Interface debonding between particle and matrix in composite propellant influences its macroscopic mechanical properties greatly. For this, the laws of interface cohesive damage and failure were analyzed. Then, its mi...Interface debonding between particle and matrix in composite propellant influences its macroscopic mechanical properties greatly. For this, the laws of interface cohesive damage and failure were analyzed. Then, its microscopic computational model was established. The interface mechanical response was modeled by the bilinear cohesive zone model. The effects of interface properties and particle sizes on the macroscopic mechanical behavior were investigated. Numerical simulation of debonding damage evolution of composite propellant under finite deformation was carried out. The debonding damage nucleation, propagation mechanism and non-uniform distribution of microscopic stress-strain fields were discussed. The results show that the finite element simulation method based on microstructure model can effectively predict the trend of macroscopic mechanical behavior and particle/matrix debonding evolution process. It can be used for damage simulation and failure assessment of composite propellants.展开更多
The mechanical properties and fracturing mechanism of shale containing beddings are critically important in shale gas exploitation and wellbore stability.To investigate the effects of shale bedding on crack behavior a...The mechanical properties and fracturing mechanism of shale containing beddings are critically important in shale gas exploitation and wellbore stability.To investigate the effects of shale bedding on crack behavior and fracturing mechanism,scanning electron microscope(SEM)with a loading system was employed to carry out three-point bending tests on Longmaxi outcrop shale.The crack initiation and propagation of Longmaxi shale were observed and recorded by taking photos during loading.The cracking paths were extracted to calculate the crack length through a MATLAB program.The peak load,fracture toughness and fracture energy all increase with the bedding angle from 0°to 90°.The crack length and energy were also found to increase with the bedding angle in the range of 0°-600 and then drop slightly.The fracturing mechanism of shale includes the main crack affected by the bedding angle and disturbed by randomly distributed particles.The main cracking path was accompanied by several microcrack branches which could form an interconnected crack system.When the main crack encounters larger sedimentary particles,it will deflect around the particles and then restore to the initial direction.A numerical technique using extended finite element method(XFEM)coupled with anisotropic cohesive damage criteria was developed,which is able to capture the dependence of crack propagations on bedding angle and sedimentary particles.This study sheds light on understanding and predicting mesoscale fracture behavior of shale with different bedding angles.展开更多
Mimicking the natural design motifs of structural biological materials is a promising approach to achieve a unique combination of strength and toughness for engineering materials.In this study,we proposed a 2D computa...Mimicking the natural design motifs of structural biological materials is a promising approach to achieve a unique combination of strength and toughness for engineering materials.In this study,we proposed a 2D computational model,which is a two-hierarchy hybrid composite inspired by the ultrastructural features of bone.The model is composed of alternating parallel array of two subunits(A&B)mimicking‘mineralized collagen fibril’and‘extrafibrillar matrix’of bone at ultrastructural level.The subunit-A is formed by short stiff platelets embedded within a soft matrix.The subunit-B consists of randomly distributed stiff grains bonded by a thin layer of tough adhesive phase.To assess the performance of the bioinspired design,a conventional unidirectional long-fiber composite made with the same amount of hard and soft phases was studied.The finite element simulation results indicated that the toughness,strength and elastic modulus of the bioinspired composite was 312%,83%,and 55%of that of the conventional composite,respectively.The toughness improvement was attributed to the prevalent energy-dissipating damage of adhesive phase in subunit-B and crack-bridging by subunit-A,the two major toughening mechanisms in the model.This study exemplifies some insights into natural design of materials to gain better material performance.展开更多
The interface of slab track laid in cold regions is prone to debonding under the coupling of freeze-thaw cyclesand temperature loads.Based on the composite specimen tests,the parameters of cohesive zone model were obt...The interface of slab track laid in cold regions is prone to debonding under the coupling of freeze-thaw cyclesand temperature loads.Based on the composite specimen tests,the parameters of cohesive zone model were obtained andused in a simulation model of CRTS III prefabricated slab track to study the interlayer damage.The results show that 1)the digital image correlation(DIC)technique can accurately capture the strain field changes on the interface of compositespecimens under splitting and shear loading;2)when the temperature gradient is−40℃/m−60℃/m,the interfacedamage of the slab track is minimal and presents different patterns of expansion under positive and negative temperaturegradients,each corresponding to damage of the cohesive element dominated by shear stress and normal tensile stress,respectively;3)the reduction of the elastic modulus at the concrete base after freeze-thaw inhibits interface damage andleads to a higher starting temperature gradient load,but cracking can occur on the concrete base after 150 freeze-thaws.For this reason,in the light of damage control of both the interface and concrete base,the elastic modulus of the concretebase is 54%or over that without freeze-thaw cycles.展开更多
