This study focused on the investigation of the edge effect of diamond films deposited by microwave plasma chemical vapor de-position.Substrate bulge height△h is a factor that affects the edge effect,and it was used t...This study focused on the investigation of the edge effect of diamond films deposited by microwave plasma chemical vapor de-position.Substrate bulge height△h is a factor that affects the edge effect,and it was used to simulate plasma and guide the diamond-film deposition experiments.Finite-element software COMSOL Multiphysics was used to construct a multiphysics(electromagnetic,plasma,and fluid heat transfer fields)coupling model based on electron collision reaction.Raman spectroscopy and scanning electron microscopy were performed to characterize the experimental growth and validate the model.The simulation results reflected the experimental trends observed.Plasma discharge at the edge of the substrate accelerated due to the increase in△h(△h=0-3 mm),and the values of electron density(n_(c)),molar concentration of H(C_(H)),and molar concentration of CH_(3)(C_(CH_(3)))doubled at the edge(for the special concave sample with△h=−1 mm,the active chemical groups exhibited a decreased molar concentration at the edge of the substrate).At=0-3 mm,a high diamond growth rate and a large diamond grain size were observed at the edge of the substrate,and their values increased with.The uniformity of film thickness decreased with.The Raman spectra of all samples revealed the first-order characteristic peak of dia-mond near 1332 cm^(−1).When△h=−1 mm,tensile stress occurred in all regions of the film.When△h=1-3 mm,all areas in the film ex-hibited compressive stress.展开更多
The effects of equilibrium toroidal rotation during edge-localized mode(ELM)mitigated by resonant magnetic perturbation(RMP)are studied with the experimental equilibria of the EAST tokamak based on the four-field mode...The effects of equilibrium toroidal rotation during edge-localized mode(ELM)mitigated by resonant magnetic perturbation(RMP)are studied with the experimental equilibria of the EAST tokamak based on the four-field model in the BOUT++code.As the two main parameters to determine the toroidal rotation profiles,the rotation shear and magnitudes were separately scanned to investigate their roles in the impact of RMPs on peeling-ballooning(P-B)modes.On one hand,the results show that strong toroidal rotation shear is favorable for the enhancement of the self-generated E×B shearing rate<ω_(E×B)>with RMPs,leading to significant ELM mitigation with RMP in the stronger toroidal rotation shear region.On the other hand,toroidal rotation magnitudes may affect ELM mitigation by changing the penetration of the RMPs,more precisely the resonant components.RMPs can lead to a reduction in the pedestal energy loss by enhancing the multimode coupling in the turbulence transport phase.The shielding effects on RMPs increase with the toroidal rotation magnitude,leading to the enhancement of the multimode coupling with RMPs to be significantly weakened.Hence,the reduction in pedestal energy loss by RMPs decreased with the rotation magnitude.In brief,the results show that toroidal rotation plays a dual role in ELM mitigation with RMP by changing the shielding effects of plasma by rotation magnitude and affecting<ω_(E×B)>by rotation shear.In the high toroidal rotation region,toroidal rotation shear is usually strong and hence plays a dominant role in the influence of RMP on P-B modes,whereas in the low rotation region,toroidal rotation shear is weak and has negligible impact on P-B modes,and the rotation magnitude plays a dominant role in the influence of RMPs on the P-B modes by changing the field penetration.Therefore,the dual role of toroidal rotation leads to stronger ELM mitigation with RMP,which may be achieved both in the low toroidal rotation region and the relatively high rotation region that has strong rotational shear.展开更多
To control the steady-state operation of Tokamak plasma, it is crucial to accurately obtain its shape and position. This paper presents a method for use in rapidly detecting plasma configuration during discharge of th...To control the steady-state operation of Tokamak plasma, it is crucial to accurately obtain its shape and position. This paper presents a method for use in rapidly detecting plasma configuration during discharge of the Experimental Advanced Superconducting Tokamak device. First, a visible/infrared integrated endoscopy diagnostic system with a large field of view is introduced,and the PCO.edge5.5 camera in this system is used to acquire a plasma discharge image. Based on the analysis of various traditional edge detection algorithms, an improved wavelet edge detection algorithm is then introduced to identify the edge of the plasma. In this method, the local maximum of the modulus of wavelet transform is searched along four gradient directions, and the adaptive threshold is adopted. Finally, the detected boundary is fitted using the least square iterative method to accurately obtain the position of the plasma. Experimental results obtained using the EAST device show that the method presented in this paper can realize expected goals and produce ideal effects;this method thus has significant potential for application in further feedback control of plasma.展开更多
