Friction stir welding [FSW） has achieved remarkable success in the joining and processing of aluminium alloys and other softer structural alloys. Conventional FSW, however, has not been entirely successful in the joi...Friction stir welding [FSW） has achieved remarkable success in the joining and processing of aluminium alloys and other softer structural alloys. Conventional FSW, however, has not been entirely successful in the joining, processing and manufacturing of different desired materials essential to meet the sophis- ticated green globe requirements. Through the efforts of improving the process and transferring the existing friction stir knowledge base to other advanced applications, several friction stir based daughter technologies have emerged over the timeline, A few among these technologies are well developed while others are under the process of emergence. Beginning with a broad classification of the scattered fric- tions stir based technologies into two categories, welding and processing, it appears now time to know, compile and review these to enable their rapid access for reference and academia. In this review article, the friction stir based technologies classified under the categol^J of welding are those applied for join- ing of materials while the remnant are labeled as friction stir processing （FSP） technologies. This review article presents an overview of four general aspects of both the developed and the developing friction stir based technologies, their associated process parameters, metallurgical features of their products and their feasibility and application to various materials. The lesser known and emerging technologies have been emphasized.展开更多
Laser cladding is a promising photon-based surface engineering technique broadly utilized for fabricating harder and wear resistant composite coatings. In spite of excellent properties, the practical applications of l...Laser cladding is a promising photon-based surface engineering technique broadly utilized for fabricating harder and wear resistant composite coatings. In spite of excellent properties, the practical applications of laser claddings are relatively restricted when compared with well-established coating techniques because of their inherent defects identified as cracks, pores and inclusions. Substantial evidence suggests that the incorporation of an appropriate amount of rare earth in laser claddings can remarkably prevent these defects. Additionally, the presence of rare earth in laser claddings can notably enhance tribo-mechanical properties such as surface hardness, modulus of elasticity, fracture toughness, friction coefficient and wear rate. In this literature review, the effect of rare earth in reducing dilution and cracks susceptibility of laser claddings in addition to microstructural refinement attained was examined. Mechanical and tribological properties of these claddings along with their underlying mechanism were discussed in detail. Finally, this article summarizes current applications of laser claddings based on rare earth and was concluded with future research directions.展开更多
The effects of CeO2 on microstructure and corrosion resistance of TiC-VC reinforced Fe-based laser cladding layers were investigated. The results showed that carbides presented in cladding layers were TiVC2 and VC. A ...The effects of CeO2 on microstructure and corrosion resistance of TiC-VC reinforced Fe-based laser cladding layers were investigated. The results showed that carbides presented in cladding layers were TiVC2 and VC. A small quantity of CeC appeared with 2.0 wt.% CeO2 addition. The amount of lamellar pearlite increased while the amount of residual austenite decreased with increasing CeO2 addition. The corrosion resistance of cladding layers increased firstly and then decreased with the addition of CeO2 increasing. The EIS spectrum of the cladding layer without CeO2 was composed of an inductive arc at low frequency and a capacitive arc at high frequency. The cladding layer with 0.5 wt.% CeO2 addition showed the best corrosion resistance, and then the inductive arc at low frequency transformed into a capacitive arc.展开更多
在φ90/φ200×200 mm 可逆的四辊轧机上进行异步轧制复合新工艺的研究,并与常规轧制的特性比较;研究了轧制工艺参数对复合过程的影响。结果表明,异步轧制对双金属固相复合有特殊的优越性,充分显示出降低轧制压力的特点。采用此工...在φ90/φ200×200 mm 可逆的四辊轧机上进行异步轧制复合新工艺的研究,并与常规轧制的特性比较;研究了轧制工艺参数对复合过程的影响。结果表明,异步轧制对双金属固相复合有特殊的优越性,充分显示出降低轧制压力的特点。采用此工艺可以在一般的四辊轧机上轧出宽板带复合双金属。此工艺可以应用于双金属固相复合的工业生产中。展开更多
