Froude similitude and friction similitude are the two crucial similarity conditions that are often used in physical-scale modeling of rivers.However,models often deviate from Froude similitude when dealing with real-w...Froude similitude and friction similitude are the two crucial similarity conditions that are often used in physical-scale modeling of rivers.However,models often deviate from Froude similitude when dealing with real-world situations.This study developed several fixed-bed river models with various curvatures to determine the effect of Froude similitude deviation on curved channel modeling.Models were constructed according to the characteristics of the Middle Yangtze River.Differences in longitudinal slope,transverse slope,and main stream line location were measured by varying Froude similitude deviation.The deviations of longitudinal slope and velocity were negligible because friction similitude was accounted for.The transverse slope varied significantly with the Froude similitude deviation,and the main stream line varied with the curvature and Froude similitude deviation.Formulae were derived to estimate the slope deviation.These analyses helped to clarify the feasibility of the method of Froude similitude deviation for curved channels.展开更多
Three dimensional geophysical models were abstracted and established according to characteristics of oil and gas reservoir.Then direct current fields for different models were simulated with finite element software(fi...Three dimensional geophysical models were abstracted and established according to characteristics of oil and gas reservoir.Then direct current fields for different models were simulated with finite element software(finite element program generator) by hole-to-surface resistivity method.Numerical solution was compared with analytical one for the homogeneity earth model.And a new parameter of deviation rate was proposed by analyzing different plot curves.The results show that the relative error of solution for homogeneity earth model may attain to 0.043%.And deviation rate decreases from 18% to 1% and its anomaly range becomes wide gradually when the depth of oil and gas reservoir increases from 200 to 1 500 m.If resistivity ratio of oil and gas reservoir to sur-rounding rock decreases from 100 to 10 for the resistive oil and gas reservoir,the amplitude attenuation of deviation rate nearly reaches 8%.When there exists stratum above oil and gas reservoir,and influence of resistive stratum may be eliminated or weakened and anomaly of oil and gas reservoir can be strengthened.展开更多
The Earth’s surface roughness constitutes an important parameter in terrain analysis for studying different environmental and engineering problems. Authors gave different definitions and measures for the earth’s sur...The Earth’s surface roughness constitutes an important parameter in terrain analysis for studying different environmental and engineering problems. Authors gave different definitions and measures for the earth’s surface roughness that usually depend on exploitation of digital elevation data for its reliable determination. This research aimed at exploring the different approaches for defining and extraction of the Earth’s surface roughness from Airborne LiDAR Measurements. It also aimed at evaluating the effects of the window size of the standard deviation filter on the created roughness maps in downtown landscapes using three known approaches namely;standard deviation filtering of the Digital Elevation Model (DEM), standard deviation filtering of the slope gradient model and standard deviation filtering of the profile curvature model. In this context, different roughness maps have been created from Airborne LiDAR measurements of the City of Toronto, Canada using the three filtering approaches with varying window sizes. Visual analysis has shown color tones of small roughness values with smooth textures dominate the roughness maps from small window sizes of the standard deviation filter, however, increasing the window sizes has produced wider variations of the color tones and rougher texture roughness maps. The standard deviations and ranges of the roughness maps from LiDAR DEM have increased due to increasing the filter window size while the skewness and kurtosis have decreased due to increasing the window size, indicating that the roughness maps from larger window sizes are statistically more symmetrical and more consistent. Thus, kurtosis has decreased by 53% and 82% due to increasing the window size to 7 × 7 and 15 × 15 respectively. The standard deviations of the roughness maps from the slope gradient model have increased due to increasing the window size till 15 × 15 while they have decreased with more increases. However, skewness has decreased due to increasing the window size till 15 × 15 and the展开更多
Described in this paper is an experiment on atmosphere-surface turbulent exchange and boundary layer turbulence properties conducted in July 1994 over the Kerqin Grassland,Jilin, China.The characteristics of the turbu...Described in this paper is an experiment on atmosphere-surface turbulent exchange and boundary layer turbulence properties conducted in July 1994 over the Kerqin Grassland,Jilin, China.The characteristics of the turbulent spectrum,and the relationships of the standard deviation of the turbulent velocity components and sensible heat flux with the atmospheric stability are studied using data from a sonic anemometer and a fast-response platinum resistance thermometer mounted on a 100 m tower.The results show that in the surface layer over a flat, uniform and open grassland,for a broad stability range(-22.12≤Z_L≤17.98),the velocity spectra obey the-2/3 power law in the inertial subrange,and 1 power law at low frequencies. Under near neutral stratification,σ_u/u_*=1.20,σ_v/u_*=1.23 and σ_w/u_*=1.02.For Z_i/L≤ -0.2,the standard deviations of the turbulent velocity components follow a 1/3 power law.For Z_i/L≤-0.1,the standard deviation of the temperature fluctuations follows a-1/3 power law, and as Z_i/L≤-0.08,it exhibits nonlinear behavior.Sensible heat flux is well correlated to the stability parameter.展开更多
基金supported by the Project of Subsequent Work of the Three Gorges Project(Grant No.SXHXGZ-2020-3).
