The triboelectric nanogenerator （TENG） has emerged as a new and effective mechanical energy harvesting technology. In this work, a theoretical model for a rotary-sliding disk TENG with grating structure was construc...The triboelectric nanogenerator （TENG） has emerged as a new and effective mechanical energy harvesting technology. In this work, a theoretical model for a rotary-sliding disk TENG with grating structure was constructed, including the dielectric-to-dielectric and conductor-to-dielectric cases. The finite element method （FEM） was utilized to characterize the fundamental physics of the rotary- sliding disk TENG working in both contact and non-contact modes. The basic properties of disk TENG were found to be controlled by the structural parameters such as tribo-surface spacing, grating number, and geometric size. From the FEM calculations, an approximate V-Q-a relationship was built through the inter- polation method, and then the TENG dynamic output characteristics with arbitrary load resistance were numerically calculated. Finall~ the dependencies of output power and matched resistance on the structural parameters and rotation rate were revealed. The present work provides an in-depth understanding of the working principle of the rotary-sliding disk TENG and serves as important guidance for optimizing TENG output performance in specific applications.展开更多
A reduced state Soft Input Soft Output (SISO) a posteriori probability algorithm for Seri-ally Concatenated Continuous Phase Modulation (SCCPM) is proposed in this paper. Based on the Reduced State Sequence Detection ...A reduced state Soft Input Soft Output (SISO) a posteriori probability algorithm for Seri-ally Concatenated Continuous Phase Modulation (SCCPM) is proposed in this paper. Based on the Reduced State Sequence Detection (RSSD),it has more general form compared with other reduced state SISO algorithms. The proposed algorithm can greatly reduce the state number,thus leads to the computation complexity reduction. It also minimizes the degradation in Euclidean distance with decision feedback in the reduced state trellis. Analysis and simulation results show that the perform-ance degradation is little with proper reduction scheme.展开更多
An on-board charger for efficiently charging multiple battery-operated electric vehicles(EVs)is introduced.It has evolved as a single-input dual-output(SIDO)integrated boost-single ended primary inductor converter(SEP...An on-board charger for efficiently charging multiple battery-operated electric vehicles(EVs)is introduced.It has evolved as a single-input dual-output(SIDO)integrated boost-single ended primary inductor converter(SEPIC)fly-back converter,offering cost-effectiveness,reliability,and higher efficiency compared to conventional chargers with equivalent specifications.The proposed system includes an additional regulated output terminal,in addition to an existing terminal for charging the EV battery of a 4-wheeler,which can be used to charge another EV battery,preferably a 2-wheeler.With the aid of control techniques,unity power factor operations are obtained during constant-voltage(CV)/constant-current(CC)charging for the grid-to-vehicle(G2V)operating mode.Using mathematical modelling analysis,the proposed system is developed in a Matlab/Simulink environment,and the results are validated in a real-time simulator using dSPACE-1104.The proposed system is employed for charging the batteries of two EVs with capacities of 400 V,40 A·h and 48 V,52 A·h for the 4-wheeler and 2-wheeler,respectively.Its performance is investigated under different operating modes and over a wide range of supply voltage variations to ensure safe and reliable operation of the charger.展开更多
An improved switched-capacitor bandgap reference with a continuous output voltage of 1.26 V has been implemented with Chartered 0.35-μm 5-V CMOS process. The output offset voltage, induced by non-ideal characteristic...An improved switched-capacitor bandgap reference with a continuous output voltage of 1.26 V has been implemented with Chartered 0.35-μm 5-V CMOS process. The output offset voltage, induced by non-ideal characteristics of operational amplifier and bias current generator, is suppressed by the proposed sample-and-hold circuit and self-bias technique. Experimental results show that the proposed circuit operates properly under a supply voltage varying from 3 to 5 V. The measured temperature coefficient is 112 ppm/℃ and the power supply rejection ratio of output voltage without any filtering capacitor is -40 dB and -33 dB at 100 Hz and 10 MHz, respectively.展开更多
We present a continuous-wave singly-resonant optical parametric oscillator with 1.5% output coupling of the reso- nant signal wave, based on an angle-polished MgO-doped periodically poled lithium niobate （MgO：PPLN）...We present a continuous-wave singly-resonant optical parametric oscillator with 1.5% output coupling of the reso- nant signal wave, based on an angle-polished MgO-doped periodically poled lithium niobate （MgO：PPLN）, pumped by a commercial Nd：YVO4 laser at 1064 nm. The output-coupled optical parametric oscillator delivers a maximum total output power of 4.19 W with 42.8% extraction efficiency, across a tuning range of 1717 nm in the near- and mid-infrared region. This indicates improvements of 1.87 W in output power, 19.1% in extraction efficiency and 213 nm in tuning range exten- sion in comparison with the optical parametric oscillator with no output coupling, while at the expense of increasing the oscillation threshold by a factor of - 2. Moreover, it is confirmed that the finite output coupling also contributes to the reduction of the thermal effects in crystal.展开更多
基金Supports from the ＂thousands talents＂ program for the pioneer researcher and his innovation team, China, the Beijing Municipal Science ＆ Technology Commission （Nos. Z131100006013004 and Z131100006013005）, and National Natural Science Foundation of China （No. 61405131） are appreciated.