H13 powder is cladded on steel P20 （base） by continuous COe laser, and the influence of technological pa rameters such as the laser power is analyzed. The 3-D model of synchronous powder feeding is built under Gauss...H13 powder is cladded on steel P20 （base） by continuous COe laser, and the influence of technological pa rameters such as the laser power is analyzed. The 3-D model of synchronous powder feeding is built under Gauss heat source. The simulative results in the heat affected zone are compared with the experimental ones, and the average er rors of width and depth are 15% and 4.5%, respectively. It is found that the simulative results provide basic data for investigating of laser cladding further.展开更多
FeCoCrNiA1Bx（x=0, 0.25, 0.50, 0.75） coatings were prepared by laser cladding to study the effects of boron on the structure and properties of high-entropy alloys coatings. The microstructure, microhardness, and wear...FeCoCrNiA1Bx（x=0, 0.25, 0.50, 0.75） coatings were prepared by laser cladding to study the effects of boron on the structure and properties of high-entropy alloys coatings. The microstructure, microhardness, and wear resistance properties of the samples were investigated by scanning electron microscopy, X-ray diffraction, metallographic micro-hardness test, and friction wear test, respectively, and the mechanism of the wear behavior was also analyzed. The results showed that the high-entropy alloys consisted of BCC phase and eutectic structure, which contained FCC phase and M2B. With boron addition, the content of BCC phase increased while that of eutectic structure decreased. The wear resistance of the high-entropy coatings was considerably improved with increasing addition of horon, and accordingly, the FeCoCrNiAlB0.75 coating showed the best wear resistance.展开更多
Laser cladding experiments were done on a 5-kW continuous wave CO2 laser to synthesize TiC and TiB rein- fowed titanium matrix composite coatings on Ti-6AI-4V alloy with a mixture of Ti and B4C precursor powder. The t...Laser cladding experiments were done on a 5-kW continuous wave CO2 laser to synthesize TiC and TiB rein- fowed titanium matrix composite coatings on Ti-6AI-4V alloy with a mixture of Ti and B4C precursor powder. The ther- modynamics of the reactions were calculated and analyzed. The microstructure and phase evolution of TiB and TiC com- posites were investigated. The results showed that the chemical reaction between Ti and B4C would release much heat, and these compounds, TiC, TiB, and small amount of TiB2, can be formed on the surface of Ti-6AI-4V alloy if the supplied en- ergy is sufficient to excite the reaction among the initial products. A good metallurgical bond between the coating and the substrate can be achieved. The microhardness of coating was irregular and the maximum value was approximately HV600.展开更多
This paper presents the results of a study concerned with the surface hardening of Fe-based alloys and WC-8Co cemented carbide by inte- grating laser cladding and the electrospark deposition processes. Specimens of lo...This paper presents the results of a study concerned with the surface hardening of Fe-based alloys and WC-8Co cemented carbide by inte- grating laser cladding and the electrospark deposition processes. Specimens of low carbon steel were processed firstly by laser cladding with Fe-based alloy powders and then by electrospark deposition with WC-SCo cemented carbide. It is shown that, for these two treatments, the electrospark coating possesses finer microstructure than the laser coating, and the thickness and surface hardness of the electrospark coating can be substantially increased.展开更多
Particulate reinforced metal matrix composite(PR-MMC) has excellent properties such as good wear resistance,corrosion resistance and high temperature properties.Laser cladding is usually used to form PR-MMC on metal s...Particulate reinforced metal matrix composite(PR-MMC) has excellent properties such as good wear resistance,corrosion resistance and high temperature properties.Laser cladding is usually used to form PR-MMC on metal surface with various volume fractions of ceramic particles.Recent literatures showed that laser melting of powder mixture containing carbon and carbide-forming elements,was favorable for the formation of in-situ synthesized carbide particles.In this paper,rare earth oxide(RE2O3) was added into t...展开更多
