In order to fabricate highly-conductive glass fibers using graphene as multi-functional coatings, we reported the preparation of graphene-coated glass fibers with high electrical conductivity through solgel and dip-co...In order to fabricate highly-conductive glass fibers using graphene as multi-functional coatings, we reported the preparation of graphene-coated glass fibers with high electrical conductivity through solgel and dip-coating technique in a simple way. Graphene oxide (GO) was partially reduced to graphene hydrosol, and then glass fibers were dipped and coated with the reduced GO (rGO). After repeated solgel and dip-coating treatment, the glass fibers were fully covered with rGO coatings, and consequently exhibited increased hydrophobicity and high electrical conductivity. The graphene-coated fibers exhibited good electrical conductivity of 24.9 S/cm, being higher than that of other nanocarbon-coated fibers and commercial carbon fibers, which is mainly attributed to the high intrinsic electrical conductivity of rGO and full coverage of fiber surfaces. The wettability and electrical conductivity of the coated fibers strongly depended on the dip-coating times and coating thickness, which is closely associated with coverage degree and compact structure of the graphene coatings. By virtue of high conductivity and easy operation, the graphene-coated glass fibers have great potential to be used as flexible conductive wires, highly-sensitive sensors, and multi-functional fibers in many fields.展开更多
Abstract Advanced crack monitoring technique is the cornerstone of aircraft structural health monitoring. To achieve realtime crack monitoring of aircraft metal structures in the course of ser vice, a new crack monito...Abstract Advanced crack monitoring technique is the cornerstone of aircraft structural health monitoring. To achieve realtime crack monitoring of aircraft metal structures in the course of ser vice, a new crack monitoring method is proposed based on Cu coating sensor and electrical poten tial difference principle. Firstly, insulation treatment process was used to prepare a dielectric layer on structural substrate, such as an anodizing layer on 2AI2T4 aluminum alloy substrate, and then a Cu coating crack monitoring sensor was deposited on the structure fatigue critical parts by pulsed bias arc ion plating technology. Secondly, the damage consistency of the Cu coating sensor and 2A12T4 aluminum alloy substrate was investigated by static tensile experiment and fatigue test. The results show that strain values of the coating sensor and the 2A 12T4 aluminum alloy substrate measured by strain gauges are highly coincident in static tensile experiment and the sensor has excel lent fatigue damage consistency with the substrate. Thirdly, the fatigue performance discrepancy between samples with the coating sensor and original samples was investigated. The result shows that there is no obvious negative influence on the fatigue performance of the 2A12T4 aluminum alloy after preparing the Cu coating sensor on its surface. Finally, crack monitoring experiment was carried out with the Cu coating sensor. The experimental results indicate that the sensor is sensitive to crack, and crack origination and propagation can be monitored effectively through analyzing the change of electrical potential values of the coating sensor.展开更多
Graphene possess extremely high thermal conductivity, and they have been regarded as prominent candidates to be used in thermal management of electronic devices. However, addition of graphene inevitably causes dramati...Graphene possess extremely high thermal conductivity, and they have been regarded as prominent candidates to be used in thermal management of electronic devices. However, addition of graphene inevitably causes dramatic decrease in electrical insulation, which is generally unacceptable for thermal interface materials(TIMs) in real electronic industry. Developing graphene-based nanocomposites with high thermal conductivity and satisfactory electrical insulation is still a challenging issue. In this study,we developed a novel hybrid nanocomposite by incorporating silica-coated graphene nanoplatelets(Silica@GNPs) with polydimethylsiloxane(PDMS) matrix. The obtained Silica@GNP/PDMS composites showed satisfactory electrical insulation(electrical resistivity of over 10^(13)Ωcm) and high thermal conductivity of 0.497 W m-1K-1, increasing by 155% compared with that of neat PDMS, even higher than that of GNP/PDMS composites. Such high thermal conductivity and satisfactory electrical insulation is mainly attributed to the insulating silica-coating, good compatibility between components, strong interfacial bonding, uniform dispersion, and high-efficiency heat transport pathways. There is great potential for the Silica@GNP/PDMS composites to be used as high-performance TIMs in electronic industry.展开更多
In order to impart electrical conductivity to the magnesium alloy micro-arc oxidation(MAO)coating,the electroless copper plating was performed.Effects of plating temperature and complexing agent concentration on the p...In order to impart electrical conductivity to the magnesium alloy micro-arc oxidation(MAO)coating,the electroless copper plating was performed.Effects of plating temperature and complexing agent concentration on the properties of the electroless copper plating layers were studied by measuring their microstructure,corrosion resistance and electrical conductivity.It was found that the optimized plating temperature was 60°C,and the most suitable value of the complexing agent concentration was 30 g/L.Under this condition,a complete and dense plating layer could be obtained.The formation mechanism of the plating layer on magnesium alloy MAO coating was analyzed.A three-stage model of the plating process was proposed.The square resistance of the plated specimen was finally reduced to 0.03Ω/□after the third stage.Through electroless copper plating,the MAO coated sample obtained excellent electrical conductivity without significantly reducing its corrosion resistance.展开更多
基金financial supports from the National Natural Science Foundation of China (No. 51802317)Department of Science and Technology of Shenyang City (No. 17-231-1-66)Shenyang National Laboratory for Materials Science (No. 2017RP11)
文摘In order to fabricate highly-conductive glass fibers using graphene as multi-functional coatings, we reported the preparation of graphene-coated glass fibers with high electrical conductivity through solgel and dip-coating technique in a simple way. Graphene oxide (GO) was partially reduced to graphene hydrosol, and then glass fibers were dipped and coated with the reduced GO (rGO). After repeated solgel and dip-coating treatment, the glass fibers were fully covered with rGO coatings, and consequently exhibited increased hydrophobicity and high electrical conductivity. The graphene-coated fibers exhibited good electrical conductivity of 24.9 S/cm, being higher than that of other nanocarbon-coated fibers and commercial carbon fibers, which is mainly attributed to the high intrinsic electrical conductivity of rGO and full coverage of fiber surfaces. The wettability and electrical conductivity of the coated fibers strongly depended on the dip-coating times and coating thickness, which is closely associated with coverage degree and compact structure of the graphene coatings. By virtue of high conductivity and easy operation, the graphene-coated glass fibers have great potential to be used as flexible conductive wires, highly-sensitive sensors, and multi-functional fibers in many fields.
