Wind-induced vibration energy harvesting has a great potential for utilizing wind energy to supply power for low-powered devices.To improve the working performance of energy harvesters effectively,a suitable structura...Wind-induced vibration energy harvesting has a great potential for utilizing wind energy to supply power for low-powered devices.To improve the working performance of energy harvesters effectively,a suitable structural design is crucial.This paper proposes a dual-beam piezo-magneto-elastic wake-induced vibration energy harvesting system to enhance the functional performance of aeroelastic energy harvesters in environments with variable wind speeds.The system contains two piezoelectric beams coupled by magnets(forming upstream and downstream energy harvesters),and each beam is attached with a foam cylinder.A corresponding dynamic model is provided,and output characteristics are obtained at different wind speeds.Results and experimental verification indicate that both upstream and downstream energy harvesters can realize efficient energy harvesting.When the wind speed exceeds a certain critical value,the amplitudes of the system’s displacement and voltage are high.The wind speed threshold value is approximately 1.25 m/s.When the wind speed and magnet spacing are 10.2 m/s and 20 mm,respectively,the output power of the system reaches 4.9×10^(−4)W.Moreover,the wind speed threshold value of the proposed system can be adjusted by an equivalent nonlinear restoring force.展开更多
The alkali-atom density measurement method based on light absorption is highly suitable for a spin-exchange relaxationfree(SERF)atomic magnetometer because of its high-precision measurement and complete nonmagnetic in...The alkali-atom density measurement method based on light absorption is highly suitable for a spin-exchange relaxationfree(SERF)atomic magnetometer because of its high-precision measurement and complete nonmagnetic interference.In this study,the optical rotation angle detection system based on polarization balance detection is utilized to realize the alkali-atom density real-time measurement without affecting magnetic field measurement.We discovered that there exists an optimal frequency detuning of the probe light,which offers the highest sensitivity in alkali-atom density measurement and the lowest susceptibility to temperature fluctuations in terms of the scale factor.In contrast to conventional light absorption measurements based on pump light,this method demonstrated a threefold improvement in alkali-atom density measurement sensitivity while remaining immune to ambient magnetic fields and incident light intensity fluctuations.Furthermore,we utilized this method to achieve closed-loop temperature control with an accuracy of 0.04℃.展开更多
In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduce...In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduced for welding.T2 copper and 6063 aluminum thin plates were lap welded by coaxial dual-beam laser welding.The morphology of weld cross section was compared to explore the influence of process parameters on the formation of lap joints.The microstructure characteristics of the weld zone were observed and compared by optical microscope.The results show that the addition of laser beam swing can eliminate the internal pores of the weld.With the increase of the swing width,the weld depth decreases,and the weld width increases first and then decreases.The influence of welding speed on the weld cross section morphology is similar to that of swing width.With the increase of welding speed,the weld width increases first and then decreases,while the weld depth decreases all the time.This is because that the red laser is used as the main heat source to melt the base metals,with the increase of red laser power,the weld depth increases.As an auxiliary laser source,blue laser reduces the total energy consumption,consequently,the effective heat input increases and the spatter is restrained effectively.As a result,the increase of red laser power has an enhancement effect on the weld width and weld depth.When the swing width is 1.2 mm,the red laser power is 550 W,the blue laser power is 500 W,and the welding speed is 35 mm/s,the weld forming is the best.The lap joint of T2 copper and 6063 aluminum alloy thin plate can be connected stably with the hybrid of blue laser.The effect rules of laser beam swing on the weld formation were obtained,which improved the quality of the joints.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.52161135106)the Science,Technology and Innovation Commission of Shenzhen Municipality(Grant No.JCYJ201908061536-15091)+4 种基金the International Science and Technology Cooperation Project of Guangdong Province(Grant No.2021A0505030012)the Innovation Capability Support Plan of Shaanxi Province(Grant No.2020KJXX-021)the Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(Grant No.CX2022001)the 111 Project(Grant No.BP0719007)supported by the National Science Centre,Poland under the project SHENG-2(Grant No.2021/40/Q/ST8/00362)。