文摘The triboelectric nanogenerator （TENG） has emerged as a new and effective mechanical energy harvesting technology. In this work, a theoretical model for a rotary-sliding disk TENG with grating structure was constructed, including the dielectric-to-dielectric and conductor-to-dielectric cases. The finite element method （FEM） was utilized to characterize the fundamental physics of the rotary- sliding disk TENG working in both contact and non-contact modes. The basic properties of disk TENG were found to be controlled by the structural parameters such as tribo-surface spacing, grating number, and geometric size. From the FEM calculations, an approximate V-Q-a relationship was built through the inter- polation method, and then the TENG dynamic output characteristics with arbitrary load resistance were numerically calculated. Finall~ the dependencies of output power and matched resistance on the structural parameters and rotation rate were revealed. The present work provides an in-depth understanding of the working principle of the rotary-sliding disk TENG and serves as important guidance for optimizing TENG output performance in specific applications.
基金Supported by NSFC & Microsoft Asia (60372048)China TRAPOYT, NSFC key project (60496316)+2 种基金863 Project (2005AA123910)RFDP (20050701007)MOE Key Project (104171).
文摘A reduced state Soft Input Soft Output (SISO) a posteriori probability algorithm for Seri-ally Concatenated Continuous Phase Modulation (SCCPM) is proposed in this paper. Based on the Reduced State Sequence Detection (RSSD),it has more general form compared with other reduced state SISO algorithms. The proposed algorithm can greatly reduce the state number,thus leads to the computation complexity reduction. It also minimizes the degradation in Euclidean distance with decision feedback in the reduced state trellis. Analysis and simulation results show that the perform-ance degradation is little with proper reduction scheme.
文摘An on-board charger for efficiently charging multiple battery-operated electric vehicles(EVs)is introduced.It has evolved as a single-input dual-output(SIDO)integrated boost-single ended primary inductor converter(SEPIC)fly-back converter,offering cost-effectiveness,reliability,and higher efficiency compared to conventional chargers with equivalent specifications.The proposed system includes an additional regulated output terminal,in addition to an existing terminal for charging the EV battery of a 4-wheeler,which can be used to charge another EV battery,preferably a 2-wheeler.With the aid of control techniques,unity power factor operations are obtained during constant-voltage(CV)/constant-current(CC)charging for the grid-to-vehicle(G2V)operating mode.Using mathematical modelling analysis,the proposed system is developed in a Matlab/Simulink environment,and the results are validated in a real-time simulator using dSPACE-1104.The proposed system is employed for charging the batteries of two EVs with capacities of 400 V,40 A·h and 48 V,52 A·h for the 4-wheeler and 2-wheeler,respectively.Its performance is investigated under different operating modes and over a wide range of supply voltage variations to ensure safe and reliable operation of the charger.
基金supported by the National Natural Science Foundation of China(No.60676013)
文摘An improved switched-capacitor bandgap reference with a continuous output voltage of 1.26 V has been implemented with Chartered 0.35-μm 5-V CMOS process. The output offset voltage, induced by non-ideal characteristics of operational amplifier and bias current generator, is suppressed by the proposed sample-and-hold circuit and self-bias technique. Experimental results show that the proposed circuit operates properly under a supply voltage varying from 3 to 5 V. The measured temperature coefficient is 112 ppm/℃ and the power supply rejection ratio of output voltage without any filtering capacitor is -40 dB and -33 dB at 100 Hz and 10 MHz, respectively.
基金supported by the National Natural Science Foundation of China(Grant Nos.61308056,11204044,11232015,and 11072271)the Research Fund for the Doctoral Program of Higher Education of China(Grant Nos.20120171110005 and 20130171130003)+1 种基金the Fundamental Research Funds for the Central Universities of China(Grant No.14lgpy07)the Opening Project of Science and Technology on Reliability Physics and Application Technology of Electronic Component Laboratory,China(Grant No.ZHD201203)
文摘We present a continuous-wave singly-resonant optical parametric oscillator with 1.5% output coupling of the reso- nant signal wave, based on an angle-polished MgO-doped periodically poled lithium niobate （MgO：PPLN）, pumped by a commercial Nd：YVO4 laser at 1064 nm. The output-coupled optical parametric oscillator delivers a maximum total output power of 4.19 W with 42.8% extraction efficiency, across a tuning range of 1717 nm in the near- and mid-infrared region. This indicates improvements of 1.87 W in output power, 19.1% in extraction efficiency and 213 nm in tuning range exten- sion in comparison with the optical parametric oscillator with no output coupling, while at the expense of increasing the oscillation threshold by a factor of - 2. Moreover, it is confirmed that the finite output coupling also contributes to the reduction of the thermal effects in crystal.