In the Large Helical Device （LHD）, two different divertor configurations, i.e. helical divertor （HD） and local island divertor （LID）, are utilized to control the edge plasma. The HD with two X-points is an intri...In the Large Helical Device （LHD）, two different divertor configurations, i.e. helical divertor （HD） and local island divertor （LID）, are utilized to control the edge plasma. The HD with two X-points is an intrinsic divertor for heliotron devices, accompanied with a relatively thick ergodic layer outside the confinement region. Edge and divertor plasma behavior from low density to high density regimes is presented, referring to the divertor detachment. The effect of the ergodic layer on the edge transport is also discussed. On the other hand, the LID is an advanced divertor concept which realizes a high pumping efficiency by the combination of an externally induced magnetic island and a closed pumping system. Experimental results to confirm the fundamental divertor performance of the LID are presented.展开更多
The dominant wavelength range of edge impurity emissions moves from the visible range to the vacuum ultraviolet(VUV)range,as heating power increasing in the Experimental Advanced Superconducting Tokamak(EAST).The meas...The dominant wavelength range of edge impurity emissions moves from the visible range to the vacuum ultraviolet(VUV)range,as heating power increasing in the Experimental Advanced Superconducting Tokamak(EAST).The measurement provided by the existing visible spectroscopies in EAST is not sufficient for impurity transport studies for high-parameters plasmas.Therefore,in this study,a VUV spectroscopy is newly developed to measure edge impurity emissions in EAST.One Seya-Namioka VUV spectrometer(McPherson 234/302)is used in the system,equipped with a concave-corrected holographic grating with groove density of 600 grooves mm-1.Impurity line emissions can be observed in the wavelength range ofλ=50-700 nm,covering VUV,near ultraviolet and visible ranges.The observed vertical range is Z=-350-350 mm.The minimum sampling time can be set to 5 ms under full vertical binning(FVB)mode.VUV spectroscopy has been used to measure the edge impurity emission for the 2019 EAST experimental campaign.Impurity spectra are identified for several impurity species,i.e.,lithium(Li),carbon(C),oxygen(O),and iron(Fe).Several candidates for tungsten(W)lines are also measured but their clear identification is very difficult due to a strong overlap with Fe lines.Time evolutions of impurity carbon emissions of CⅡat 134.5 nm and CⅢat 97.7 nm are analyzed to prove the system capability of time-resolved measurement.The measurements of the VUV spectroscopy are very helpful for edge impurity transport study in the high-parameters plasma in EAST.展开更多
The high confinement mode （H-mode） operation is recently obtained in HL-2A divertor configuration, the corresponding edge localized mode （ELM） is recognized as being of type III. Time intervals in ELM time series ...The high confinement mode （H-mode） operation is recently obtained in HL-2A divertor configuration, the corresponding edge localized mode （ELM） is recognized as being of type III. Time intervals in ELM time series are analysed to obtain the information about the ELM process. Signatures of unstable periodic orbits （UPOs） are detected, which are indicators of chaos and may be used to control the big ELM events.展开更多
We report on experimental observation of non-laminar proton acceleration modulated by a strong magnetic field in laser irradiating micrometer aluminum targets.The results illustrate the coexistence of ring-like and fi...We report on experimental observation of non-laminar proton acceleration modulated by a strong magnetic field in laser irradiating micrometer aluminum targets.The results illustrate the coexistence of ring-like and filamentation structures.We implement the knife edge method into the radiochromic film detector to map the accelerated beams,measuring a source size of 30-110μm for protons of more than 5 MeV.The diagnosis reveals that the ring-like profile originates from low-energy protons far off the axis whereas the filamentation is from the near-axis high-energy protons,exhibiting non-laminar features.Particle-in-cell simulations reproduced the experimental results,showing that the short-term magnetic turbulence via Weibel instability and the long-term quasi-static annular magnetic field by the streaming electric current account for the measured beam profile.Our work provides direct mapping of laser-driven proton sources in the space-energy domain and reveals the non-laminar beam evolution at featured time scales.展开更多
Experiments on lower hybrid wave （LHW） coupling were investigated in the HT- 7 tokamak. Good coupling of LHW plasma has been demonstrated at different conditions in the HT-7 tokamak. Relevant results have proved tha...Experiments on lower hybrid wave （LHW） coupling were investigated in the HT- 7 tokamak. Good coupling of LHW plasma has been demonstrated at different conditions in the HT-7 tokamak. Relevant results have proved that LHW-plasma coupling is affected by the phase difference between adjacent waveguides. Furthermore, the edge density around the grill and relevant coupling can be adjusted by changing the plasma line average density or the gap value between the LH grill and the last closed flux surfaces （LCFS）. It is found that the coupling of LHWs becomes poor when the edge density around the LH grill is large enough in the HT-7 tokamak, and that coupling remains good with a proper edge density. With increasing LHW power, it is also found that the reflection coefficients （RCs） increase due to non-linear effects under conditions of low edge recycling, but can decrease under high edge recycling. The edge density depends mainly on the competition between the ponderomotive force （PMF） and the edge recycling intensity in the HT-7 tokamak.展开更多
