Based on the shear wave splitting analysis of the seismic recordings at 17 temporary stations and three permanent stations, we measured the shear wave splitting parameters(i.e., the polarization direction of fast shea...Based on the shear wave splitting analysis of the seismic recordings at 17 temporary stations and three permanent stations, we measured the shear wave splitting parameters(i.e., the polarization direction of fast shear wave and the time delay of slow wave) to perform a systematic analysis of the crustal seismic anisotropy around the Longmenshan fault in the 2013 M7.0 Lushan earthquake region. We observed apparent spatio-temporal characteristics in the shear wave splitting parameters. The spatial distribution of fast polarization directions showed a clear partitioning in the characteristics from northwest to southeast in the focal region,which changed from NW-SE to NE-SW. In the northwest of the focal region, the fast polarization direction was oriented to NW-SE, which was parallel to the maximum horizontal compressive stress direction. However, the NE-SW fast polarization direction in the southeast of the focal region was parallel to the Longmenshan fault strike. For station BAX on the Central fault in the middle of the focal region, the distribution of fast polarization directions showed a bimodal pattern, with one dominant in the NE-SW direction and the other in the NW-SE direction. With regard to the temporal variation, the time delays were large in the initial stage after the mainshock but then gradually decreased over time and tended to be stable in the later period. This indicated that stress in the focal region increased to a maximum when the main shock occurred, with the stress release caused by the mainshock and aftershock activity, and the stress gradually decreased after a period of time. The scatter of fast polarization directions was large after the main shock, but over time the scatter gradually decreased, indicating that the Lushan earthquake caused a large perturbation in the local stress field. As the stress gradually decreased and was adjusted by the aftershock activity, the perturbation gradually weakened.展开更多
Based on the polarization analysis of teleseismic SKS waveform data recorded at 94 broadband seis-mic stations in Sichuan and adjacent regions, the SKS fast-wave direction and the delay time between the fast and slow ...Based on the polarization analysis of teleseismic SKS waveform data recorded at 94 broadband seis-mic stations in Sichuan and adjacent regions, the SKS fast-wave direction and the delay time between the fast and slow shear waves were determined at each station using the grid searching method of minimum transverse energy and the stacking analysis method, and the image of upper mantle anisot-ropy was acquired. The fast-wave polarization directions are mainly NW-SE in the study area, NWW-SEE to its northeast and NS to its west. The delay time falls into the interval [0.47 s, 1.68 s]. The spatial variation of the fast-wave directions is similar to the variation of GPS velocity directions. The anisotropic image indicates that the regional tectonic stress field has resulted in deformation and flow of upper mantle material, and made the alignment of upper mantle peridotite lattice parallel to the di-rection of material deformation. The crust-upper mantle deformation in Sichuan and adjacent regions accords with the mode of vertically coherent deformation. In the eastern Tibetan Plateau, the crustal material was extruded to east or southeast due to SE traction force of the upper mantle material. The extrusion might be obstructed by a rigid block under the Sichuan Basin and the crust has been de-formed. After a long-term accumulation of tectonic strain energy, the accumulative energy suddenly released in Yingxiu town of the Longmenshan region, and Wenchuan MS8.0 earthquake occurred.展开更多
Using seismic data of the aftershocks sequence of the April 20, 2013 Lushan earthquake recorded by seismic temporary and permanent stations in the source region, with the visual inspection of particle motion diagrams,...Using seismic data of the aftershocks sequence of the April 20, 2013 Lushan earthquake recorded by seismic temporary and permanent stations in the source region, with the visual inspection of particle motion diagrams, this paper preliminarily contains the polarization directions of fast shear wave and the time-delays of split shear waves at every station, and analyzes the crustal anisotropic characteristics in the source region. In the study area, the polarization direc- tions at stations BAX, TQU, L 132, L 133, L 134, and L 135 are northeast, which is consistent with the strike of Dachuan- Shuangshi fault. There are two polarization directions at MDS and L131, which are northeast and southeast. The scatter of polarization directions suggests the complex stress field around these two stations where two faults intersect. For the normalized time-delays at every station, the range is 1.02-8.64 ms/km. The largest time-delay is from L134 which is closest to the mainshock, and the smallest one is from L133. The variations in time-delays show the decreasing at stations BAX, L134, and L135 because of the stress-relaxation after earthquake.展开更多
