A computational particle fluid-dynamics model coupled with an energy-minimization multi-scale(EMMS)drag model was applied to investigate the influence of particle-size distribution on the hydrodynamics of a three-dime...A computational particle fluid-dynamics model coupled with an energy-minimization multi-scale(EMMS)drag model was applied to investigate the influence of particle-size distribution on the hydrodynamics of a three-dimensional full-loop circulating fluidized bed.Different particle systems,including one monodisperse and two polydisperse cases,were investigated.The numerical model was validated by comparing its results with the experimental axial voidage distribution and solid mass flux.The EMMS drag model had a high accuracy in the computational particle fluid-dynamics simulation of the three-dimensional full-loop circulating fluidized bed.The total number of parcels in the system(Np)influenced the axial voidage distribution in the riser,especially at the lower part of the riser.Additional numerical simulation results showed that axial segregation by size was predicted in the two polydisperse cases and the segregation size increased with an increase in the number of size classes.The axial voidage distribution at the lower portion of the riser was significantly influenced by particle-size distribution.However,radial segregation could only be correctly predicted in the upper region of the riser in the polydisperse case of three solid species.展开更多
Stable and controllable solid flow is essential in circulating fluidized bed (CFB) systems. The L-valve is a typical non-mechanical valve that can provide flexible solid feeding. The investigation of the solid circula...Stable and controllable solid flow is essential in circulating fluidized bed (CFB) systems. The L-valve is a typical non-mechanical valve that can provide flexible solid feeding. The investigation of the solid circulation rate and the hydrodynamic characteristics of the L-valve is crucial to its design and operation. The gas-solid flow in the L-valve of a full-loop CFB is studied with the coarse-grained discrete particle method (EMMS-DPM). Good agreements on the solid circulation rate and the pressure drop through the L-valve are achieved between the simulated and experimental data. The solid circulation rate increases linearly with the aeration velocity until the stable particle circulation of the CFB is destroyed. The flow patterns in the horizontal section of L-valve are gas-solid slug flow above the stationary solid layer and the moving solid layer, respectively. The effects of L-valve geometric parameters on the solid flow characteristics are also investigated. The results indicate that reducing the diameter and length of the horizontal section of L-valve can improve the solid transport efficiency, especially at low aeration velocity. Besides, the solid conveying capacity and flow stability are improved when the sharp bend of L-valve is modified to be a gradual bend.展开更多
This research investigated the outputting circulation current inhibition characteristic which are controlled by the instantaneous feedback voltage in inverter parallel driving of the mine hoist. We established a trans...This research investigated the outputting circulation current inhibition characteristic which are controlled by the instantaneous feedback voltage in inverter parallel driving of the mine hoist. We established a transfer function of the parallel inverters controlled by the close-loop adjustment of instantaneous voltage feedback. The influence of the parameters of the close-loop feedback circuit to the inhibition effects to the outputting circulation current is observed. After analyzing the circulating current inhibition characteristics, the proportion integration （PI） controller is introduced into the close-loop adjustment by instantaneous voltage feedback. The characteristics equation is gained to determine the PI parameters by drawing the Bode plots. The inhibition effects of the proposed controller are examined by the established simulation model of parallel inverter system. The harmonic distortion rate at the outputting voltage frequency value of 4, 10, 20, 41 and 50 Hz, are all lower than 2.32 % by the instantaneous outputting voltage feedback.展开更多
L-valve is often used as a non-mechanical valve for the circulation of solids in gas-solids fluidized bed(GSFB)due to its advantages in simple construction and easy control.The information on solids circu-lation rate ...L-valve is often used as a non-mechanical valve for the circulation of solids in gas-solids fluidized bed(GSFB)due to its advantages in simple construction and easy control.The information on solids circu-lation rate as well as the hydrodynamics performance of the CFB with L-valve is of great importance for its better control and design.This paper proposes a Eulerian-Eulerian approach based numerical model integrating the computational fluid dynamics(CFD)with turbulent model,the kinetic theory of granular flow(KTGF)and the drag model,thus the solids circulation rate and the local phase velocity as well as solids volume fraction can be predicted simultaneously.With this model,the hydrodynamics perfor-mance of the full loop GSCFB with a L-valve is analyzed in detail.It is found that the drag model affects the simulation significantly and the(energy minimization multiscale)EMMS method shows good per-formance in the full-loop simulation of GSCFB.展开更多
Multiply-connected Hall plates show different phenomena than singly connected Hall plates. In part I (published in Journal of Applied Physics and Mathematics), we discussed topologies where a stream function can be de...Multiply-connected Hall plates show different phenomena than singly connected Hall plates. In part I (published in Journal of Applied Physics and Mathematics), we discussed topologies where a stream function can be defined, with special reference to Hall/Anti-Hall bar configurations. In part II, we focus on topologies where no conventional stream function can be defined, like Corbino disks. If current is injected and extracted at different boundaries of a multiply-connected conductive region, the current density shows spiral streamlines at strong magnetic field. Spiral streamlines also appear in simply-connected Hall plates when current contacts are located in their interior instead of their boundary, particularly if the contacts are very small. Spiral streamlines and circulating current are studied for two complementary planar device geometries: either all boundaries are conducting or all boundaries are insulating. The latter case means point current contacts and it can be treated similarly to singly connected Hall plates with peripheral contacts through the definition of a so-called loop stream function. This function also establishes a relation between Hall plates with complementary boundary conditions. The theory is explained by examples.展开更多
基金This work was financially supported by the National Natural Science Foundation of China through contract No.91634109 and No.51676158the National Key Research and Development Program of China(2016YFB0600102).
