The influences of natural sand, manufactured-sand （MS） and stone-dust （SD） in the manufactured-sand on workability, compressive strength, elastic modulus, drying shrinkage and creep properties of high-strength con...The influences of natural sand, manufactured-sand （MS） and stone-dust （SD） in the manufactured-sand on workability, compressive strength, elastic modulus, drying shrinkage and creep properties of high-strength concrete （HSC） were tested and compared. The results show that the reasonable content （7%-10.5%） of SD in MS will not deteriorate the workability of MS-HSC. It could even improve the workability. Moreover, the compressive strength increases gradually with the increasing SD content,and the MS- HSC with low SD content （smaller than 7%） has the elastic modulus which approaches that of the natural sand HSC, but the elastic modulus reduces when the SD content is high. The influence of the SD content on drying shrinkage performance of MS-HSC is closely related to the hydration age. The shrinkage rate of MS-HSC in the former 7 d age is higher than that of the natural sand HSC, but the difference of the shrinkage rate in the late age is not marked. Meanwhile the shrinkage rate reduces as the fly ash is added; the specific creep and creep coefficient of MS-HSC with 7% SD are close to those of the natural sand HSC.展开更多
Laboratory swelling deformation tests were carried out on compacted GMZ bentonite and bentonite-sand mixtures with 30%and 50%sand contents at 20,40,60,80 and 90°C with infiltration of distilled water.Influence of...Laboratory swelling deformation tests were carried out on compacted GMZ bentonite and bentonite-sand mixtures with 30%and 50%sand contents at 20,40,60,80 and 90°C with infiltration of distilled water.Influence of temperature,initial dry density,and quartz sand content on the swelling deformation characteristic of compacted bentonite specimens was analyzed.Results indicate that the swelling deformation process is accelerated,and the maximum swelling strain increases with the increase in temperature,while the maximum swelling strain tends to be stable with increasing temperature.In the meantime,the temperature effects depend on both of the sand content and the initial dry density of the specimens,the increases of the maximum swelling strain induced by increasing temperature,are enlarged by increasing sand content or initial dry density.Adding of quartz sand to bentonite not only influences the integrality of bentonite specimen,but also increase the microfissuring in area on quartz sand,which are advantageous to the heat transfer,leading to the increase of swelling deformation capacity of the specimen.The increased dry density relatively increases the bentonite content,so the swelling property is enhanced.However,no change on mineral composition of bentonite was observed when temperature was changed from 20 to 90°C.展开更多
基金the National West Communication Construction Technology Project(No.200331881106)
文摘The influences of natural sand, manufactured-sand （MS） and stone-dust （SD） in the manufactured-sand on workability, compressive strength, elastic modulus, drying shrinkage and creep properties of high-strength concrete （HSC） were tested and compared. The results show that the reasonable content （7%-10.5%） of SD in MS will not deteriorate the workability of MS-HSC. It could even improve the workability. Moreover, the compressive strength increases gradually with the increasing SD content,and the MS- HSC with low SD content （smaller than 7%） has the elastic modulus which approaches that of the natural sand HSC, but the elastic modulus reduces when the SD content is high. The influence of the SD content on drying shrinkage performance of MS-HSC is closely related to the hydration age. The shrinkage rate of MS-HSC in the former 7 d age is higher than that of the natural sand HSC, but the difference of the shrinkage rate in the late age is not marked. Meanwhile the shrinkage rate reduces as the fly ash is added; the specific creep and creep coefficient of MS-HSC with 7% SD are close to those of the natural sand HSC.
基金Project (41402260) supported by the National Natural Science Foundation of ChinaProject (20136101120006) supported by the Research Fund for the Doctoral Program of Higher Education,China
文摘Laboratory swelling deformation tests were carried out on compacted GMZ bentonite and bentonite-sand mixtures with 30%and 50%sand contents at 20,40,60,80 and 90°C with infiltration of distilled water.Influence of temperature,initial dry density,and quartz sand content on the swelling deformation characteristic of compacted bentonite specimens was analyzed.Results indicate that the swelling deformation process is accelerated,and the maximum swelling strain increases with the increase in temperature,while the maximum swelling strain tends to be stable with increasing temperature.In the meantime,the temperature effects depend on both of the sand content and the initial dry density of the specimens,the increases of the maximum swelling strain induced by increasing temperature,are enlarged by increasing sand content or initial dry density.Adding of quartz sand to bentonite not only influences the integrality of bentonite specimen,but also increase the microfissuring in area on quartz sand,which are advantageous to the heat transfer,leading to the increase of swelling deformation capacity of the specimen.The increased dry density relatively increases the bentonite content,so the swelling property is enhanced.However,no change on mineral composition of bentonite was observed when temperature was changed from 20 to 90°C.