文摘Froude similitude and friction similitude are the two crucial similarity conditions that are often used in physical-scale modeling of rivers.However,models often deviate from Froude similitude when dealing with real-world situations.This study developed several fixed-bed river models with various curvatures to determine the effect of Froude similitude deviation on curved channel modeling.Models were constructed according to the characteristics of the Middle Yangtze River.Differences in longitudinal slope,transverse slope,and main stream line location were measured by varying Froude similitude deviation.The deviations of longitudinal slope and velocity were negligible because friction similitude was accounted for.The transverse slope varied significantly with the Froude similitude deviation,and the main stream line varied with the curvature and Froude similitude deviation.Formulae were derived to estimate the slope deviation.These analyses helped to clarify the feasibility of the method of Froude similitude deviation for curved channels.
基金Projects(2006AA06Z105,2007AA06Z134) supported by the National High-Tech Research and Development Program of China
文摘Three dimensional geophysical models were abstracted and established according to characteristics of oil and gas reservoir.Then direct current fields for different models were simulated with finite element software(finite element program generator) by hole-to-surface resistivity method.Numerical solution was compared with analytical one for the homogeneity earth model.And a new parameter of deviation rate was proposed by analyzing different plot curves.The results show that the relative error of solution for homogeneity earth model may attain to 0.043%.And deviation rate decreases from 18% to 1% and its anomaly range becomes wide gradually when the depth of oil and gas reservoir increases from 200 to 1 500 m.If resistivity ratio of oil and gas reservoir to sur-rounding rock decreases from 100 to 10 for the resistive oil and gas reservoir,the amplitude attenuation of deviation rate nearly reaches 8%.When there exists stratum above oil and gas reservoir,and influence of resistive stratum may be eliminated or weakened and anomaly of oil and gas reservoir can be strengthened.
文摘The Earth’s surface roughness constitutes an important parameter in terrain analysis for studying different environmental and engineering problems. Authors gave different definitions and measures for the earth’s surface roughness that usually depend on exploitation of digital elevation data for its reliable determination. This research aimed at exploring the different approaches for defining and extraction of the Earth’s surface roughness from Airborne LiDAR Measurements. It also aimed at evaluating the effects of the window size of the standard deviation filter on the created roughness maps in downtown landscapes using three known approaches namely;standard deviation filtering of the Digital Elevation Model (DEM), standard deviation filtering of the slope gradient model and standard deviation filtering of the profile curvature model. In this context, different roughness maps have been created from Airborne LiDAR measurements of the City of Toronto, Canada using the three filtering approaches with varying window sizes. Visual analysis has shown color tones of small roughness values with smooth textures dominate the roughness maps from small window sizes of the standard deviation filter, however, increasing the window sizes has produced wider variations of the color tones and rougher texture roughness maps. The standard deviations and ranges of the roughness maps from LiDAR DEM have increased due to increasing the filter window size while the skewness and kurtosis have decreased due to increasing the window size, indicating that the roughness maps from larger window sizes are statistically more symmetrical and more consistent. Thus, kurtosis has decreased by 53% and 82% due to increasing the window size to 7 × 7 and 15 × 15 respectively. The standard deviations of the roughness maps from the slope gradient model have increased due to increasing the window size till 15 × 15 while they have decreased with more increases. However, skewness has decreased due to increasing the window size till 15 × 15 and the
基金the State Key Laboratory of Atmosphere Physics and Chemistry,Institute of Atmospheric Physics,Chinese Academy of Sciences.
文摘Described in this paper is an experiment on atmosphere-surface turbulent exchange and boundary layer turbulence properties conducted in July 1994 over the Kerqin Grassland,Jilin, China.The characteristics of the turbulent spectrum,and the relationships of the standard deviation of the turbulent velocity components and sensible heat flux with the atmospheric stability are studied using data from a sonic anemometer and a fast-response platinum resistance thermometer mounted on a 100 m tower.The results show that in the surface layer over a flat, uniform and open grassland,for a broad stability range(-22.12≤Z_L≤17.98),the velocity spectra obey the-2/3 power law in the inertial subrange,and 1 power law at low frequencies. Under near neutral stratification,σ_u/u_*=1.20,σ_v/u_*=1.23 and σ_w/u_*=1.02.For Z_i/L≤ -0.2,the standard deviations of the turbulent velocity components follow a 1/3 power law.For Z_i/L≤-0.1,the standard deviation of the temperature fluctuations follows a-1/3 power law, and as Z_i/L≤-0.08,it exhibits nonlinear behavior.Sensible heat flux is well correlated to the stability parameter.
