data reveals that the direction of the surface principal compressive strain is basically consistent with the fast shear-wave polarization direction of the upper crust anisotropy, but different from the polarization direction of the upper mantle.Our results support the hypothesis that the principal elements of the deformation mechanism in the southern Sichuan-Yunnan block
基金supported by International Science and Technology Cooperation Program of China(2010DFB20190)National Natural Science Foundation of China(41040034 and 41174042)the support by basic research project of Institute of Earthquake Science,China Earthquake Administration(2009IES0211)
文摘When propagating through anisotropic rocks in the crust, shear-waves split into faster and slower components with almost orthogonal polarizations. For nearly vertical propagation the polarization of fast shear- wave （PFS） is parallel to both the strike of the cracks and the direction of maximum horizontal stress, therefore it is possible to use PFS to study stress in the crust. This study discusses several examples in which PFS is applied to deduce the compressive stress in North China, Longmenshan fault zone of east edge of Tibetan plateau and Yunnan zone of southeast edge of Tibetan plateau, also discusses temporal variations of PFS orientations of 1999 Xiuyan earthquake sequences of northeastern China. The results are consistent to those of other independent traditional stress measurements. There is a bridge between crustal PFS and the crustal principal compressive stress although there are many unclear disturbance sources. This study suggests the PFS results could be used to deduce regional and in situ principal compressive stress in the crust only if there are enough seismic stations and enough data. At least, PFS is a useful choice in the zone where there are a large number of dense seismic stations.