Controlling the heat and particle fluxes in the plasma edge and on the plasma facing components is important for the safe and effective operation of every magnetically confined fusion device.This was attempted on Wend...Controlling the heat and particle fluxes in the plasma edge and on the plasma facing components is important for the safe and effective operation of every magnetically confined fusion device.This was attempted on Wendelstein 7-X in the first operational campaign,with the modification of the magnetic configuration by use of the trim coils and tuning the field coil currents,commonly named iota scan.Ideally,the heat loads on the five limiters are equal.However,they differ between each limiter and are non-uniform,due to the（relatively small） error fields caused by the misalignment of components.It is therefore necessary to study the influence of the configuration changes on the transport of heat and particles in the plasma edge caused by the application of error fields and the change of the magnetic configuration.In this paper the upstream measurements conducted with the combined probe are compared to the downstream measurements with the DIAS infrared camera on the limiter.展开更多
Transport of carbon in the edge plasma of EAST with a heating power Pin of 8 MW is studied using DIVIMP code. The background plasmas for DIVIMP are taken from the results by using B2.5-Eirene code. For different plasm...Transport of carbon in the edge plasma of EAST with a heating power Pin of 8 MW is studied using DIVIMP code. The background plasmas for DIVIMP are taken from the results by using B2.5-Eirene code. For different plasma densities at the core-SOL interface and the different divertor operational regimes, namely low recycling, high recycling and detachment, the simulated results show that the impurity density in SOL is higher for the high recycling regime than that for the low recycling regime, while impurity density in SOL is lower for the detachment regime than that for both the low and high recycling regimes.展开更多
A fast video camera is verified to be a powerful t0ol for observation of filaments/blobs near the last closed flux surface （LCFS）. In order to extract the fluctuation component from the raw data of the fast camera, ...A fast video camera is verified to be a powerful t0ol for observation of filaments/blobs near the last closed flux surface （LCFS）. In order to extract the fluctuation component from the raw data of the fast camera, a pre-processing technique, sliding time window averaging subtraction （STWAS） has been developed to remove the background of slowly varying emission from the bulk plasma. By using this pre-processing technique, the fast camera data are analyzed. A method to identify the filaments in the pre-processed image is also discussed.展开更多
In this work, population coefficients of hydrogen＇s n = 3 excited state from the hydrogen collisional-radiative （CR） model, from the data file of DEGAS 2, are used to calculate the photon emissivity coefficients （...In this work, population coefficients of hydrogen＇s n = 3 excited state from the hydrogen collisional-radiative （CR） model, from the data file of DEGAS 2, are used to calculate the photon emissivity coefficients （PECs） of hydrogen Balmer-α （n = 3 →n = 2） （Hα）. The results are compared with the PECs from Atomic Data and Analysis Structure （ADAS） database, and a good agreement is found. A magnetic surface-averaged neutral density profile of typical double-null （DN） plasma in EAST is obtained by using FRANTIC, the 1.5-D fluid transport code. It is found that the sum of integral Dα and Hα emission intensity calculated via the neutral density agrees with the measured results obtained by using the absolutely calibrated multi-channel poloidal photodiode array systems viewing the lower divertor at the last closed flux surface （LCFS）. It is revealed that the typical magnetic surface-averaged neutral density at LCFS is about 3.5×10^16 m^-3 .展开更多
The dynamical evolution of edge turbulence during a transport bifurcation is explored using a flux-driven nonlinear fluid model with a geometry relevant to the plasma edge region.The simulations show that the self-gen...The dynamical evolution of edge turbulence during a transport bifurcation is explored using a flux-driven nonlinear fluid model with a geometry relevant to the plasma edge region.The simulations show that the self-generated mean shear flows can dramatically modify the phase angle between turbulent fluctuations.The changes in phase differences and amplitudes of edge fluctuations give rise to the modifications of turbulent edge transport.The statistical properties of flux and fluctuations are also investigated before and after edge shear flow generation.展开更多
