针对传统单脉冲布里渊光时域反射系统信号微弱、性能提升受限的问题,提出了一种雪崩光电二极管(APD)检测器本地外差检测的格雷(Golay)编码布里渊光时域反射系统。分析了Golay码应用于该系统的编解码原理及系统外差检测原理,讨论了光纤...针对传统单脉冲布里渊光时域反射系统信号微弱、性能提升受限的问题,提出了一种雪崩光电二极管(APD)检测器本地外差检测的格雷(Golay)编码布里渊光时域反射系统。分析了Golay码应用于该系统的编解码原理及系统外差检测原理,讨论了光纤受激布里渊散射阈值对编码系统平均入纤功率的限制,推导了系统信噪比的数学表达式,研究系统信噪比与APD倍增因子、编码长度的关系,分别得到了APD最佳倍增因子和系统最佳编码长度的表达式。MATLAB仿真结果表明,选用带宽为500 MHz的APD光电检测器和峰值功率50 m W、脉冲宽度100 ns的入纤脉冲时,系统APD倍增因子和编码长度均存在最佳值,系统最佳编码长度的确定不仅依赖于系统的散粒噪声和热噪声功率,还由光纤受激布里渊散射阈值共同决定。经优化计算得,该系统的APD最佳倍增因子为5,最佳编码长度为128位时,在25 km光纤末端的系统信噪比比传统单脉冲系统提高了26.42 d B,温度和应变分辨率分别达到了1.60℃和35.48。展开更多
In this paper, a statistical recognition method of the binary BCH code is proposed. The method is applied to both primitive and non-primitive binary BCH code. The block length is first recognized based on the cyclic f...In this paper, a statistical recognition method of the binary BCH code is proposed. The method is applied to both primitive and non-primitive binary BCH code. The block length is first recognized based on the cyclic feature under the condition of the frame length known. And then candidate polynomials are achieved which meet the restrictions. Among the candidate polynomials, the most optimal polynomial is selected based on the minimum rule of the weights sum of the syndromes. Finally, the best polynomial was factorized to get the generator polynomial recognized. Simulation results show that the method has strong capability of anti-random bit error. Besides, the algorithm proposed is very simple, so it is very practical for hardware im-plementation.展开更多
该文基于有限多项式环的理论,提出了码长连续变化的准循环低密度奇偶校验(Quasi-Cyclic Low Density Parity Check,QC-LDPC)码的设计方法。当有限环基数大于某个门限值时,在此环内通过一定规则选择参数生成移位项,利用它们构造出的校验...该文基于有限多项式环的理论,提出了码长连续变化的准循环低密度奇偶校验(Quasi-Cyclic Low Density Parity Check,QC-LDPC)码的设计方法。当有限环基数大于某个门限值时,在此环内通过一定规则选择参数生成移位项,利用它们构造出的校验矩阵均可以达到较大的圈长(girth)值。在设计中,有限环基数为连续的整数,且基数与码长呈线性关系,因此能够在girth值不变的前提下实现码长的连续变化。该文分析并证明了该构造方法大大增加了可用的高性能QC-LDPC码数量,更好地服务于自适应链路系统。展开更多
文摘针对传统单脉冲布里渊光时域反射系统信号微弱、性能提升受限的问题,提出了一种雪崩光电二极管(APD)检测器本地外差检测的格雷(Golay)编码布里渊光时域反射系统。分析了Golay码应用于该系统的编解码原理及系统外差检测原理,讨论了光纤受激布里渊散射阈值对编码系统平均入纤功率的限制,推导了系统信噪比的数学表达式,研究系统信噪比与APD倍增因子、编码长度的关系,分别得到了APD最佳倍增因子和系统最佳编码长度的表达式。MATLAB仿真结果表明,选用带宽为500 MHz的APD光电检测器和峰值功率50 m W、脉冲宽度100 ns的入纤脉冲时,系统APD倍增因子和编码长度均存在最佳值,系统最佳编码长度的确定不仅依赖于系统的散粒噪声和热噪声功率,还由光纤受激布里渊散射阈值共同决定。经优化计算得,该系统的APD最佳倍增因子为5,最佳编码长度为128位时,在25 km光纤末端的系统信噪比比传统单脉冲系统提高了26.42 d B,温度和应变分辨率分别达到了1.60℃和35.48。
文摘In this paper, a statistical recognition method of the binary BCH code is proposed. The method is applied to both primitive and non-primitive binary BCH code. The block length is first recognized based on the cyclic feature under the condition of the frame length known. And then candidate polynomials are achieved which meet the restrictions. Among the candidate polynomials, the most optimal polynomial is selected based on the minimum rule of the weights sum of the syndromes. Finally, the best polynomial was factorized to get the generator polynomial recognized. Simulation results show that the method has strong capability of anti-random bit error. Besides, the algorithm proposed is very simple, so it is very practical for hardware im-plementation.
文摘该文基于有限多项式环的理论,提出了码长连续变化的准循环低密度奇偶校验(Quasi-Cyclic Low Density Parity Check,QC-LDPC)码的设计方法。当有限环基数大于某个门限值时,在此环内通过一定规则选择参数生成移位项,利用它们构造出的校验矩阵均可以达到较大的圈长(girth)值。在设计中,有限环基数为连续的整数,且基数与码长呈线性关系,因此能够在girth值不变的前提下实现码长的连续变化。该文分析并证明了该构造方法大大增加了可用的高性能QC-LDPC码数量,更好地服务于自适应链路系统。
