Unsteady cavitating flow is extremely complicated and brings more serious damages and unignorable problems compared with steady cavitating flow.CFD has become a practical way to model cavitation;however,the popularly ...Unsteady cavitating flow is extremely complicated and brings more serious damages and unignorable problems compared with steady cavitating flow.CFD has become a practical way to model cavitation;however,the popularly used full cavitation model cannot reflect the pressure-change that the bubble experiences during its life path in the highly unsteady flow like cloud cavitating.Thus a dynamic cavitation model(DCM)is proposed and it has been considered to have not only the first-order pressure effects but also zero-order effect and can provide greater insight into the physical process of bubble producing,developing and collapsing compared to the traditional cavitation model.DCM has already been validated for steady cavitating flow,and the results were reported.Furthermore,DCM is designed and supposed to be more accurate and efficient in modeling unsteady cavitating flow,which is also the purpose of this paper.The basic characteristic of the unsteady cavitating flow,such as the vapor volume fraction distribution and the evolution of pressure amplitude and frequency at different locations of the hydrofoil,are carefully studied to validate DCM.It is found that not only these characteristics mentioned above accord well with the experimental results,but also some detailed transient flow information is depicted,including the re-entrant jet flow that caused the shedding of the cavity,and the phenomenon of two-peak pressure fluctuation in the vicinity of the cavity closure in a cycle.The numerical results validate the capability of DCM for the application of modeling the complicated unsteady cavitating flow.展开更多
Bifurcation problems both for static and dynamical cavitation in a solid sphere composed of the incompressible hyperelasticplastic material, under uniformly distributed tensile boundary dead load were studied. For eac...Bifurcation problems both for static and dynamical cavitation in a solid sphere composed of the incompressible hyperelasticplastic material, under uniformly distributed tensile boundary dead load were studied. For each problem, cavity forms at the center of the sphere when the tensile load is larger than its critical value. Bifurcation curves and the growth curves for the plastic deformation region were given. For static cavitation, the deformation displays three stages, namely, fully elastic, elasto-plastic and fully plastic stages. For dynamical cavitation, the cavity grows without bound and the sphere displays plastic flow.展开更多
Dynamical cavitation and oscillation of an anisotropic two-family fiber-reinforced incompressible hyper-elastic sphere subjected to a suddenly applied constant boundary dead load are examined within the framework of f...Dynamical cavitation and oscillation of an anisotropic two-family fiber-reinforced incompressible hyper-elastic sphere subjected to a suddenly applied constant boundary dead load are examined within the framework of finite elasto-dynamics.An exact differential equation between the radius of the cavity and the applied load is obtained.The curves for the variation of the maximum radius of the cavity with the load and the phase diagrams are obtained by vibration theories and numerical computation.It is shown that there exists a critical value for the applied load.When the applied load is larger than the critical value,a spherical cavity will suddenly form at the center of the sphere.It is proved that the evolution of the cavity radius with time follows that of nonlinear periodic oscillation,and oscillation of the anisotropic sphere is not the same as that of the isotropic sphere.展开更多
The occurrence of time-dependent cavitation and tensile stress in an oscillatory oil squeeze film were investigated experimentally. The test apparatus was a simple thrust bearing consisting of two parallel circular pl...The occurrence of time-dependent cavitation and tensile stress in an oscillatory oil squeeze film were investigated experimentally. The test apparatus was a simple thrust bearing consisting of two parallel circular plates separated by a thin viscous oil film. During the test, one plate was at rest while tne other (transparent) oscillated in a direction normal to its surface. This test configuration was chosen to avoid the rotational motion and complicated geometry of a squeeze film Journal bearing. The frequency of oscillation was in the range of 5 to 50 Hz and was controlled by an electro-magnetic exciter. The process of cavity formation and its subsequent development was recorded by a high-speed video camera. Concomitant pressure in the oil film was measured both within and without the cavitation region. It was found that both tensile stress and cavities existed in a squeeze film under certain working conditions.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.51276157)Zhejiang Provincial Natural Science Foundation(Grant No.LY12E060026)
文摘Unsteady cavitating flow is extremely complicated and brings more serious damages and unignorable problems compared with steady cavitating flow.CFD has become a practical way to model cavitation;however,the popularly used full cavitation model cannot reflect the pressure-change that the bubble experiences during its life path in the highly unsteady flow like cloud cavitating.Thus a dynamic cavitation model(DCM)is proposed and it has been considered to have not only the first-order pressure effects but also zero-order effect and can provide greater insight into the physical process of bubble producing,developing and collapsing compared to the traditional cavitation model.DCM has already been validated for steady cavitating flow,and the results were reported.Furthermore,DCM is designed and supposed to be more accurate and efficient in modeling unsteady cavitating flow,which is also the purpose of this paper.The basic characteristic of the unsteady cavitating flow,such as the vapor volume fraction distribution and the evolution of pressure amplitude and frequency at different locations of the hydrofoil,are carefully studied to validate DCM.It is found that not only these characteristics mentioned above accord well with the experimental results,but also some detailed transient flow information is depicted,including the re-entrant jet flow that caused the shedding of the cavity,and the phenomenon of two-peak pressure fluctuation in the vicinity of the cavity closure in a cycle.The numerical results validate the capability of DCM for the application of modeling the complicated unsteady cavitating flow.
基金Project supported by National Natural Science Foundation of China （Grant Nos. 10402018, 10272069）
文摘Bifurcation problems both for static and dynamical cavitation in a solid sphere composed of the incompressible hyperelasticplastic material, under uniformly distributed tensile boundary dead load were studied. For each problem, cavity forms at the center of the sphere when the tensile load is larger than its critical value. Bifurcation curves and the growth curves for the plastic deformation region were given. For static cavitation, the deformation displays three stages, namely, fully elastic, elasto-plastic and fully plastic stages. For dynamical cavitation, the cavity grows without bound and the sphere displays plastic flow.
基金supported by the National Natural Science Foundation of China (Grant Nos.10772104 and 10872045)the innovation project of Shanghai Municipal Education Commission (Grant No.09YZ12)Shanghai Leading Academic Discipline Project (Grant No.S30106)
文摘Dynamical cavitation and oscillation of an anisotropic two-family fiber-reinforced incompressible hyper-elastic sphere subjected to a suddenly applied constant boundary dead load are examined within the framework of finite elasto-dynamics.An exact differential equation between the radius of the cavity and the applied load is obtained.The curves for the variation of the maximum radius of the cavity with the load and the phase diagrams are obtained by vibration theories and numerical computation.It is shown that there exists a critical value for the applied load.When the applied load is larger than the critical value,a spherical cavity will suddenly form at the center of the sphere.It is proved that the evolution of the cavity radius with time follows that of nonlinear periodic oscillation,and oscillation of the anisotropic sphere is not the same as that of the isotropic sphere.
文摘The occurrence of time-dependent cavitation and tensile stress in an oscillatory oil squeeze film were investigated experimentally. The test apparatus was a simple thrust bearing consisting of two parallel circular plates separated by a thin viscous oil film. During the test, one plate was at rest while tne other (transparent) oscillated in a direction normal to its surface. This test configuration was chosen to avoid the rotational motion and complicated geometry of a squeeze film Journal bearing. The frequency of oscillation was in the range of 5 to 50 Hz and was controlled by an electro-magnetic exciter. The process of cavity formation and its subsequent development was recorded by a high-speed video camera. Concomitant pressure in the oil film was measured both within and without the cavitation region. It was found that both tensile stress and cavities existed in a squeeze film under certain working conditions.