CeO2 nanoparticles(nano-CeO2p) were added into laser cladded NiCoCrAlY coatings on Ni-based superalloy substrate to improve the microstructure and properties.Scanning electron microscope(SEM),X-ray diffractometer(XRD)...CeO2 nanoparticles(nano-CeO2p) were added into laser cladded NiCoCrAlY coatings on Ni-based superalloy substrate to improve the microstructure and properties.Scanning electron microscope(SEM),X-ray diffractometer(XRD),micro-hardness tester,and heat treatment furnace were employed to investigate their morphologies,phases,micro-hardness and thermal shock resistance,compared with the coating without nanoparticles added.The results showed that the microstructure and properties of the coatings with the addition ...展开更多
基金financial support on this work from the National Natural Science Foundation of China(Grant Nos.51475272 and 51550110501)Shandong University for the Postdoctoral fellowship
文摘Friction stir welding [FSW） has achieved remarkable success in the joining and processing of aluminium alloys and other softer structural alloys. Conventional FSW, however, has not been entirely successful in the joining, processing and manufacturing of different desired materials essential to meet the sophis- ticated green globe requirements. Through the efforts of improving the process and transferring the existing friction stir knowledge base to other advanced applications, several friction stir based daughter technologies have emerged over the timeline, A few among these technologies are well developed while others are under the process of emergence. Beginning with a broad classification of the scattered fric- tions stir based technologies into two categories, welding and processing, it appears now time to know, compile and review these to enable their rapid access for reference and academia. In this review article, the friction stir based technologies classified under the categol^J of welding are those applied for join- ing of materials while the remnant are labeled as friction stir processing （FSP） technologies. This review article presents an overview of four general aspects of both the developed and the developing friction stir based technologies, their associated process parameters, metallurgical features of their products and their feasibility and application to various materials. The lesser known and emerging technologies have been emphasized.
基金Project supported by the University of Malaya Research Grant(UMRG,RP013A-13AET)University of Malaya Research Grant(UMRG,RP035A-15AET)
文摘Laser cladding is a promising photon-based surface engineering technique broadly utilized for fabricating harder and wear resistant composite coatings. In spite of excellent properties, the practical applications of laser claddings are relatively restricted when compared with well-established coating techniques because of their inherent defects identified as cracks, pores and inclusions. Substantial evidence suggests that the incorporation of an appropriate amount of rare earth in laser claddings can remarkably prevent these defects. Additionally, the presence of rare earth in laser claddings can notably enhance tribo-mechanical properties such as surface hardness, modulus of elasticity, fracture toughness, friction coefficient and wear rate. In this literature review, the effect of rare earth in reducing dilution and cracks susceptibility of laser claddings in addition to microstructural refinement attained was examined. Mechanical and tribological properties of these claddings along with their underlying mechanism were discussed in detail. Finally, this article summarizes current applications of laser claddings based on rare earth and was concluded with future research directions.
基金Project supported by National Natural Science Foundation of China(51271099)
文摘The effects of CeO2 on microstructure and corrosion resistance of TiC-VC reinforced Fe-based laser cladding layers were investigated. The results showed that carbides presented in cladding layers were TiVC2 and VC. A small quantity of CeC appeared with 2.0 wt.% CeO2 addition. The amount of lamellar pearlite increased while the amount of residual austenite decreased with increasing CeO2 addition. The corrosion resistance of cladding layers increased firstly and then decreased with the addition of CeO2 increasing. The EIS spectrum of the cladding layer without CeO2 was composed of an inductive arc at low frequency and a capacitive arc at high frequency. The cladding layer with 0.5 wt.% CeO2 addition showed the best corrosion resistance, and then the inductive arc at low frequency transformed into a capacitive arc.