This paper describes a Mach/Langmuir probe array with five pins and six pins, which can measure not only parallel flows and the flow perpendicular to the magnetic field but also the radial and the poloidal electric fi...This paper describes a Mach/Langmuir probe array with five pins and six pins, which can measure not only parallel flows and the flow perpendicular to the magnetic field but also the radial and the poloidal electric field E. arid E as well. Experimental measurements of the edge fluctuations, velocities of the toroidal, the poloidal flow and electric field have been carried out on both of SOL and the boundary region of HL-1M for Ohmic, biased H-mode, Lower Hybrid Current Drive (LHCD), Supersonic Molecular Beam Injection (MBI), Multi-shot Pellet Injection (MPI), Neutral Beam Injection (NBI), Ion Cyclotron Resonance Heating (ICRH) and Electric Cyclotron Resonance Heating (ECRH) discharges. The results show that the suppressions of the fluctuations are related to poloidal rotations produced by different discharge modes in the improved particle confinement property, simultaneously the change of the radial and poloidal electric field is generated and becomes more negative at the Tokamak plasma edge, and the sheared poloidal flow is related to the reduction in fluctuation level, and the poloidal velocity is mainly dominated by the E × B drift.展开更多
Abstract： An effective approach was conducted for estimating fracture toughness using the crack opening displacement （COD） method for plasma enhanced chemical vapor deposition （PECVD） coating materials. For this ...Abstract： An effective approach was conducted for estimating fracture toughness using the crack opening displacement （COD） method for plasma enhanced chemical vapor deposition （PECVD） coating materials. For this evaluation, an elastoplastic analysis was used to estimate critical COD values for single edge notched bending （SENB） specimens. The relationship between fracture toughness （Kic） and critical COD for SENB specimens was obtained. Microstructure of the interface between AleO3-TiO2 composite ceramic coatings and AISI 1045 steel substrates was studied by using scanning electron microscope （SEM）. Chemical compositions were clarified by energy-dispersive X-ray spectroscopy （EDS）. The results show that the interface between of Al203-TiO2 and substrate has mechanical combining. The nanohardness of the coatings can reach 1 200 GPa examined by nanoindentation. The Klc was calculated according to this relationship from critical COD. The bending process produces a significant relationship of COD independent of the axial force applied. Fractographic analysis was conducted to determine the crack length. From the physical analysis of nanoindentation curves, the elastic modulus of 1045/AI2O3-TiO2 is 180 GPa for the 50 μm film. The highest value of fracture toughness for 1045/A1203-TiO2-250 μm is 348 MPa·mv2.展开更多
Edge plasma features in typical HL- 1M discharges were presented. Particle confinement and plasma rotation have been investigated in the discharges with lower hybrid current drive (LHCD), molecular beam injection (MB...Edge plasma features in typical HL- 1M discharges were presented. Particle confinement and plasma rotation have been investigated in the discharges with lower hybrid current drive (LHCD), molecular beam injection (MBI) and pellet fuelling. LHCD can make particle confinement increase a factor of 2-3 for low-density discharge. Particle confinement time and poloidal rotation can be at least doubled after pellet injection, while MBI can make confinement time increase about one order of magnitude with higher performance.展开更多
High-density experiments in the high-field-side mid-plane single-null divertor configuration have been performed for the first time on J-TEXT.The experiments show an increase in the highest central channel line-averag...High-density experiments in the high-field-side mid-plane single-null divertor configuration have been performed for the first time on J-TEXT.The experiments show an increase in the highest central channel line-averaged density from 2.73×10^(19)m^(-3) to 6.49×10^(19)m^(-3),while the X-point moves away from the target by increasing the divertor coil current.The corresponding Greenwald fraction rises from 0.50 to 0.79.For the impurity transport,the density normalized radiation intensity(absolute extreme ultraviolet and soft x-ray)of the central channel density decreased significantly(>50%)with an increase in the plasma density.To better understand the underlying physics mechanisms,the 3 D edge Monte Carlo code coupled with EIRENE(EMC3-EIRENE)has been implemented for the first time on J-TEXT.The simulation results show good agreement with the experimental findings.As the X-point moves away from the target,the divertor power decay length drops and the scrape-off layer impurity screening effect is enhanced.展开更多
基金supported by the National Key Research and Development Program(No.2019YFE03100200)the State Key Lab for Advanced Metals and Materials,the Fund of National Key Laboratory of Solid-State Microwave Devices and Circuits,the National Natural Science Foundation of China(No.52102034)the Or-ganized Research Fund of North China University of Tech-nology(No.2023YZZKY12).The authors are very grateful for the financial support of these institutions.
