Flowers that have heteromorphic stamens （heterantherous flowers） have intrigued many researchers ever since the phenomenon was discovered in the 19th century. The morphological differentiation in androecia has been ...Flowers that have heteromorphic stamens （heterantherous flowers） have intrigued many researchers ever since the phenomenon was discovered in the 19th century. The morphological differentiation in androecia has been suggested as a reflection of ＂labor division＂ in pollination in which one type of stamens attracts pollinators and satisfies their demand for pollen as food and the other satisfies the plant＇s need for safe gamete dispersal. The extent and patterns of stamen differentiation differ notably among taxa with heterantherous flowers. Seven species with heteromorphic stamens in three genera were sampled from Leguminosae and Melastomataceae, and the morphological difference of androecia, pollen content, pollen histochemistry and viability, pollen micro- morphology, as well as the main pollinators were examined and compared. Pollen number differs significantly between stamen sets of the same flower in most species investigated, and a correlation of pollen number and anther size was substantiated. Higher pollen viabilities were found in the long （pollinating） stamens of Senna alata （L.） Roxb. and S. bicapsularis （L.） Roxb. Dimorphic pollen exine ornamentation is reported here for the first time in Fordiophytonfaberi Stapf. The height of stigma and anther tips of the long stamens in natural conditions was proved to be highly correlated, supporting the hypothesis that they contact similar areas of the pollinator＇s body.展开更多
Transonic rudder buzz responses based on the computational fluid dynamics or computational structural dynamics(CFD/CSD)loosely method are analyzed for a tailless flying wing unmanned aerial vehicle(UAV).The Reynolds-a...Transonic rudder buzz responses based on the computational fluid dynamics or computational structural dynamics(CFD/CSD)loosely method are analyzed for a tailless flying wing unmanned aerial vehicle(UAV).The Reynolds-averaged Navier-Stokes(RANS)equations and finite element methods based on the detailed aerodynamic and structural model are established,in which the aerodynamic dynamic meshes adopt the unstructured dynamic meshes based on the combination of spring-based smoothing and local remeshing methods,and the lower-upper symmetric-Gauss-Seidel(LU-SGS)iteration and Harten-Lax-van Leer-Einfeldt-Wada(HLLEW)space discrete methods based on the shear stress transport(SST)turbulence model are used to calculate the aerodynamic force.The constraints of the rudder motions are fixed at the end of structural model of the flying wing UAV,and the structural geometric nonlinearities are also considered in the flying wing UAV with a high aspect ratio.The interfaces between structural and aerodynamic models are built with an exact match surface where load transferring is performed based on 3Dinterpolation.The flying wing UAV transonic buzz responses based on the aerodynamic structural coupling method are studied,and the rudder buzz responses and aileron,elevator and flap vibration responses caused by rudder motion are also investigated.The effects of attack,height,rotating angular frequency and Mach number under transonic conditions on the flying wing UAV rudder buzz responses are discussed.The results can be regarded as a reference for the flying wing UAV engineering vibration analysis.展开更多
同学们,你们喜欢吃奶酪吗?本期,Abby和Jack围绕着奶酪展开了一段有趣的小故事,一起来看看吧!Real Cheese真正的奶酪Abby:I wish my parents would take me to Europe.Jack:Why do you want to go there?Abby:I loveEuropeanfood,especia...同学们,你们喜欢吃奶酪吗?本期,Abby和Jack围绕着奶酪展开了一段有趣的小故事,一起来看看吧!Real Cheese真正的奶酪Abby:I wish my parents would take me to Europe.Jack:Why do you want to go there?Abby:I loveEuropeanfood,especiallypizza.Jack:You don't need to go to Italy to eat pizza;you can eat it here.Abby:But I want to eat real Italian pizza with authentic(正宗的)European cheese on top!展开更多
Over 50 genera of bees release pollen from flower anthers using thoracic vibrations,a phenomenon known as buzz-pollination.The efficiency of this process is directly affected by the mechanical properties of the buzzes...Over 50 genera of bees release pollen from flower anthers using thoracic vibrations,a phenomenon known as buzz-pollination.The efficiency of this process is directly affected by the mechanical properties of the buzzes,namely the duration,amplitude,and frequency.Nonetheless,although the effects of the former two properties are well described,the role of buzz frequency on pollen release remains unclear.Furthermore,nearly all of the existing studies describing vibrational properties of natural buzz-pollination are limited to bumblebees(Bombus)and carpenter bees(Xvlocopa)constraining our current understanding of this behavior and its evolution.Therefore,we attempted to minimize this shortcoming by testing whether flower anthers exhibit optimal frequency for pollen release and whether bees tune their buzzes to match these(optimal)frequencies.If true,certain frequencies will trigger more pollen release and lighter bees will reach buzz frequencies closer to this optimum to compensate their smaller buzz amplitudes.Two strategies were used to test these hypotheses:(i)the use of(artificial)vibrational playbacks in a broad range of buzz frequencies and amplitudes to assess pollen release by tomato plants(Solarium Ivcopersicum L.)and(ii)the recording of natural buzzes of Neotropical bees visiting tomato plants during pollination.The playback experiment indicates that although buzz frequency does affect pollen release,no optimal frequency exists for that.In addition,the recorded results of natural buzz-pollination reveal that buzz frequencies vary with bee genera and are not correlated with body size.Therefore,neither bees nor plants are tuned to optimal pollen release frequencies.Bee frequency of buzz-pollination is a likely consequence of the insect flight machinery adapted to reach higher accelerations,while flower plant response to buzz-pollination is the likely result of its pollen granular properties.展开更多