基金co-supported by the National Natural Science Foundation of China(No.51201182)
文摘Abstract Advanced crack monitoring technique is the cornerstone of aircraft structural health monitoring. To achieve realtime crack monitoring of aircraft metal structures in the course of ser vice, a new crack monitoring method is proposed based on Cu coating sensor and electrical poten tial difference principle. Firstly, insulation treatment process was used to prepare a dielectric layer on structural substrate, such as an anodizing layer on 2AI2T4 aluminum alloy substrate, and then a Cu coating crack monitoring sensor was deposited on the structure fatigue critical parts by pulsed bias arc ion plating technology. Secondly, the damage consistency of the Cu coating sensor and 2A12T4 aluminum alloy substrate was investigated by static tensile experiment and fatigue test. The results show that strain values of the coating sensor and the 2A 12T4 aluminum alloy substrate measured by strain gauges are highly coincident in static tensile experiment and the sensor has excel lent fatigue damage consistency with the substrate. Thirdly, the fatigue performance discrepancy between samples with the coating sensor and original samples was investigated. The result shows that there is no obvious negative influence on the fatigue performance of the 2A12T4 aluminum alloy after preparing the Cu coating sensor on its surface. Finally, crack monitoring experiment was carried out with the Cu coating sensor. The experimental results indicate that the sensor is sensitive to crack, and crack origination and propagation can be monitored effectively through analyzing the change of electrical potential values of the coating sensor.
基金the financial support from the Ministry of Science and Technology of China(No.2012AA030303)the Department of Science and Technology of Shenyang City(No.17-231-1-66)+2 种基金the Hundred Talents Program of Chinese Academy of Sciences(No.CAS2012)the Fund for Creative Research Groups(No.51221264)the Fund of Shenyang National Laboratory for Materials Science(Nos.2015RP13 and2017RP11)
文摘Graphene possess extremely high thermal conductivity, and they have been regarded as prominent candidates to be used in thermal management of electronic devices. However, addition of graphene inevitably causes dramatic decrease in electrical insulation, which is generally unacceptable for thermal interface materials(TIMs) in real electronic industry. Developing graphene-based nanocomposites with high thermal conductivity and satisfactory electrical insulation is still a challenging issue. In this study,we developed a novel hybrid nanocomposite by incorporating silica-coated graphene nanoplatelets(Silica@GNPs) with polydimethylsiloxane(PDMS) matrix. The obtained Silica@GNP/PDMS composites showed satisfactory electrical insulation(electrical resistivity of over 10^(13)Ωcm) and high thermal conductivity of 0.497 W m-1K-1, increasing by 155% compared with that of neat PDMS, even higher than that of GNP/PDMS composites. Such high thermal conductivity and satisfactory electrical insulation is mainly attributed to the insulating silica-coating, good compatibility between components, strong interfacial bonding, uniform dispersion, and high-efficiency heat transport pathways. There is great potential for the Silica@GNP/PDMS composites to be used as high-performance TIMs in electronic industry.
基金financially supported by the National Key Research and Development Program of China(No.2016YFB0301105)the National Natural Science Foundation of China(No.51804190)+4 种基金the Shandong Provincial Natural Science Foundation,China(No.ZR2021ME240)the Youth Science Funds of Shandong Academy of Sciences,China(No.2020QN0022)the Shandong Province Key Research and Development Plan,China(Nos.2019GHZ019 and 2019JZZY020329)the Jinan Science&Technology Bureau,China(No.2019GXRC030)the Innovation Pilot Project for Fusion of Science,Education and Industry(International Cooperation)from Qilu University of Technology(Shandong Academy of Sciences),China(No.2020KJC-GH03)。
文摘In order to impart electrical conductivity to the magnesium alloy micro-arc oxidation(MAO)coating,the electroless copper plating was performed.Effects of plating temperature and complexing agent concentration on the properties of the electroless copper plating layers were studied by measuring their microstructure,corrosion resistance and electrical conductivity.It was found that the optimized plating temperature was 60°C,and the most suitable value of the complexing agent concentration was 30 g/L.Under this condition,a complete and dense plating layer could be obtained.The formation mechanism of the plating layer on magnesium alloy MAO coating was analyzed.A three-stage model of the plating process was proposed.The square resistance of the plated specimen was finally reduced to 0.03Ω/□after the third stage.Through electroless copper plating,the MAO coated sample obtained excellent electrical conductivity without significantly reducing its corrosion resistance.