文摘This study focused on the investigation of the edge effect of diamond films deposited by microwave plasma chemical vapor de-position.Substrate bulge height△h is a factor that affects the edge effect,and it was used to simulate plasma and guide the diamond-film deposition experiments.Finite-element software COMSOL Multiphysics was used to construct a multiphysics(electromagnetic,plasma,and fluid heat transfer fields)coupling model based on electron collision reaction.Raman spectroscopy and scanning electron microscopy were performed to characterize the experimental growth and validate the model.The simulation results reflected the experimental trends observed.Plasma discharge at the edge of the substrate accelerated due to the increase in△h(△h=0-3 mm),and the values of electron density(n_(c)),molar concentration of H(C_(H)),and molar concentration of CH_(3)(C_(CH_(3)))doubled at the edge(for the special concave sample with△h=−1 mm,the active chemical groups exhibited a decreased molar concentration at the edge of the substrate).At=0-3 mm,a high diamond growth rate and a large diamond grain size were observed at the edge of the substrate,and their values increased with.The uniformity of film thickness decreased with.The Raman spectra of all samples revealed the first-order characteristic peak of dia-mond near 1332 cm^(−1).When△h=−1 mm,tensile stress occurred in all regions of the film.When△h=1-3 mm,all areas in the film ex-hibited compressive stress.
基金supported by the National MCF Energy R&D Program of China(Nos.2019YFE03090400 and 2019YFE03030004)National Natural Science Foundation of China(Nos.12375222 and 11775154)National Key R&D Program of China(Nos.2017YFE0301203 and 2017YFE0301101)。
文摘The effects of equilibrium toroidal rotation during edge-localized mode(ELM)mitigated by resonant magnetic perturbation(RMP)are studied with the experimental equilibria of the EAST tokamak based on the four-field model in the BOUT++code.As the two main parameters to determine the toroidal rotation profiles,the rotation shear and magnitudes were separately scanned to investigate their roles in the impact of RMPs on peeling-ballooning(P-B)modes.On one hand,the results show that strong toroidal rotation shear is favorable for the enhancement of the self-generated E×B shearing rate<ω_(E×B)>with RMPs,leading to significant ELM mitigation with RMP in the stronger toroidal rotation shear region.On the other hand,toroidal rotation magnitudes may affect ELM mitigation by changing the penetration of the RMPs,more precisely the resonant components.RMPs can lead to a reduction in the pedestal energy loss by enhancing the multimode coupling in the turbulence transport phase.The shielding effects on RMPs increase with the toroidal rotation magnitude,leading to the enhancement of the multimode coupling with RMPs to be significantly weakened.Hence,the reduction in pedestal energy loss by RMPs decreased with the rotation magnitude.In brief,the results show that toroidal rotation plays a dual role in ELM mitigation with RMP by changing the shielding effects of plasma by rotation magnitude and affecting<ω_(E×B)>by rotation shear.In the high toroidal rotation region,toroidal rotation shear is usually strong and hence plays a dominant role in the influence of RMP on P-B modes,whereas in the low rotation region,toroidal rotation shear is weak and has negligible impact on P-B modes,and the rotation magnitude plays a dominant role in the influence of RMPs on the P-B modes by changing the field penetration.Therefore,the dual role of toroidal rotation leads to stronger ELM mitigation with RMP,which may be achieved both in the low toroidal rotation region and the relatively high rotation region that has strong rotational shear.
基金supported by the National Natural Science Foundation of China(Nos.11105028 and 51505120)the National Magnetic Confinement Fusion Science Program of China(No.2015GB102004)
文摘To control the steady-state operation of Tokamak plasma, it is crucial to accurately obtain its shape and position. This paper presents a method for use in rapidly detecting plasma configuration during discharge of the Experimental Advanced Superconducting Tokamak device. First, a visible/infrared integrated endoscopy diagnostic system with a large field of view is introduced,and the PCO.edge5.5 camera in this system is used to acquire a plasma discharge image. Based on the analysis of various traditional edge detection algorithms, an improved wavelet edge detection algorithm is then introduced to identify the edge of the plasma. In this method, the local maximum of the modulus of wavelet transform is searched along four gradient directions, and the adaptive threshold is adopted. Finally, the detected boundary is fitted using the least square iterative method to accurately obtain the position of the plasma. Experimental results obtained using the EAST device show that the method presented in this paper can realize expected goals and produce ideal effects;this method thus has significant potential for application in further feedback control of plasma.
