A novel CVD process for the preparation of ultrafine rhenium powders was investigated using ammonium perrhenate as starting materials. In the process, volatile rhenium oxides, such as ReO4 and Re2O7, were vaporized un...A novel CVD process for the preparation of ultrafine rhenium powders was investigated using ammonium perrhenate as starting materials. In the process, volatile rhenium oxides, such as ReO4 and Re2O7, were vaporized under a controlled oxidizing atmosphere via the pyrolysis of ammonium perrhenate, and carried into reduction zone by carrier gas, and there reduced into rhenium powders by hydrogen gas. Thermodynamic calculations indicated that Re207 could be prevented from further decomposition through controlling the oxygen partial pressure higher than 10 1.248 Pa in the pyrolysis of ammonium perrhenate. This result was further validated via DSC-TGA analysis of ammonium perrhenate. The typical rhenium powders prepared by the CVD method proposed show irregular polyhedron morphology with particle size in the range of 100-800 nm and a Ds0 of 308 nm. The specific surface area and oxygen content were measured to be 4.37 m^2/g and 0.45%, respectively.展开更多
The Co Mg O and Co Mn Mg O catalysts are prepared by a co-precipitation method and used as the catalysts for the synthesis of carbon nanotubes（CNTs） through the catalytic chemical vapor deposition（CCVD）. The effec...The Co Mg O and Co Mn Mg O catalysts are prepared by a co-precipitation method and used as the catalysts for the synthesis of carbon nanotubes（CNTs） through the catalytic chemical vapor deposition（CCVD）. The effects of Mn addition on the carbon yield and structure are investigated. The catalysts are characterized by temperature programmed reduction（TPR） and X-ray diffraction（XRD） techniques, and the synthesized carbon materials are characterized by transmission electron microscopy（TEM） and thermo gravimetric analysis（TG）. TEM measurement indicates that the catalyst Co Mg O enclosed completely in the produced graphite layer results in the deactivation of the catalyst. TG results suggest that the Co Mn Mg O catalyst has a higher selectivity for CNTs than Co Mg O. Meanwhile, different diameters of CNTs are synthesized by Co Mn Mg O catalysts with various amounts of Co content, and the results show that the addition of Mn avoids forming the enclosed catalyst, prevents the formation of amorphous carbon, subsequently promotes the growth of CNTs, and the catalyst with decreased Co content is favorable for the synthesis of CNTs with a narrow diameter distribution.The Co Mn Mg O catalyst with 40% Co content has superior catalytic activity for the growth of carbon nanotubes.展开更多
The effects of additives containing iron or nickel during chemical vapor deposition （CVD） on the growth of carbon nanotubes （CNTs） by methane decomposition on Mo/MgO catalyst were investigated. Ferrocene and nicke...The effects of additives containing iron or nickel during chemical vapor deposition （CVD） on the growth of carbon nanotubes （CNTs） by methane decomposition on Mo/MgO catalyst were investigated. Ferrocene and nickel nitrate were introduced as deactivation inhibitors by in-situ evaporation during CVD. The precisely controlled in-situ introduction of these inhibitors increased the surface renewal of catalyst, and therefore prevented the catalyst from deactivation. Using this method, aligned multi-walled CNTs with parallel mesopores can be produced on a large scale.展开更多
Catalytic direct decomposition of NO by perovskite-type catalysts has attracted much attention for the various possible components and the unique structure. LaCoO_3 nanoparticles were precipitated on a-Al_2O_3 micro p...Catalytic direct decomposition of NO by perovskite-type catalysts has attracted much attention for the various possible components and the unique structure. LaCoO_3 nanoparticles were precipitated on a-Al_2O_3 micro powders by rotary chemical vapor deposition（rotary CVD） and its catalytic performance for the decomposition of NO was investigated. LaCoO_3 nano-particles with 100 nm in average diameter and 1.5% in mass were uniformly dispersed on a-Al_2O_3 powder. The conversion of NO increased with increasing temperature from 400 to 950 ℃, and reached 28.7% at 950 ℃. The gas velocity of transformed NO on LaCoO_3 nano-particles catalyst per mass unit was 7.7 mL/（g min）, showing a good catalytic activity over the calculated results of pure catalysts. After five times of aging performance experiments, the NO conversion kept the same value, showing a good aging performance and thermal stability.展开更多
文摘A novel CVD process for the preparation of ultrafine rhenium powders was investigated using ammonium perrhenate as starting materials. In the process, volatile rhenium oxides, such as ReO4 and Re2O7, were vaporized under a controlled oxidizing atmosphere via the pyrolysis of ammonium perrhenate, and carried into reduction zone by carrier gas, and there reduced into rhenium powders by hydrogen gas. Thermodynamic calculations indicated that Re207 could be prevented from further decomposition through controlling the oxygen partial pressure higher than 10 1.248 Pa in the pyrolysis of ammonium perrhenate. This result was further validated via DSC-TGA analysis of ammonium perrhenate. The typical rhenium powders prepared by the CVD method proposed show irregular polyhedron morphology with particle size in the range of 100-800 nm and a Ds0 of 308 nm. The specific surface area and oxygen content were measured to be 4.37 m^2/g and 0.45%, respectively.