The cohesive zone model(CZM)has been used widely and successfully in fracture propagation,but some basic problems are still to be solved.In this paper,artificial compliance and discontinuous force in CZM are investiga...The cohesive zone model(CZM)has been used widely and successfully in fracture propagation,but some basic problems are still to be solved.In this paper,artificial compliance and discontinuous force in CZM are investigated.First,theories about the cohesive element(local coordinate system,stiffness matrix,and internal nodal force)are presented.The local coordinate system is defined to obtain local separation;the stiffness matrix for an eight-node cohesive element is derived from the calculation of strain energy;internal nodal force between the cohesive element and bulk element is obtained from the principle of virtual work.Second,the reason for artificial compliance is explained by the effective stiffnesses of zero-thickness and finite-thickness cohesive elements.Based on the effective stiffness,artificial compliance can be completely removed by adjusting the stiffness of the finite-thickness cohesive element.This conclusion is verified from 1D and 3D simulations.Third,three damage evolution methods(monotonically increasing effective separation,damage factor,and both effective separation and damage factor)are analyzed.Under constant unloading and reloading conditions,the monotonically increasing damage factor method without discontinuous force and healing effect is a better choice than the other two methods.The proposed improvements are coded in LS-DYNA user-defined material,and a drop weight tear test verifies the improvements.展开更多
基金Sponsored by the General Armament Department Advanced Research Project (20101019)
文摘Interface debonding between particle and matrix in composite propellant influences its macroscopic mechanical properties greatly. For this, the laws of interface cohesive damage and failure were analyzed. Then, its microscopic computational model was established. The interface mechanical response was modeled by the bilinear cohesive zone model. The effects of interface properties and particle sizes on the macroscopic mechanical behavior were investigated. Numerical simulation of debonding damage evolution of composite propellant under finite deformation was carried out. The debonding damage nucleation, propagation mechanism and non-uniform distribution of microscopic stress-strain fields were discussed. The results show that the finite element simulation method based on microstructure model can effectively predict the trend of macroscopic mechanical behavior and particle/matrix debonding evolution process. It can be used for damage simulation and failure assessment of composite propellants.
基金financially supported by National Natural Science Foundation of China(grant No.41877257)Beijing OutstandingYoung Scientist Program(Grant No.BJJWZYJH01201911413037)+1 种基金Shaanxi Coal Group Key Project(Grant No.2018SMHKJA-J-03)Yueqi outstanding scholar Award Program by China University of Mining and Technology(Beijing),China。
文摘The mechanical properties and fracturing mechanism of shale containing beddings are critically important in shale gas exploitation and wellbore stability.To investigate the effects of shale bedding on crack behavior and fracturing mechanism,scanning electron microscope(SEM)with a loading system was employed to carry out three-point bending tests on Longmaxi outcrop shale.The crack initiation and propagation of Longmaxi shale were observed and recorded by taking photos during loading.The cracking paths were extracted to calculate the crack length through a MATLAB program.The peak load,fracture toughness and fracture energy all increase with the bedding angle from 0°to 90°.The crack length and energy were also found to increase with the bedding angle in the range of 0°-600 and then drop slightly.The fracturing mechanism of shale includes the main crack affected by the bedding angle and disturbed by randomly distributed particles.The main cracking path was accompanied by several microcrack branches which could form an interconnected crack system.When the main crack encounters larger sedimentary particles,it will deflect around the particles and then restore to the initial direction.A numerical technique using extended finite element method(XFEM)coupled with anisotropic cohesive damage criteria was developed,which is able to capture the dependence of crack propagations on bedding angle and sedimentary particles.This study sheds light on understanding and predicting mesoscale fracture behavior of shale with different bedding angles.