基金supported by NIFS under Grant(No.NIFS05ULPP506)in part by the JSPS-CAS Core-University Program in the field of Plasma and Nuclear Fusion
文摘In the Large Helical Device （LHD）, two different divertor configurations, i.e. helical divertor （HD） and local island divertor （LID）, are utilized to control the edge plasma. The HD with two X-points is an intrinsic divertor for heliotron devices, accompanied with a relatively thick ergodic layer outside the confinement region. Edge and divertor plasma behavior from low density to high density regimes is presented, referring to the divertor detachment. The effect of the ergodic layer on the edge transport is also discussed. On the other hand, the LID is an advanced divertor concept which realizes a high pumping efficiency by the combination of an externally induced magnetic island and a closed pumping system. Experimental results to confirm the fundamental divertor performance of the LID are presented.
基金the National Magnetic Confinement Fusion Science Program of China(Nos.2017YFE0301300 and 2018YFE0301100)National Natural Science Foundation of China(Nos.11805231,11705151)+4 种基金ASIPP Science and Research Grant(No.DSJJ-17-03)Key Program of Research and Development of Hefei Science Center(No.2017HSC-KPRD002)Anhui Provincial Natural Sci-ence Foundation(Nos.1808085QA14 and 1908085J01)Instrument Developing Project of the Chinese Academy of Sciences(No.YJKYYQ20180013)Collaborative Innovation Program of Hefei Science Center,CAS(No.2019HSC-CIP005).
文摘The dominant wavelength range of edge impurity emissions moves from the visible range to the vacuum ultraviolet(VUV)range,as heating power increasing in the Experimental Advanced Superconducting Tokamak(EAST).The measurement provided by the existing visible spectroscopies in EAST is not sufficient for impurity transport studies for high-parameters plasmas.Therefore,in this study,a VUV spectroscopy is newly developed to measure edge impurity emissions in EAST.One Seya-Namioka VUV spectrometer(McPherson 234/302)is used in the system,equipped with a concave-corrected holographic grating with groove density of 600 grooves mm-1.Impurity line emissions can be observed in the wavelength range ofλ=50-700 nm,covering VUV,near ultraviolet and visible ranges.The observed vertical range is Z=-350-350 mm.The minimum sampling time can be set to 5 ms under full vertical binning(FVB)mode.VUV spectroscopy has been used to measure the edge impurity emission for the 2019 EAST experimental campaign.Impurity spectra are identified for several impurity species,i.e.,lithium(Li),carbon(C),oxygen(O),and iron(Fe).Several candidates for tungsten(W)lines are also measured but their clear identification is very difficult due to a strong overlap with Fe lines.Time evolutions of impurity carbon emissions of CⅡat 134.5 nm and CⅢat 97.7 nm are analyzed to prove the system capability of time-resolved measurement.The measurements of the VUV spectroscopy are very helpful for edge impurity transport study in the high-parameters plasma in EAST.
基金Project supported by the National Natural Science Foundation of China (Grant No. 10990213)
文摘The high confinement mode （H-mode） operation is recently obtained in HL-2A divertor configuration, the corresponding edge localized mode （ELM） is recognized as being of type III. Time intervals in ELM time series are analysed to obtain the information about the ELM process. Signatures of unstable periodic orbits （UPOs） are detected, which are indicators of chaos and may be used to control the big ELM events.
基金supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDB16)National Natural Science Foundation of China(Nos.11875307,11935008,11804348,11705260,11905278,and 11975302)Youth Innovation Promotion Association of the Chinese Academy of Sciences.
文摘We report on experimental observation of non-laminar proton acceleration modulated by a strong magnetic field in laser irradiating micrometer aluminum targets.The results illustrate the coexistence of ring-like and filamentation structures.We implement the knife edge method into the radiochromic film detector to map the accelerated beams,measuring a source size of 30-110μm for protons of more than 5 MeV.The diagnosis reveals that the ring-like profile originates from low-energy protons far off the axis whereas the filamentation is from the near-axis high-energy protons,exhibiting non-laminar features.Particle-in-cell simulations reproduced the experimental results,showing that the short-term magnetic turbulence via Weibel instability and the long-term quasi-static annular magnetic field by the streaming electric current account for the measured beam profile.Our work provides direct mapping of laser-driven proton sources in the space-energy domain and reveals the non-laminar beam evolution at featured time scales.
