During the thin strip coiling process, it is necessary to use a sleeve with a mandrel to prevent excessive deformation of the strip. Stress distribution in the sleeve and in the strip is an important factor that deter...During the thin strip coiling process, it is necessary to use a sleeve with a mandrel to prevent excessive deformation of the strip. Stress distribution in the sleeve and in the strip is an important factor that determines the quality of the coil. However, owing to the accumulation of high pressure, it is difficult to determine the stress distribution through experimentation. Thus, stress analysis of the strip coiling process was conducted. Finite element analysis was used to investigate the effects of the weight of the strip and the mandrel on the stress distribution and stress concentration near the starting point of the coil. The radial stress was predicted for a coil with a stacked thickness of 384 mm, which corresponds to a strip length of 1486 m, using the stress analysis model developed in a preceding research. A method was presented to reduce the weight and radial stress of a strip coil. It was found that the deformation of the sleeve can be reduced by decreasing the gap between the mandrel segments. The thickness of the sleeve can be reduced from 120 to 106 mm using the stress analysis results. Furthermore, coiling tension can be reduced by 44% compared to the existing value considering the interlayer slip of the strip coil.展开更多
文摘During the thin strip coiling process, it is necessary to use a sleeve with a mandrel to prevent excessive deformation of the strip. Stress distribution in the sleeve and in the strip is an important factor that determines the quality of the coil. However, owing to the accumulation of high pressure, it is difficult to determine the stress distribution through experimentation. Thus, stress analysis of the strip coiling process was conducted. Finite element analysis was used to investigate the effects of the weight of the strip and the mandrel on the stress distribution and stress concentration near the starting point of the coil. The radial stress was predicted for a coil with a stacked thickness of 384 mm, which corresponds to a strip length of 1486 m, using the stress analysis model developed in a preceding research. A method was presented to reduce the weight and radial stress of a strip coil. It was found that the deformation of the sleeve can be reduced by decreasing the gap between the mandrel segments. The thickness of the sleeve can be reduced from 120 to 106 mm using the stress analysis results. Furthermore, coiling tension can be reduced by 44% compared to the existing value considering the interlayer slip of the strip coil.
