The lasing characteristics of composite Tm：YAG rod with undoped ends at room temperature are reported. The maximum output power at 2.015μm is 6.97 W and the slope efficiency is 41.45%. Focusing point and output coup...The lasing characteristics of composite Tm：YAG rod with undoped ends at room temperature are reported. The maximum output power at 2.015μm is 6.97 W and the slope efficiency is 41.45%. Focusing point and output coupler are changed to find the optimization condition. The relationship between operation temperature and output power is discussed. Comparison between Tm：YAG and composite Tm：YAG testifies the superiority of composite crystal.展开更多
A fiber-coupled laser-diode （LD） end-pumped Nd：GdVO4 slab continuous-wave （CW） 912-nm laser and an LD bar end-pumped Nd：GdVO4 slab CW 912-nm laser are both demonstrated in this paper. Using the fiber-coupled LD ...A fiber-coupled laser-diode （LD） end-pumped Nd：GdVO4 slab continuous-wave （CW） 912-nm laser and an LD bar end-pumped Nd：GdVO4 slab CW 912-nm laser are both demonstrated in this paper. Using the fiber-coupled LD of end-pumped type, a highest CW 912-nm laser output power of 10.17 W is obtained with a high optical to-optical conversion efficiency of 24.6% and a slope efficiency of 34.5%. The measured M2 factors of beam quality in x and y directions are 5.3 and 5.1, respectively. Besides, an LD bar of end-pumped type is used to realize CW 912-nm laser output, which has the advantages of compactness and low cost. When the pump power is 38.8 W, the output power is 8.87 W and the measured M^2 factors of beam quality in x and y directions are 16 and 1.31, respectively. In order to improve the beam quality of the 912-nm laser at x direction, a new quasi-concentric laser resonator will be designed, and an LD bar end-pumped Nd：GdVO4 slab high-power CW 912-nm TEM00 laser will be realized in the future.展开更多
A one-dimensional （1D） top-hat, diode-end-pumped, electro-optically Q-switched Nd：YVO4 slab laser is demonstrated. Under the pump power of 175.5 W, 26.3-W output power is obtained with the repetition rate of 5 kHz ...A one-dimensional （1D） top-hat, diode-end-pumped, electro-optically Q-switched Nd：YVO4 slab laser is demonstrated. Under the pump power of 175.5 W, 26.3-W output power is obtained with the repetition rate of 5 kHz and the pulse width of 4.3 ns. The output beam has a good top-hat beam profile in both the near field and the far field.展开更多
An efficient diode-end-pumped actively Q-switched Nd：YLF/SrW04 Raman laser is demonstrated. The fun- damental wave is 1047.0nm and the corresponding first-Stocks wave is 1158.7nm. With a pumping power of 10.5 W, the ...An efficient diode-end-pumped actively Q-switched Nd：YLF/SrW04 Raman laser is demonstrated. The fun- damental wave is 1047.0nm and the corresponding first-Stocks wave is 1158.7nm. With a pumping power of 10.5 W, the average output power of 2.2 W at 1158.7nm is obtained, with the corresponding optical conversion efficiency of 20.9%. At a repetition rate of 6 kHz, the pulse width of the Raman laser is 8. 7ns and the peak power is calculated to be 42.1 kW. The beam quality factors M2 in horizontal and vertical directions are 1.3 and 1.5, respectively.展开更多
文摘The lasing characteristics of composite Tm：YAG rod with undoped ends at room temperature are reported. The maximum output power at 2.015μm is 6.97 W and the slope efficiency is 41.45%. Focusing point and output coupler are changed to find the optimization condition. The relationship between operation temperature and output power is discussed. Comparison between Tm：YAG and composite Tm：YAG testifies the superiority of composite crystal.
文摘A fiber-coupled laser-diode （LD） end-pumped Nd：GdVO4 slab continuous-wave （CW） 912-nm laser and an LD bar end-pumped Nd：GdVO4 slab CW 912-nm laser are both demonstrated in this paper. Using the fiber-coupled LD of end-pumped type, a highest CW 912-nm laser output power of 10.17 W is obtained with a high optical to-optical conversion efficiency of 24.6% and a slope efficiency of 34.5%. The measured M2 factors of beam quality in x and y directions are 5.3 and 5.1, respectively. Besides, an LD bar of end-pumped type is used to realize CW 912-nm laser output, which has the advantages of compactness and low cost. When the pump power is 38.8 W, the output power is 8.87 W and the measured M^2 factors of beam quality in x and y directions are 16 and 1.31, respectively. In order to improve the beam quality of the 912-nm laser at x direction, a new quasi-concentric laser resonator will be designed, and an LD bar end-pumped Nd：GdVO4 slab high-power CW 912-nm TEM00 laser will be realized in the future.
文摘A one-dimensional （1D） top-hat, diode-end-pumped, electro-optically Q-switched Nd：YVO4 slab laser is demonstrated. Under the pump power of 175.5 W, 26.3-W output power is obtained with the repetition rate of 5 kHz and the pulse width of 4.3 ns. The output beam has a good top-hat beam profile in both the near field and the far field.
基金Supported by the National Natural Science Foundation of China under Grant Nos 11204160,61378032 and 61211120196the Shandong Province Science and Technology Research Projects under Grant No 2010GGX10137
文摘An efficient diode-end-pumped actively Q-switched Nd：YLF/SrW04 Raman laser is demonstrated. The fun- damental wave is 1047.0nm and the corresponding first-Stocks wave is 1158.7nm. With a pumping power of 10.5 W, the average output power of 2.2 W at 1158.7nm is obtained, with the corresponding optical conversion efficiency of 20.9%. At a repetition rate of 6 kHz, the pulse width of the Raman laser is 8. 7ns and the peak power is calculated to be 42.1 kW. The beam quality factors M2 in horizontal and vertical directions are 1.3 and 1.5, respectively.
