The mirror extending approach proposed by Zhao and Huang in EMD method is improved in this paper. Mirror extending manner of data is kept unchanged, but the approach for determining envelopes is changed. When the end ...The mirror extending approach proposed by Zhao and Huang in EMD method is improved in this paper. Mirror extending manner of data is kept unchanged, but the approach for determining envelopes is changed. When the end of data is obviously not extremum, the envelope is determined by the first inner extremum and the image value in the mirror, ignoring the value on the end. This improvement eliminates the frequency compression near the end and decreases the error. Meanwhile, tridiagonal equations are used and the calculation speed is much increased. The temporal process curve is more important in reflecting the real physical process and comparable with other phenomena. Frequency mixing in IMFs makes it impossible. A high frequency reconstruction (HFR) approach is proposed to eliminate common frequency mixing and reconstruct an IMF with all high frequency portions. By this approach, the IMFs without frequency mixing are obtained to express significative processes. The high frequency information restored in high frequency IMF can be extracted by general spectrum method. After obtaining IMFs by EMD method, some of the theoretical and technological issues still exist when using the IMFs. The consistency of IMFs with real physical process is discussed in detail. By virtue of the approach proposed in this paper, the EMD method can be widely used in various fields.展开更多
无线通信信道的时变性,使得纠错编码必须具备码率自适应的功能。原模图低密度奇偶校验码(low density parity check code,LDPC)可通过删余和扩展实现码率自适应,并能解决传统LDPC码编码复杂度高的难题。将具有原模图结构的AR4JA码(accum...无线通信信道的时变性,使得纠错编码必须具备码率自适应的功能。原模图低密度奇偶校验码(low density parity check code,LDPC)可通过删余和扩展实现码率自适应,并能解决传统LDPC码编码复杂度高的难题。将具有原模图结构的AR4JA码(accumulate repeat-4 jagged-accumulate code)作为母码,提出"逐节点删余"算法,实现AR4JA码率从0.5～0.8的变化,利用矩阵扩展实现码率从0.5～0.25的降低。在加性高斯白噪声信道(additive white Gaussian noise,AWGN)下的仿真结果表明,在BER为10-6数量级处,结合删余和扩展方法构造的码率自适应AR4JA码并未出现错误地板。展开更多
A self-made single-roll stirring (SRS) machine was used to manufacturesemisolid A2017 alloy, the mechanism of A2017 alloy formation was investigated. It was shown thatA2017 dendrites growing on the rough roll surface ...A self-made single-roll stirring (SRS) machine was used to manufacturesemisolid A2017 alloy, the mechanism of A2017 alloy formation was investigated. It was shown thatA2017 dendrites growing on the rough roll surface are crashed into fragments by the roll, which moveand grow freely then contribute the formation of finer spherical microstruc-ture. When casting at710-750℃, fine and homogeneous spherical or elliptical grains of A2017 alloy were obtained.Extending forming mould has been designed and was installed at the exit of roll-shoe gap. A2017alloy was formed by extending continuously at the semisolid state on SRS machine. Throughcontrolling pouring temperature, semisolid forming and extending extrusion was combined organically.A2017 product with fine surface and rectangular transection of 14 mm x 25 mm was obtained. Bycontrast to the national standard, the fracture strength and elongation of A2017 products producedfrom extending semisolid extrusion have been improved with an increase of 100 MPa and 29%,respectively.展开更多
The northwest trending tectonic belt in the middle part of the Mesozoic intraplate Yanshan Orogenic Belt, northeast Hebei Province, is composed of thrusts, extensional faults, strike-slip faults and syntectonic sedime...The northwest trending tectonic belt in the middle part of the Mesozoic intraplate Yanshan Orogenic Belt, northeast Hebei Province, is composed of thrusts, extensional faults, strike-slip faults and syntectonic sedimentations as well. The northeastward basement-involved major thrusting deformation occurred between 174Ma and 168MaBP and was followed by an intrusion of the granitic plutonic rocks. As a part of the post-thrusting extensional deformations a northwest extending volcano-sedimentation system of Late Jurassic and Early Cretaceous formed in the southwest side of the belt. These volcano-sedimentary sequences are divided into Tuchengzi Formation, Zhangjiakou Formation, Yixian Formation and Jiufotang Formation re- spectively. They are characterized by southeastward migration as a result of the increasing down-dip slip displacement along the major extensional fault toward the southeast of the belt. The provenance area of the Jiufotang Formation north to it experienced southwestward thrusting during and after its later sedimentation. The thrusting in this stage resulted in the formation of an asymmetric footwall syncline with vergence to SW in the Jiufotang Formation in the NE side of the