文摘Wind-induced vibration energy harvesting has a great potential for utilizing wind energy to supply power for low-powered devices.To improve the working performance of energy harvesters effectively,a suitable structural design is crucial.This paper proposes a dual-beam piezo-magneto-elastic wake-induced vibration energy harvesting system to enhance the functional performance of aeroelastic energy harvesters in environments with variable wind speeds.The system contains two piezoelectric beams coupled by magnets(forming upstream and downstream energy harvesters),and each beam is attached with a foam cylinder.A corresponding dynamic model is provided,and output characteristics are obtained at different wind speeds.Results and experimental verification indicate that both upstream and downstream energy harvesters can realize efficient energy harvesting.When the wind speed exceeds a certain critical value,the amplitudes of the system’s displacement and voltage are high.The wind speed threshold value is approximately 1.25 m/s.When the wind speed and magnet spacing are 10.2 m/s and 20 mm,respectively,the output power of the system reaches 4.9×10^(−4)W.Moreover,the wind speed threshold value of the proposed system can be adjusted by an equivalent nonlinear restoring force.
文摘The alkali-atom density measurement method based on light absorption is highly suitable for a spin-exchange relaxationfree(SERF)atomic magnetometer because of its high-precision measurement and complete nonmagnetic interference.In this study,the optical rotation angle detection system based on polarization balance detection is utilized to realize the alkali-atom density real-time measurement without affecting magnetic field measurement.We discovered that there exists an optimal frequency detuning of the probe light,which offers the highest sensitivity in alkali-atom density measurement and the lowest susceptibility to temperature fluctuations in terms of the scale factor.In contrast to conventional light absorption measurements based on pump light,this method demonstrated a threefold improvement in alkali-atom density measurement sensitivity while remaining immune to ambient magnetic fields and incident light intensity fluctuations.Furthermore,we utilized this method to achieve closed-loop temperature control with an accuracy of 0.04℃.
基金supported by Guangdong Science and Technology Plan Project(Grant No.20170902,No.20180902)Yangjiang Science and Technology Plan Project(Grant No.SDZX2020063)+1 种基金Shenzhen Key Projects of Innovation and Entrepreneurship Plan Technology(JSGG20210420091802007)Yunfu 2023 Science and Technology Plan Project(S2023020201).
文摘In order to overcome the problems of many pores,large deformation and unstable weld quality of traditional laser welded aluminumcopper alloy joints,a red-blue dual-beam laser source and a swinging laser were introduced for welding.T2 copper and 6063 aluminum thin plates were lap welded by coaxial dual-beam laser welding.The morphology of weld cross section was compared to explore the influence of process parameters on the formation of lap joints.The microstructure characteristics of the weld zone were observed and compared by optical microscope.The results show that the addition of laser beam swing can eliminate the internal pores of the weld.With the increase of the swing width,the weld depth decreases,and the weld width increases first and then decreases.The influence of welding speed on the weld cross section morphology is similar to that of swing width.With the increase of welding speed,the weld width increases first and then decreases,while the weld depth decreases all the time.This is because that the red laser is used as the main heat source to melt the base metals,with the increase of red laser power,the weld depth increases.As an auxiliary laser source,blue laser reduces the total energy consumption,consequently,the effective heat input increases and the spatter is restrained effectively.As a result,the increase of red laser power has an enhancement effect on the weld width and weld depth.When the swing width is 1.2 mm,the red laser power is 550 W,the blue laser power is 500 W,and the welding speed is 35 mm/s,the weld forming is the best.The lap joint of T2 copper and 6063 aluminum alloy thin plate can be connected stably with the hybrid of blue laser.The effect rules of laser beam swing on the weld formation were obtained,which improved the quality of the joints.
