In this study, we modified a polytetrafluoroethylene （PTFE） hollow-fiber membrane element used for submerged membrane bioreactors （MBRs） to reduce the energy consumption during MBR processes. The high mechanical s...In this study, we modified a polytetrafluoroethylene （PTFE） hollow-fiber membrane element used for submerged membrane bioreactors （MBRs） to reduce the energy consumption during MBR processes. The high mechanical strength of the PTFE membrane made it possible to increase the effective length of the membrane fiber from 2 to 3 m. In addition, the packing density was increased by 20% by optimizing the membrane element configuration. These modifications improve the efficiency of membrane cleaning associated with aeration. The target of specific energy consumption was less than 0.4 kWh·m^-3 in this study. The continuous operation of a pilot MBR treating real municipal wastewater revealed that the MBR utilizing the modified membrane element can be stably operated under a specific air demand per membrane surface area （SADm） of 0.13 m^3·m^-2. hr I when the daily- averaged membrane fluxes for the constant flow rate and flow rate fluctuating modes of operation were set to 0,6 and 0.5m^3·m^-2·d^-1 respectively. The specific energy consumption under these operating conditions was estimated to be less than 0.37 kWh.m^-3. These results strongly suggest that operating an MBR equipped with the modified membrane element with a specific energy consumption of less than 0.4 kWh·m^-3 is highly possible.展开更多
With the full treatment of the Helfrich model we theoretically study the symmetrical adhesion of two cylindrical colloids to a tubular membrane. The adhesion of the rigid cylinders with different radius from the membr...With the full treatment of the Helfrich model we theoretically study the symmetrical adhesion of two cylindrical colloids to a tubular membrane. The adhesion of the rigid cylinders with different radius from the membrane tube surface can produce both shallow wrapping with relatively small wrapping angle and deep wrapping with big wrapping angle. These significant structural behaviors can be obtained by analyzing the system energy. A second order adhesion transition from the desorbed to weakly adhered states is found, and a first order phase transition where the cylindrical colloids undergo an abrupt transition from weakly adhered to strongly adhered states can be obtained as well.展开更多
文摘In this study, we modified a polytetrafluoroethylene （PTFE） hollow-fiber membrane element used for submerged membrane bioreactors （MBRs） to reduce the energy consumption during MBR processes. The high mechanical strength of the PTFE membrane made it possible to increase the effective length of the membrane fiber from 2 to 3 m. In addition, the packing density was increased by 20% by optimizing the membrane element configuration. These modifications improve the efficiency of membrane cleaning associated with aeration. The target of specific energy consumption was less than 0.4 kWh·m^-3 in this study. The continuous operation of a pilot MBR treating real municipal wastewater revealed that the MBR utilizing the modified membrane element can be stably operated under a specific air demand per membrane surface area （SADm） of 0.13 m^3·m^-2. hr I when the daily- averaged membrane fluxes for the constant flow rate and flow rate fluctuating modes of operation were set to 0,6 and 0.5m^3·m^-2·d^-1 respectively. The specific energy consumption under these operating conditions was estimated to be less than 0.37 kWh.m^-3. These results strongly suggest that operating an MBR equipped with the modified membrane element with a specific energy consumption of less than 0.4 kWh·m^-3 is highly possible.
基金Project supported by the National Natural Science Foundation of China(Grant No.11074151)the National Key Basic Research and Development Program of China(Grant No.2011CB808100)
文摘With the full treatment of the Helfrich model we theoretically study the symmetrical adhesion of two cylindrical colloids to a tubular membrane. The adhesion of the rigid cylinders with different radius from the membrane tube surface can produce both shallow wrapping with relatively small wrapping angle and deep wrapping with big wrapping angle. These significant structural behaviors can be obtained by analyzing the system energy. A second order adhesion transition from the desorbed to weakly adhered states is found, and a first order phase transition where the cylindrical colloids undergo an abrupt transition from weakly adhered to strongly adhered states can be obtained as well.