basin. Finally a dextral strike-slip deformation occurred along the NW tectonic belt. The striking tectono-geomorphological features and present seismic activities along this belt indicate that it has been being active since Cenozoic era and is still in the active state at present. This northwest extending tectonic belt was following the same direction and location as the existing fault systems within the basement as revealed by former geological and geophysical studies. So it is reasonable to infer the Mesozoic deformation along this belt to be a result of reactivation of the basement structures in a favorable tectonic stress field. The reactivation of basement struc- tures might be taken as one of the mechanisms of intraplate deformation and orogeny.展开更多
There exists a large class of nonlinear systems with uncertainties, such as hydrau- lic turbine governors, whose robust control problem is hard to solve by means of the existing robust control approaches. For this cla...There exists a large class of nonlinear systems with uncertainties, such as hydrau- lic turbine governors, whose robust control problem is hard to solve by means of the existing robust control approaches. For this class of systems, this work pre- sents a dynamic extending H∞ controller via both differential geometry and H∞ the- ory. Furthermore, based on differential game theory, it has been verified that the proposed control strategy has robustness in the sense that the disturbance can be attenuated effectively because the L2-gain from the disturbance input to the regu- lation output signal could be reduced to any given level. Thirdly, a robust control strategy for hydraulic turbine governor is designed according to the proposed ex- tending H∞ control method, and has been developed into a real control equipment. Finally the field experiments are carried out which show clearly that the developed control equipment can enhance transient stability of power systems more effec- tively than the conventional controller.展开更多
Casing treatment is one possible way of regaining axial compressor operating range. However, most of casing treatments extend the operating range with the cost of efficiency penalty. A new form of multiple cylindrical...Casing treatment is one possible way of regaining axial compressor operating range. However, most of casing treatments extend the operating range with the cost of efficiency penalty. A new form of multiple cylindrical holes casing treatment(MHCT) with pre-swirl blowing for the NASA Rotor-37 has been designed based on profound understanding of the stall inception. Unsteady numerical simulations have been performed for Rotor-37 with and without MHCT. Parametric studies of the total extraction holes area and their axial locations show that the compressor performance deteriorates as the area ratio increases but the stall margin is extended and there is an optimum extraction holes axial location for stall margin extending. The better configuration of MHCT could extend the stall margin by 6.2% with only 0.23% peak efficiency reduction. Detailed analysis of the physical mechanism behind the stall margin improvement shows that the casing treatment could eliminate the passage blockage by suppressing breakup of tip leakage vortex and decrease the blade load in tip region, which both contribute to improve stall margin of transonic axial compressors.展开更多
文摘The mirror extending approach proposed by Zhao and Huang in EMD method is improved in this paper. Mirror extending manner of data is kept unchanged, but the approach for determining envelopes is changed. When the end of data is obviously not extremum, the envelope is determined by the first inner extremum and the image value in the mirror, ignoring the value on the end. This improvement eliminates the frequency compression near the end and decreases the error. Meanwhile, tridiagonal equations are used and the calculation speed is much increased. The temporal process curve is more important in reflecting the real physical process and comparable with other phenomena. Frequency mixing in IMFs makes it impossible. A high frequency reconstruction (HFR) approach is proposed to eliminate common frequency mixing and reconstruct an IMF with all high frequency portions. By this approach, the IMFs without frequency mixing are obtained to express significative processes. The high frequency information restored in high frequency IMF can be extracted by general spectrum method. After obtaining IMFs by EMD method, some of the theoretical and technological issues still exist when using the IMFs. The consistency of IMFs with real physical process is discussed in detail. By virtue of the approach proposed in this paper, the EMD method can be widely used in various fields.