基金Project supported by the National Basic Research Program of China(Grant No.2011CB201202)
文摘The Co Mg O and Co Mn Mg O catalysts are prepared by a co-precipitation method and used as the catalysts for the synthesis of carbon nanotubes（CNTs） through the catalytic chemical vapor deposition（CCVD）. The effects of Mn addition on the carbon yield and structure are investigated. The catalysts are characterized by temperature programmed reduction（TPR） and X-ray diffraction（XRD） techniques, and the synthesized carbon materials are characterized by transmission electron microscopy（TEM） and thermo gravimetric analysis（TG）. TEM measurement indicates that the catalyst Co Mg O enclosed completely in the produced graphite layer results in the deactivation of the catalyst. TG results suggest that the Co Mn Mg O catalyst has a higher selectivity for CNTs than Co Mg O. Meanwhile, different diameters of CNTs are synthesized by Co Mn Mg O catalysts with various amounts of Co content, and the results show that the addition of Mn avoids forming the enclosed catalyst, prevents the formation of amorphous carbon, subsequently promotes the growth of CNTs, and the catalyst with decreased Co content is favorable for the synthesis of CNTs with a narrow diameter distribution.The Co Mn Mg O catalyst with 40% Co content has superior catalytic activity for the growth of carbon nanotubes.
基金This work was supported by the Guangdong Provincial Natural Science Foundation(No.31420)the Guangzhou City Science andTechnology Project(No.2003Z3-D2071)the Guangdong Provincial Science and Technology Project (No.2006 A10903002).
文摘The effects of additives containing iron or nickel during chemical vapor deposition （CVD） on the growth of carbon nanotubes （CNTs） by methane decomposition on Mo/MgO catalyst were investigated. Ferrocene and nickel nitrate were introduced as deactivation inhibitors by in-situ evaporation during CVD. The precisely controlled in-situ introduction of these inhibitors increased the surface renewal of catalyst, and therefore prevented the catalyst from deactivation. Using this method, aligned multi-walled CNTs with parallel mesopores can be produced on a large scale.
基金supported by the Fundamental Research Funds for the Central Universities(2010SCU22010)the National Basic Research Program of China(973Program,2011CB201202)~~
基金National Science Foundation of China(11364005,11174132)Foundation of the National Key Project for Basic Research(2010CB923402,2011CB922102)+1 种基金International Cooperation Project of Guizhou Province(2012-7002)National Science Foundation of Guizhou Province(2014-2059)
基金Funded by the National Natural Science Foundation of China(Nos.51372188 and 51521001)the 111 Project(B13035)+3 种基金the International Science&Technology Cooperation Program of China(2014DFA53090)the Natural Science Foundation of Hubei Province,China(2016CFA006)the National Key Research and Development Program of China(2017YFB0310400)the Fundamental Research Funds for the Central Universities(WUT:2017II43GX,2017III032)
文摘Catalytic direct decomposition of NO by perovskite-type catalysts has attracted much attention for the various possible components and the unique structure. LaCoO_3 nanoparticles were precipitated on a-Al_2O_3 micro powders by rotary chemical vapor deposition（rotary CVD） and its catalytic performance for the decomposition of NO was investigated. LaCoO_3 nano-particles with 100 nm in average diameter and 1.5% in mass were uniformly dispersed on a-Al_2O_3 powder. The conversion of NO increased with increasing temperature from 400 to 950 ℃, and reached 28.7% at 950 ℃. The gas velocity of transformed NO on LaCoO_3 nano-particles catalyst per mass unit was 7.7 mL/（g min）, showing a good catalytic activity over the calculated results of pure catalysts. After five times of aging performance experiments, the NO conversion kept the same value, showing a good aging performance and thermal stability.