基金supported by the National Natural Science Foundation of China (Nos. 41774061 and 41474088)the Special Fund of the Institute of Geophysics,China Earthquake Administration (No. DQJB17B10)
文摘Based on the shear wave splitting analysis of the seismic recordings at 17 temporary stations and three permanent stations, we measured the shear wave splitting parameters(i.e., the polarization direction of fast shear wave and the time delay of slow wave) to perform a systematic analysis of the crustal seismic anisotropy around the Longmenshan fault in the 2013 M7.0 Lushan earthquake region. We observed apparent spatio-temporal characteristics in the shear wave splitting parameters. The spatial distribution of fast polarization directions showed a clear partitioning in the characteristics from northwest to southeast in the focal region,which changed from NW-SE to NE-SW. In the northwest of the focal region, the fast polarization direction was oriented to NW-SE, which was parallel to the maximum horizontal compressive stress direction. However, the NE-SW fast polarization direction in the southeast of the focal region was parallel to the Longmenshan fault strike. For station BAX on the Central fault in the middle of the focal region, the distribution of fast polarization directions showed a bimodal pattern, with one dominant in the NE-SW direction and the other in the NW-SE direction. With regard to the temporal variation, the time delays were large in the initial stage after the mainshock but then gradually decreased over time and tended to be stable in the later period. This indicated that stress in the focal region increased to a maximum when the main shock occurred, with the stress release caused by the mainshock and aftershock activity, and the stress gradually decreased after a period of time. The scatter of fast polarization directions was large after the main shock, but over time the scatter gradually decreased, indicating that the Lushan earthquake caused a large perturbation in the local stress field. As the stress gradually decreased and was adjusted by the aftershock activity, the perturbation gradually weakened.
基金the National Natural Science Foundation of China (Grant Nos. 40334041 and 40774037)the Special Project for the Fundamental R & D of Institute of Geophysics, China Earthquake Administration (Grant No. DQJB06B06)the Special Program of the Ministry of Science and Technology of China (Grant No. 2006FY110100)
文摘Based on the polarization analysis of teleseismic SKS waveform data recorded at 94 broadband seis-mic stations in Sichuan and adjacent regions, the SKS fast-wave direction and the delay time between the fast and slow shear waves were determined at each station using the grid searching method of minimum transverse energy and the stacking analysis method, and the image of upper mantle anisot-ropy was acquired. The fast-wave polarization directions are mainly NW-SE in the study area, NWW-SEE to its northeast and NS to its west. The delay time falls into the interval [0.47 s, 1.68 s]. The spatial variation of the fast-wave directions is similar to the variation of GPS velocity directions. The anisotropic image indicates that the regional tectonic stress field has resulted in deformation and flow of upper mantle material, and made the alignment of upper mantle peridotite lattice parallel to the di-rection of material deformation. The crust-upper mantle deformation in Sichuan and adjacent regions accords with the mode of vertically coherent deformation. In the eastern Tibetan Plateau, the crustal material was extruded to east or southeast due to SE traction force of the upper mantle material. The extrusion might be obstructed by a rigid block under the Sichuan Basin and the crust has been de-formed. After a long-term accumulation of tectonic strain energy, the accumulative energy suddenly released in Yingxiu town of the Longmenshan region, and Wenchuan MS8.0 earthquake occurred.
基金supported by Research Project in Earthquake Science(Nos.201308018 and No.201108002) National Natural Science Foundation of China(No.40904012)
文摘Using seismic data of the aftershocks sequence of the April 20, 2013 Lushan earthquake recorded by seismic temporary and permanent stations in the source region, with the visual inspection of particle motion diagrams, this paper preliminarily contains the polarization directions of fast shear wave and the time-delays of split shear waves at every station, and analyzes the crustal anisotropic characteristics in the source region. In the study area, the polarization direc- tions at stations BAX, TQU, L 132, L 133, L 134, and L 135 are northeast, which is consistent with the strike of Dachuan- Shuangshi fault. There are two polarization directions at MDS and L131, which are northeast and southeast. The scatter of polarization directions suggests the complex stress field around these two stations where two faults intersect. For the normalized time-delays at every station, the range is 1.02-8.64 ms/km. The largest time-delay is from L134 which is closest to the mainshock, and the smallest one is from L133. The variations in time-delays show the decreasing at stations BAX, L134, and L135 because of the stress-relaxation after earthquake.
