High electromagnetic shielding performance was achieved in the Mg-9Li-3Al-1Zn alloy processed by accumulative roll bonding(ARB).The microstructure,electromagnetic interference shielding effectiveness(SE) in the freque...High electromagnetic shielding performance was achieved in the Mg-9Li-3Al-1Zn alloy processed by accumulative roll bonding(ARB).The microstructure,electromagnetic interference shielding effectiveness(SE) in the frequency of 30-1500 MHz and mechanical properties of the alloy were investigated.A model based on the shielding of the electromagnetic plane wave was used to theoretically discuss the EMI shielding mechanisms of ARB-processed alloy.Results indicate that the SE of the material increases gradually with the increase in the ARB pass.The enhanced SE can be attributed to the obvious microstructure orientation caused by ARB,and the alternative arrangement of alpha(Mg) phase and beta(Li)phase.In addition,with the increase in ARB pass,the number of interfaces between layers increases and the grain orientation of each layer tends to alignment along c-axis,which is beneficial to the reflection loss and multiple reflection loss of the incident electromagnetic wave.展开更多
The scattering of normally incident water waves by two surface-piercing inclined perforated barriers in water with a uniform finite depth is investigated within the framework of linear water wave theory.Considering th...The scattering of normally incident water waves by two surface-piercing inclined perforated barriers in water with a uniform finite depth is investigated within the framework of linear water wave theory.Considering that thin barriers are zero-thickness,a novel numerical method involving the the coupling of the dual boundary element method(DBEM)with damping layers is applied.In order to effectively damp out the reflected waves,two damping layers,instead of pseudoboundaries are implemented near the two side boundaries of the computational domain.Thus,the modified linearized free surface boundary conditions are formulated and used for solving both the ordinary boundary integral equation as well as the hypersingular boundary integral equation for degenerate boundaries.The newly developed numerical method is validated against analytical methods using the matched eigenfunction expansion method for the special case of two vertical barriers or the inclined angle to the vertical being zero.The influence of the length of the two damping layers has been discussed.Moreover,these findings are also validated against previous results for several cases.After validation,the numerical results for the reflection coefficient,transmission coefficient and dissipation coefficient are obtained by varying the inclination angle and porosity-effect parameter.The effects of both the inclination angle and the porosity on the amplitudes of wave forces acting on both the front and rear barriers are also investigated.It is found that the effect of the inclination angle mainly shifts the location of the extremal values of the reflection and the transmission coefficients.Additionally,a moderate value of the porosity-parameter is quite effective at dissipating wave energy and mitigating the wave loads on dual barriers.展开更多
A general method to realize arbitrary dual-band independent phase control is proposed and demonstrated in this paper.A double-layered C-shape reflective meta-atom is designed to realize independent phase control with ...A general method to realize arbitrary dual-band independent phase control is proposed and demonstrated in this paper.A double-layered C-shape reflective meta-atom is designed to realize independent phase control with high efficiency.As a proof of concept,we propose two functional metasurfaces in the microwave region;the first metasurface performs beam steering in different directions,and the second metasurface generates achromatic beam steering at two distinct frequencies.Both simulation and measurement results agree well with the theoretical pre-setting.The maximum measured efficiency is 88.7%and 92.3%at 6.8 GHz and 8.0 GHz,respectively,for one metasurface,and 91.0%and 89.8%at 6.9 GHz and8.6 GHz,respectively,for the other.展开更多
基金This work was financially supported by the National Natural Science Foundation of China(Nos.51671063,51771060,51871068,51971071)the Domain Foundation of Equipment Advance Research of 13th Five-year Plan(No.61409220118)+1 种基金the Fundamental Research Funds for the Central Universities(No.HEUCFG201834)the Harbin City Application Technology Research and Development Project(No.2017RAQXJ032).
文摘High electromagnetic shielding performance was achieved in the Mg-9Li-3Al-1Zn alloy processed by accumulative roll bonding(ARB).The microstructure,electromagnetic interference shielding effectiveness(SE) in the frequency of 30-1500 MHz and mechanical properties of the alloy were investigated.A model based on the shielding of the electromagnetic plane wave was used to theoretically discuss the EMI shielding mechanisms of ARB-processed alloy.Results indicate that the SE of the material increases gradually with the increase in the ARB pass.The enhanced SE can be attributed to the obvious microstructure orientation caused by ARB,and the alternative arrangement of alpha(Mg) phase and beta(Li)phase.In addition,with the increase in ARB pass,the number of interfaces between layers increases and the grain orientation of each layer tends to alignment along c-axis,which is beneficial to the reflection loss and multiple reflection loss of the incident electromagnetic wave.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.51809209 and 11702244)the Open Fund of Key Laboratory of Water-Sediment Sciences and Water Disaster Prevention of Hunan Province(Grant No.2021SS04).
文摘The scattering of normally incident water waves by two surface-piercing inclined perforated barriers in water with a uniform finite depth is investigated within the framework of linear water wave theory.Considering that thin barriers are zero-thickness,a novel numerical method involving the the coupling of the dual boundary element method(DBEM)with damping layers is applied.In order to effectively damp out the reflected waves,two damping layers,instead of pseudoboundaries are implemented near the two side boundaries of the computational domain.Thus,the modified linearized free surface boundary conditions are formulated and used for solving both the ordinary boundary integral equation as well as the hypersingular boundary integral equation for degenerate boundaries.The newly developed numerical method is validated against analytical methods using the matched eigenfunction expansion method for the special case of two vertical barriers or the inclined angle to the vertical being zero.The influence of the length of the two damping layers has been discussed.Moreover,these findings are also validated against previous results for several cases.After validation,the numerical results for the reflection coefficient,transmission coefficient and dissipation coefficient are obtained by varying the inclination angle and porosity-effect parameter.The effects of both the inclination angle and the porosity on the amplitudes of wave forces acting on both the front and rear barriers are also investigated.It is found that the effect of the inclination angle mainly shifts the location of the extremal values of the reflection and the transmission coefficients.Additionally,a moderate value of the porosity-parameter is quite effective at dissipating wave energy and mitigating the wave loads on dual barriers.
基金the support from National Natural Science Foundation of China(No.61771172)Open Project of Guangxi Key Laboratory of Wireless Wideband Communication and Signal ProcessingNatural Science Foundation of Heilongjiang Province(No.YQ2020F002)。
文摘A general method to realize arbitrary dual-band independent phase control is proposed and demonstrated in this paper.A double-layered C-shape reflective meta-atom is designed to realize independent phase control with high efficiency.As a proof of concept,we propose two functional metasurfaces in the microwave region;the first metasurface performs beam steering in different directions,and the second metasurface generates achromatic beam steering at two distinct frequencies.Both simulation and measurement results agree well with the theoretical pre-setting.The maximum measured efficiency is 88.7%and 92.3%at 6.8 GHz and 8.0 GHz,respectively,for one metasurface,and 91.0%and 89.8%at 6.9 GHz and8.6 GHz,respectively,for the other.