基金This project is financially supported by State Key Fundamental Research of "973" Development Plan (No. G2000067208-4)
文摘A self-made single-roll stirring (SRS) machine was used to manufacturesemisolid A2017 alloy, the mechanism of A2017 alloy formation was investigated. It was shown thatA2017 dendrites growing on the rough roll surface are crashed into fragments by the roll, which moveand grow freely then contribute the formation of finer spherical microstruc-ture. When casting at710-750℃, fine and homogeneous spherical or elliptical grains of A2017 alloy were obtained.Extending forming mould has been designed and was installed at the exit of roll-shoe gap. A2017alloy was formed by extending continuously at the semisolid state on SRS machine. Throughcontrolling pouring temperature, semisolid forming and extending extrusion was combined organically.A2017 product with fine surface and rectangular transection of 14 mm x 25 mm was obtained. Bycontrast to the national standard, the fracture strength and elongation of A2017 products producedfrom extending semisolid extrusion have been improved with an increase of 100 MPa and 29%,respectively.
基金supported by the projects of the National Natural Science Foundation of China(NSFC)(Grant No.40272086,40234048 and 49972071)International Collaborative Research Projects of NSFC(Grants No.4991012214,4000122036)Geological Survey of China Mapping Project(Grant No.20001300005141).
文摘The northwest trending tectonic belt in the middle part of the Mesozoic intraplate Yanshan Orogenic Belt, northeast Hebei Province, is composed of thrusts, extensional faults, strike-slip faults and syntectonic sedimentations as well. The northeastward basement-involved major thrusting deformation occurred between 174Ma and 168MaBP and was followed by an intrusion of the granitic plutonic rocks. As a part of the post-thrusting extensional deformations a northwest extending volcano-sedimentation system of Late Jurassic and Early Cretaceous formed in the southwest side of the belt. These volcano-sedimentary sequences are divided into Tuchengzi Formation, Zhangjiakou Formation, Yixian Formation and Jiufotang Formation re- spectively. They are characterized by southeastward migration as a result of the increasing down-dip slip displacement along the major extensional fault toward the southeast of the belt. The provenance area of the Jiufotang Formation north to it experienced southwestward thrusting during and after its later sedimentation. The thrusting in this stage resulted in the formation of an asymmetric footwall syncline with vergence to SW in the Jiufotang Formation in the NE side of the basin. Finally a dextral strike-slip deformation occurred along the NW tectonic belt. The striking tectono-geomorphological features and present seismic activities along this belt indicate that it has been being active since Cenozoic era and is still in the active state at present. This northwest extending tectonic belt was following the same direction and location as the existing fault systems within the basement as revealed by former geological and geophysical studies. So it is reasonable to infer the Mesozoic deformation along this belt to be a result of reactivation of the basement structures in a favorable tectonic stress field. The reactivation of basement struc- tures might be taken as one of the mechanisms of intraplate deformation and orogeny.
基金Supported by the National Natural Science Foundation of China (Grant Nos. 50525721, 50595411) Chinese State Power Corporation (Grant No. SPKJ008-05)
文摘There exists a large class of nonlinear systems with uncertainties, such as hydrau- lic turbine governors, whose robust control problem is hard to solve by means of the existing robust control approaches. For this class of systems, this work pre- sents a dynamic extending H∞ controller via both differential geometry and H∞ the- ory. Furthermore, based on differential game theory, it has been verified that the proposed control strategy has robustness in the sense that the disturbance can be attenuated effectively because the L2-gain from the disturbance input to the regu- lation output signal could be reduced to any given level. Thirdly, a robust control strategy for hydraulic turbine governor is designed according to the proposed ex- tending H∞ control method, and has been developed into a real control equipment. Finally the field experiments are carried out which show clearly that the developed control equipment can enhance transient stability of power systems more effec- tively than the conventional controller.
基金Financial support from the National Natural Science Foundation of China(Project No.51176187 and 51206163)International special cooperation projects(Project No.2014DFR70080)
文摘Casing treatment is one possible way of regaining axial compressor operating range. However, most of casing treatments extend the operating range with the cost of efficiency penalty. A new form of multiple cylindrical holes casing treatment(MHCT) with pre-swirl blowing for the NASA Rotor-37 has been designed based on profound understanding of the stall inception. Unsteady numerical simulations have been performed for Rotor-37 with and without MHCT. Parametric studies of the total extraction holes area and their axial locations show that the compressor performance deteriorates as the area ratio increases but the stall margin is extended and there is an optimum extraction holes axial location for stall margin extending. The better configuration of MHCT could extend the stall margin by 6.2% with only 0.23% peak efficiency reduction. Detailed analysis of the physical mechanism behind the stall margin improvement shows that the casing treatment could eliminate the passage blockage by suppressing breakup of tip leakage vortex and decrease the blade load in tip region, which both contribute to improve stall margin of transonic axial compressors.