基金supported by National Natural Science Foundation of China （Nos. 10875149, 10928509, 10805057, and 10905069）, the National Magnetic Confinement Fusion Science Program of China （Nos. 2010GB105003, 2010GB105004）, and the Dean Foundation of the Hefei Institutes of Physical Science, Chinese Academy of Sciences
文摘Experiments on lower hybrid wave （LHW） coupling were investigated in the HT- 7 tokamak. Good coupling of LHW plasma has been demonstrated at different conditions in the HT-7 tokamak. Relevant results have proved that LHW-plasma coupling is affected by the phase difference between adjacent waveguides. Furthermore, the edge density around the grill and relevant coupling can be adjusted by changing the plasma line average density or the gap value between the LH grill and the last closed flux surfaces （LCFS）. It is found that the coupling of LHWs becomes poor when the edge density around the LH grill is large enough in the HT-7 tokamak, and that coupling remains good with a proper edge density. With increasing LHW power, it is also found that the reflection coefficients （RCs） increase due to non-linear effects under conditions of low edge recycling, but can decrease under high edge recycling. The edge density depends mainly on the competition between the ponderomotive force （PMF） and the edge recycling intensity in the HT-7 tokamak.
基金funding from the Euratom research and training program 2014–2018 under grant agreement No.633053
文摘Controlling the heat and particle fluxes in the plasma edge and on the plasma facing components is important for the safe and effective operation of every magnetically confined fusion device.This was attempted on Wendelstein 7-X in the first operational campaign,with the modification of the magnetic configuration by use of the trim coils and tuning the field coil currents,commonly named iota scan.Ideally,the heat loads on the five limiters are equal.However,they differ between each limiter and are non-uniform,due to the（relatively small） error fields caused by the misalignment of components.It is therefore necessary to study the influence of the configuration changes on the transport of heat and particles in the plasma edge caused by the application of error fields and the change of the magnetic configuration.In this paper the upstream measurements conducted with the combined probe are compared to the downstream measurements with the DIAS infrared camera on the limiter.
基金supported by National Natural Science Foundation of China (No.10975158)in part by the National Magnetic Fusion Program of China (No.2009GB106001)
文摘Transport of carbon in the edge plasma of EAST with a heating power Pin of 8 MW is studied using DIVIMP code. The background plasmas for DIVIMP are taken from the results by using B2.5-Eirene code. For different plasma densities at the core-SOL interface and the different divertor operational regimes, namely low recycling, high recycling and detachment, the simulated results show that the impurity density in SOL is higher for the high recycling regime than that for the low recycling regime, while impurity density in SOL is lower for the detachment regime than that for both the low and high recycling regimes.
文摘A fast video camera is verified to be a powerful t0ol for observation of filaments/blobs near the last closed flux surface （LCFS）. In order to extract the fluctuation component from the raw data of the fast camera, a pre-processing technique, sliding time window averaging subtraction （STWAS） has been developed to remove the background of slowly varying emission from the bulk plasma. By using this pre-processing technique, the fast camera data are analyzed. A method to identify the filaments in the pre-processed image is also discussed.
基金supported by National Natural Science Foundation of China(Nos.11075181,10605028 and 11075180)in part by the JSPS-CAS Core-University program in the field of 'Plasma and Nuclear Fusion'
文摘In this work, population coefficients of hydrogen＇s n = 3 excited state from the hydrogen collisional-radiative （CR） model, from the data file of DEGAS 2, are used to calculate the photon emissivity coefficients （PECs） of hydrogen Balmer-α （n = 3 →n = 2） （Hα）. The results are compared with the PECs from Atomic Data and Analysis Structure （ADAS） database, and a good agreement is found. A magnetic surface-averaged neutral density profile of typical double-null （DN） plasma in EAST is obtained by using FRANTIC, the 1.5-D fluid transport code. It is found that the sum of integral Dα and Hα emission intensity calculated via the neutral density agrees with the measured results obtained by using the absolutely calibrated multi-channel poloidal photodiode array systems viewing the lower divertor at the last closed flux surface （LCFS）. It is revealed that the typical magnetic surface-averaged neutral density at LCFS is about 3.5×10^16 m^-3 .