文摘A computational particle fluid-dynamics model coupled with an energy-minimization multi-scale(EMMS)drag model was applied to investigate the influence of particle-size distribution on the hydrodynamics of a three-dimensional full-loop circulating fluidized bed.Different particle systems,including one monodisperse and two polydisperse cases,were investigated.The numerical model was validated by comparing its results with the experimental axial voidage distribution and solid mass flux.The EMMS drag model had a high accuracy in the computational particle fluid-dynamics simulation of the three-dimensional full-loop circulating fluidized bed.The total number of parcels in the system(Np)influenced the axial voidage distribution in the riser,especially at the lower part of the riser.Additional numerical simulation results showed that axial segregation by size was predicted in the two polydisperse cases and the segregation size increased with an increase in the number of size classes.The axial voidage distribution at the lower portion of the riser was significantly influenced by particle-size distribution.However,radial segregation could only be correctly predicted in the upper region of the riser in the polydisperse case of three solid species.
基金the National Natural Science Foundation of China(grant No.22278404),and the Science Fund for Creative Research Groups of the National Natural Science Foundation of China(grant No.21921005)the National Key Research and Development Program of China(grant No.2023YFC2908002)the State Key Laboratory of Multiphase Complex Systems(grant No.MESO-23-A03).
文摘Stable and controllable solid flow is essential in circulating fluidized bed (CFB) systems. The L-valve is a typical non-mechanical valve that can provide flexible solid feeding. The investigation of the solid circulation rate and the hydrodynamic characteristics of the L-valve is crucial to its design and operation. The gas-solid flow in the L-valve of a full-loop CFB is studied with the coarse-grained discrete particle method (EMMS-DPM). Good agreements on the solid circulation rate and the pressure drop through the L-valve are achieved between the simulated and experimental data. The solid circulation rate increases linearly with the aeration velocity until the stable particle circulation of the CFB is destroyed. The flow patterns in the horizontal section of L-valve are gas-solid slug flow above the stationary solid layer and the moving solid layer, respectively. The effects of L-valve geometric parameters on the solid flow characteristics are also investigated. The results indicate that reducing the diameter and length of the horizontal section of L-valve can improve the solid transport efficiency, especially at low aeration velocity. Besides, the solid conveying capacity and flow stability are improved when the sharp bend of L-valve is modified to be a gradual bend.
文摘This research investigated the outputting circulation current inhibition characteristic which are controlled by the instantaneous feedback voltage in inverter parallel driving of the mine hoist. We established a transfer function of the parallel inverters controlled by the close-loop adjustment of instantaneous voltage feedback. The influence of the parameters of the close-loop feedback circuit to the inhibition effects to the outputting circulation current is observed. After analyzing the circulating current inhibition characteristics, the proportion integration （PI） controller is introduced into the close-loop adjustment by instantaneous voltage feedback. The characteristics equation is gained to determine the PI parameters by drawing the Bode plots. The inhibition effects of the proposed controller are examined by the established simulation model of parallel inverter system. The harmonic distortion rate at the outputting voltage frequency value of 4, 10, 20, 41 and 50 Hz, are all lower than 2.32 % by the instantaneous outputting voltage feedback.
基金support by the National Key Research and Development Program of China(grant No.2018YFE0111100)the National Nature Science Foundation of China(grant No.22078230)the Open Foundation of State Key Laboratory of Chemical Engineering(grant No.SKL-ChE-21B07).
文摘L-valve is often used as a non-mechanical valve for the circulation of solids in gas-solids fluidized bed(GSFB)due to its advantages in simple construction and easy control.The information on solids circu-lation rate as well as the hydrodynamics performance of the CFB with L-valve is of great importance for its better control and design.This paper proposes a Eulerian-Eulerian approach based numerical model integrating the computational fluid dynamics(CFD)with turbulent model,the kinetic theory of granular flow(KTGF)and the drag model,thus the solids circulation rate and the local phase velocity as well as solids volume fraction can be predicted simultaneously.With this model,the hydrodynamics perfor-mance of the full loop GSCFB with a L-valve is analyzed in detail.It is found that the drag model affects the simulation significantly and the(energy minimization multiscale)EMMS method shows good per-formance in the full-loop simulation of GSCFB.
文摘Multiply-connected Hall plates show different phenomena than singly connected Hall plates. In part I (published in Journal of Applied Physics and Mathematics), we discussed topologies where a stream function can be defined, with special reference to Hall/Anti-Hall bar configurations. In part II, we focus on topologies where no conventional stream function can be defined, like Corbino disks. If current is injected and extracted at different boundaries of a multiply-connected conductive region, the current density shows spiral streamlines at strong magnetic field. Spiral streamlines also appear in simply-connected Hall plates when current contacts are located in their interior instead of their boundary, particularly if the contacts are very small. Spiral streamlines and circulating current are studied for two complementary planar device geometries: either all boundaries are conducting or all boundaries are insulating. The latter case means point current contacts and it can be treated similarly to singly connected Hall plates with peripheral contacts through the definition of a so-called loop stream function. This function also establishes a relation between Hall plates with complementary boundary conditions. The theory is explained by examples.
