Nanosized Fe^3＋ and Eu^3＋ codoped CeO2 solid solutions were synthesized via hydrothermal method. The crystalline structure of Ce1-x（Fe0.5Eu0.5）xO2-δx=0.00–0.30） solid solutions was carried out by the X-ray diff...Nanosized Fe^3＋ and Eu^3＋ codoped CeO2 solid solutions were synthesized via hydrothermal method. The crystalline structure of Ce1-x（Fe0.5Eu0.5）xO2-δx=0.00–0.30） solid solutions was carried out by the X-ray diffraction technique, and the spectrum features were identified by UV-Vis and Raman spectroscopy, respectively. It was observed that the cell parameters were first increased then decreased by increasing the doped ions content. The phase separation was detected when the dopant concentration reached to x=0.30. UV-Vis spectrum showed that the width of the band gap gradually reduced by increasing the doped content, and the solid solubility was determined to be x=0.20. The Raman technique displayed that the peak position of F2g mode gradually shifted to lower frequencies from 465 cm^–1 for x=0.00 to 440 cm^–1 for x=0.20. The catalytic effects of Ce1-x（Fe0.5Eu0.5）xO2-δsolid solutions on the electrochemistry properties of Mg2Ni/Ni were measured by mixing them together via ball milling technique. The electrochemical properties of the Mg_2Ni/Ni-Ce1-x（Fe0.5Eu0.5）xO2-δcomposites showed that the maximum discharge capability Cmax and the cycle stability were improved obviously. Meanwhile, the EIS characteristic also indicated that the doped solid solutions could enhance the rate of charge transfer on the surface of alloy. The catalytic effect of the solid solutions was speculated to rely on both the concentration of oxygen vacancies and the cell volumes of the solid solutions.展开更多
Co2＋-doped LiFePO4/C composite material was prepared by solid-state synthesis method using Fe2O3,Li2CO3 and NH4H2PO4 as the starting materials.The structures and elec-trochemical performance of samples were studied b...Co2＋-doped LiFePO4/C composite material was prepared by solid-state synthesis method using Fe2O3,Li2CO3 and NH4H2PO4 as the starting materials.The structures and elec-trochemical performance of samples were studied by XRD,SEM and constant current charge-discharge method.The results showed that the Co2＋ doping did not change the crystal structure of LiFePO4.The unit cell volume changed with the increase of Co2＋,and reached the maximum at x = 0.04.The LiFe0.96Co0.04PO4/C sample proved the best electrochemical properties.Its initial discharge capacity was 138.5 mA·h /g at 1 C rate.After 30 cycles,the capacity remained 127.7 mA·h /g,and the capacity retention rate was 92.2%.展开更多
基金Project supported by the National Natural Science Foundation of China(51501059)Talent Incubation Funding of School of Materials and Metallurgy and Inner Mongolia University of Science and Technology(2014CY012)
文摘Nanosized Fe^3＋ and Eu^3＋ codoped CeO2 solid solutions were synthesized via hydrothermal method. The crystalline structure of Ce1-x（Fe0.5Eu0.5）xO2-δx=0.00–0.30） solid solutions was carried out by the X-ray diffraction technique, and the spectrum features were identified by UV-Vis and Raman spectroscopy, respectively. It was observed that the cell parameters were first increased then decreased by increasing the doped ions content. The phase separation was detected when the dopant concentration reached to x=0.30. UV-Vis spectrum showed that the width of the band gap gradually reduced by increasing the doped content, and the solid solubility was determined to be x=0.20. The Raman technique displayed that the peak position of F2g mode gradually shifted to lower frequencies from 465 cm^–1 for x=0.00 to 440 cm^–1 for x=0.20. The catalytic effects of Ce1-x（Fe0.5Eu0.5）xO2-δsolid solutions on the electrochemistry properties of Mg2Ni/Ni were measured by mixing them together via ball milling technique. The electrochemical properties of the Mg_2Ni/Ni-Ce1-x（Fe0.5Eu0.5）xO2-δcomposites showed that the maximum discharge capability Cmax and the cycle stability were improved obviously. Meanwhile, the EIS characteristic also indicated that the doped solid solutions could enhance the rate of charge transfer on the surface of alloy. The catalytic effect of the solid solutions was speculated to rely on both the concentration of oxygen vacancies and the cell volumes of the solid solutions.
基金Sponsored by the Graduate Innovation Fund of Shaanxi University of Science and Technology
文摘Co2＋-doped LiFePO4/C composite material was prepared by solid-state synthesis method using Fe2O3,Li2CO3 and NH4H2PO4 as the starting materials.The structures and elec-trochemical performance of samples were studied by XRD,SEM and constant current charge-discharge method.The results showed that the Co2＋ doping did not change the crystal structure of LiFePO4.The unit cell volume changed with the increase of Co2＋,and reached the maximum at x = 0.04.The LiFe0.96Co0.04PO4/C sample proved the best electrochemical properties.Its initial discharge capacity was 138.5 mA·h /g at 1 C rate.After 30 cycles,the capacity remained 127.7 mA·h /g,and the capacity retention rate was 92.2%.