基金supported by the National Magnetic Confinement Fusion Energy Program of China(No.2018YFE0311300).
文摘The dynamical evolution of edge turbulence during a transport bifurcation is explored using a flux-driven nonlinear fluid model with a geometry relevant to the plasma edge region.The simulations show that the self-generated mean shear flows can dramatically modify the phase angle between turbulent fluctuations.The changes in phase differences and amplitudes of edge fluctuations give rise to the modifications of turbulent edge transport.The statistical properties of flux and fluctuations are also investigated before and after edge shear flow generation.
文摘This paper describes a Mach/Langmuir probe array with five pins and six pins, which can measure not only parallel flows and the flow perpendicular to the magnetic field but also the radial and the poloidal electric field E. arid E as well. Experimental measurements of the edge fluctuations, velocities of the toroidal, the poloidal flow and electric field have been carried out on both of SOL and the boundary region of HL-1M for Ohmic, biased H-mode, Lower Hybrid Current Drive (LHCD), Supersonic Molecular Beam Injection (MBI), Multi-shot Pellet Injection (MPI), Neutral Beam Injection (NBI), Ion Cyclotron Resonance Heating (ICRH) and Electric Cyclotron Resonance Heating (ECRH) discharges. The results show that the suppressions of the fluctuations are related to poloidal rotations produced by different discharge modes in the improved particle confinement property, simultaneously the change of the radial and poloidal electric field is generated and becomes more negative at the Tokamak plasma edge, and the sheared poloidal flow is related to the reduction in fluctuation level, and the poloidal velocity is mainly dominated by the E × B drift.
基金Project supported by the National Research Foundation of Korea(2011-0030804)the Korea Research Foundation(KRF2009-0076450)funded by the Korea Government(MEST)
文摘Abstract： An effective approach was conducted for estimating fracture toughness using the crack opening displacement （COD） method for plasma enhanced chemical vapor deposition （PECVD） coating materials. For this evaluation, an elastoplastic analysis was used to estimate critical COD values for single edge notched bending （SENB） specimens. The relationship between fracture toughness （Kic） and critical COD for SENB specimens was obtained. Microstructure of the interface between AleO3-TiO2 composite ceramic coatings and AISI 1045 steel substrates was studied by using scanning electron microscope （SEM）. Chemical compositions were clarified by energy-dispersive X-ray spectroscopy （EDS）. The results show that the interface between of Al203-TiO2 and substrate has mechanical combining. The nanohardness of the coatings can reach 1 200 GPa examined by nanoindentation. The Klc was calculated according to this relationship from critical COD. The bending process produces a significant relationship of COD independent of the axial force applied. Fractographic analysis was conducted to determine the crack length. From the physical analysis of nanoindentation curves, the elastic modulus of 1045/AI2O3-TiO2 is 180 GPa for the 50 μm film. The highest value of fracture toughness for 1045/A1203-TiO2-250 μm is 348 MPa·mv2.
文摘Edge plasma features in typical HL- 1M discharges were presented. Particle confinement and plasma rotation have been investigated in the discharges with lower hybrid current drive (LHCD), molecular beam injection (MBI) and pellet fuelling. LHCD can make particle confinement increase a factor of 2-3 for low-density discharge. Particle confinement time and poloidal rotation can be at least doubled after pellet injection, while MBI can make confinement time increase about one order of magnitude with higher performance.
基金supported by the National Magnetic Confinement Fusion Energy R&D Program of China (Nos.2018YFE0301104 and 2018YFE0309100)National Natural Science Foundation of China (No. 51821005).
文摘High-density experiments in the high-field-side mid-plane single-null divertor configuration have been performed for the first time on J-TEXT.The experiments show an increase in the highest central channel line-averaged density from 2.73×10^(19)m^(-3) to 6.49×10^(19)m^(-3),while the X-point moves away from the target by increasing the divertor coil current.The corresponding Greenwald fraction rises from 0.50 to 0.79.For the impurity transport,the density normalized radiation intensity(absolute extreme ultraviolet and soft x-ray)of the central channel density decreased significantly(>50%)with an increase in the plasma density.To better understand the underlying physics mechanisms,the 3 D edge Monte Carlo code coupled with EIRENE(EMC3-EIRENE)has been implemented for the first time on J-TEXT.The simulation results show good agreement with the experimental findings.As the X-point moves away from the target,the divertor power decay length drops and the scrape-off layer impurity screening effect is enhanced.