文摘在φ90/φ200×200 mm 可逆的四辊轧机上进行异步轧制复合新工艺的研究,并与常规轧制的特性比较;研究了轧制工艺参数对复合过程的影响。结果表明,异步轧制对双金属固相复合有特殊的优越性,充分显示出降低轧制压力的特点。采用此工艺可以在一般的四辊轧机上轧出宽板带复合双金属。此工艺可以应用于双金属固相复合的工业生产中。
基金Item Sponsored by Fund of Office of Science and Technology of Zhejiang Province of China(2008C31041)
文摘H13 powder is cladded on steel P20 （base） by continuous COe laser, and the influence of technological pa rameters such as the laser power is analyzed. The 3-D model of synchronous powder feeding is built under Gauss heat source. The simulative results in the heat affected zone are compared with the experimental ones, and the average er rors of width and depth are 15% and 4.5%, respectively. It is found that the simulative results provide basic data for investigating of laser cladding further.
基金funded by National Natural Science Foundation of China(No.51301112)Natural Science Foundation of Liaoning Province of China (No.201602553)Science Research Program of Education Department in Liaoning Province of China (No.L2014048)
文摘FeCoCrNiA1Bx（x=0, 0.25, 0.50, 0.75） coatings were prepared by laser cladding to study the effects of boron on the structure and properties of high-entropy alloys coatings. The microstructure, microhardness, and wear resistance properties of the samples were investigated by scanning electron microscopy, X-ray diffraction, metallographic micro-hardness test, and friction wear test, respectively, and the mechanism of the wear behavior was also analyzed. The results showed that the high-entropy alloys consisted of BCC phase and eutectic structure, which contained FCC phase and M2B. With boron addition, the content of BCC phase increased while that of eutectic structure decreased. The wear resistance of the high-entropy coatings was considerably improved with increasing addition of horon, and accordingly, the FeCoCrNiAlB0.75 coating showed the best wear resistance.
基金financially supported by the National "973" Research Project (No. 2006CB605206-1)
文摘Laser cladding experiments were done on a 5-kW continuous wave CO2 laser to synthesize TiC and TiB rein- fowed titanium matrix composite coatings on Ti-6AI-4V alloy with a mixture of Ti and B4C precursor powder. The ther- modynamics of the reactions were calculated and analyzed. The microstructure and phase evolution of TiB and TiC com- posites were investigated. The results showed that the chemical reaction between Ti and B4C would release much heat, and these compounds, TiC, TiB, and small amount of TiB2, can be formed on the surface of Ti-6AI-4V alloy if the supplied en- ergy is sufficient to excite the reaction among the initial products. A good metallurgical bond between the coating and the substrate can be achieved. The microhardness of coating was irregular and the maximum value was approximately HV600.
文摘This paper presents the results of a study concerned with the surface hardening of Fe-based alloys and WC-8Co cemented carbide by inte- grating laser cladding and the electrospark deposition processes. Specimens of low carbon steel were processed firstly by laser cladding with Fe-based alloy powders and then by electrospark deposition with WC-SCo cemented carbide. It is shown that, for these two treatments, the electrospark coating possesses finer microstructure than the laser coating, and the thickness and surface hardness of the electrospark coating can be substantially increased.
文摘Particulate reinforced metal matrix composite(PR-MMC) has excellent properties such as good wear resistance,corrosion resistance and high temperature properties.Laser cladding is usually used to form PR-MMC on metal surface with various volume fractions of ceramic particles.Recent literatures showed that laser melting of powder mixture containing carbon and carbide-forming elements,was favorable for the formation of in-situ synthesized carbide particles.In this paper,rare earth oxide(RE2O3) was added into t...
基金supported by the Doctoral Program of Higher Education of China (20060287019)the Opening Research Fund of Jiangsu Key Laboratory of Tribology of China (kjsmcx07001)Graduate Innovation Foundation of Jiangsu Province of China (CX08B-039Z)
文摘CeO2 nanoparticles(nano-CeO2p) were added into laser cladded NiCoCrAlY coatings on Ni-based superalloy substrate to improve the microstructure and properties.Scanning electron microscope(SEM),X-ray diffractometer(XRD),micro-hardness tester,and heat treatment furnace were employed to investigate their morphologies,phases,micro-hardness and thermal shock resistance,compared with the coating without nanoparticles added.The results showed that the microstructure and properties of the coatings with the addition ...