基金This research was supported by a grant from National Science Foundation(CMMI-1538448)a grant from the University of Texas at San Antonio,Office of the Vice President for Research.
文摘Mimicking the natural design motifs of structural biological materials is a promising approach to achieve a unique combination of strength and toughness for engineering materials.In this study,we proposed a 2D computational model,which is a two-hierarchy hybrid composite inspired by the ultrastructural features of bone.The model is composed of alternating parallel array of two subunits(A&B)mimicking‘mineralized collagen fibril’and‘extrafibrillar matrix’of bone at ultrastructural level.The subunit-A is formed by short stiff platelets embedded within a soft matrix.The subunit-B consists of randomly distributed stiff grains bonded by a thin layer of tough adhesive phase.To assess the performance of the bioinspired design,a conventional unidirectional long-fiber composite made with the same amount of hard and soft phases was studied.The finite element simulation results indicated that the toughness,strength and elastic modulus of the bioinspired composite was 312%,83%,and 55%of that of the conventional composite,respectively.The toughness improvement was attributed to the prevalent energy-dissipating damage of adhesive phase in subunit-B and crack-bridging by subunit-A,the two major toughening mechanisms in the model.This study exemplifies some insights into natural design of materials to gain better material performance.
基金Project(52425213)supported by the National Science Fund for Distinguished Young Scholars of ChinaProjects(52278461,52308467)supported by the National Natural Science Foundation of China+1 种基金Projects(2021YFF0502100,2021YFB2600900)supported by the National Key R&D Program of ChinaProject(2022JDTD0015)supported by the Sichuan Province Youth Science and Technology Innovation Team,China。
文摘The interface of slab track laid in cold regions is prone to debonding under the coupling of freeze-thaw cyclesand temperature loads.Based on the composite specimen tests,the parameters of cohesive zone model were obtained andused in a simulation model of CRTS III prefabricated slab track to study the interlayer damage.The results show that 1)the digital image correlation(DIC)technique can accurately capture the strain field changes on the interface of compositespecimens under splitting and shear loading;2)when the temperature gradient is−40℃/m−60℃/m,the interfacedamage of the slab track is minimal and presents different patterns of expansion under positive and negative temperaturegradients,each corresponding to damage of the cohesive element dominated by shear stress and normal tensile stress,respectively;3)the reduction of the elastic modulus at the concrete base after freeze-thaw inhibits interface damage andleads to a higher starting temperature gradient load,but cracking can occur on the concrete base after 150 freeze-thaws.For this reason,in the light of damage control of both the interface and concrete base,the elastic modulus of the concretebase is 54%or over that without freeze-thaw cycles.
文摘The cohesive zone model(CZM)has been used widely and successfully in fracture propagation,but some basic problems are still to be solved.In this paper,artificial compliance and discontinuous force in CZM are investigated.First,theories about the cohesive element(local coordinate system,stiffness matrix,and internal nodal force)are presented.The local coordinate system is defined to obtain local separation;the stiffness matrix for an eight-node cohesive element is derived from the calculation of strain energy;internal nodal force between the cohesive element and bulk element is obtained from the principle of virtual work.Second,the reason for artificial compliance is explained by the effective stiffnesses of zero-thickness and finite-thickness cohesive elements.Based on the effective stiffness,artificial compliance can be completely removed by adjusting the stiffness of the finite-thickness cohesive element.This conclusion is verified from 1D and 3D simulations.Third,three damage evolution methods(monotonically increasing effective separation,damage factor,and both effective separation and damage factor)are analyzed.Under constant unloading and reloading conditions,the monotonically increasing damage factor method without discontinuous force and healing effect is a better choice than the other two methods.The proposed improvements are coded in LS-DYNA user-defined material,and a drop weight tear test verifies the improvements.