The changes in vibration, sound, and sound quality with changes in the driving voltage of a power seat motor from 12.5 to 14.5 V were measured and analyzed, which was used in real vehicles. BSR(buzz, squeak, rattle), ...The changes in vibration, sound, and sound quality with changes in the driving voltage of a power seat motor from 12.5 to 14.5 V were measured and analyzed, which was used in real vehicles. BSR(buzz, squeak, rattle), which occurs for the power seat mechanism during sliding operation, was also evaluated. In addition, the results were expressed in terms of sound quality metrics, which measure the RPM change and sound level versus voltage to analyze their statistical correlation. Furthermore, vibration measurement and analysis were conducted simultaneously to determine the noisiest conditions and the source of the noise. The changes in RPM and voltage of a motor, in addition to vibration and noise, were measured at the same time to determine how noise, RPM, and voltage are interrelated.展开更多
Pollen collection is necessary for bee survival and important for flowering plant reproduction, yet if and how pollen extraction motor routines are modified with experience is largely unknown. Here, we used an automat...Pollen collection is necessary for bee survival and important for flowering plant reproduction, yet if and how pollen extraction motor routines are modified with experience is largely unknown. Here, we used an automated reward and monitoring system to evaluate modification in a common pollen-extraction routine, floral sonication. Through a series of laboratory experiments with the bumblebee, Bombus impatiens, we examined whether variation in sonication frequency and acceleration is due to instrumental learning based on rewards, a fixed behavioral response to rewards, and/or a mechanical constraint. We first investigated whether bees could learn to adjust their sonication frequency in response to pollen rewards given only for specified frequency ranges and found no evidenee of instrumental learning. However, we found that absenee versus receipt of a pollen reward did lead to a predictable behavioral resp on se, which depe nded on bee size. Fin ally, we found some evide nee of mechanical con straints, in that flower mass affected sonication acceleration (but not frequency) through an interaction with bee size. In generalz larger bees showed more flexibility in sonication frequency and acceleration, potentially reflecting a size-based constraint on the range over which smaller bees can modify frequency and accelerati on. Overall our results show that although bees did not display instrumental learning of sonication frequency, their sonication motor routine is nevertheless flexible.展开更多
基金supported by National Natural Science Foundation of China (30570314)the Knowledge Innovation Program of Chinese Academy of Sciences (Grant No.KSCX2-YW-Z-027)
文摘Flowers that have heteromorphic stamens （heterantherous flowers） have intrigued many researchers ever since the phenomenon was discovered in the 19th century. The morphological differentiation in androecia has been suggested as a reflection of ＂labor division＂ in pollination in which one type of stamens attracts pollinators and satisfies their demand for pollen as food and the other satisfies the plant＇s need for safe gamete dispersal. The extent and patterns of stamen differentiation differ notably among taxa with heterantherous flowers. Seven species with heteromorphic stamens in three genera were sampled from Leguminosae and Melastomataceae, and the morphological difference of androecia, pollen content, pollen histochemistry and viability, pollen micro- morphology, as well as the main pollinators were examined and compared. Pollen number differs significantly between stamen sets of the same flower in most species investigated, and a correlation of pollen number and anther size was substantiated. Higher pollen viabilities were found in the long （pollinating） stamens of Senna alata （L.） Roxb. and S. bicapsularis （L.） Roxb. Dimorphic pollen exine ornamentation is reported here for the first time in Fordiophytonfaberi Stapf. The height of stigma and anther tips of the long stamens in natural conditions was proved to be highly correlated, supporting the hypothesis that they contact similar areas of the pollinator＇s body.
基金supported by the Natural Science Foundation of China(No.61074155)the Shaanxi Provincial Natural Science Foundation of China(No.2013JM015)
文摘Transonic rudder buzz responses based on the computational fluid dynamics or computational structural dynamics(CFD/CSD)loosely method are analyzed for a tailless flying wing unmanned aerial vehicle(UAV).The Reynolds-averaged Navier-Stokes(RANS)equations and finite element methods based on the detailed aerodynamic and structural model are established,in which the aerodynamic dynamic meshes adopt the unstructured dynamic meshes based on the combination of spring-based smoothing and local remeshing methods,and the lower-upper symmetric-Gauss-Seidel(LU-SGS)iteration and Harten-Lax-van Leer-Einfeldt-Wada(HLLEW)space discrete methods based on the shear stress transport(SST)turbulence model are used to calculate the aerodynamic force.The constraints of the rudder motions are fixed at the end of structural model of the flying wing UAV,and the structural geometric nonlinearities are also considered in the flying wing UAV with a high aspect ratio.The interfaces between structural and aerodynamic models are built with an exact match surface where load transferring is performed based on 3Dinterpolation.The flying wing UAV transonic buzz responses based on the aerodynamic structural coupling method are studied,and the rudder buzz responses and aileron,elevator and flap vibration responses caused by rudder motion are also investigated.The effects of attack,height,rotating angular frequency and Mach number under transonic conditions on the flying wing UAV rudder buzz responses are discussed.The results can be regarded as a reference for the flying wing UAV engineering vibration analysis.
文摘同学们,你们喜欢吃奶酪吗?本期,Abby和Jack围绕着奶酪展开了一段有趣的小故事,一起来看看吧!Real Cheese真正的奶酪Abby:I wish my parents would take me to Europe.Jack:Why do you want to go there?Abby:I loveEuropeanfood,especiallypizza.Jack:You don't need to go to Italy to eat pizza;you can eat it here.Abby:But I want to eat real Italian pizza with authentic(正宗的)European cheese on top!
基金support provided by the CAPES Foundation(Brazilian Ministry of Education)the National Council of Scientific and Technological Development(CNPq+1 种基金Brazilian Ministry of Science and Technology)the Minas Gerais State Foundation for Research Aid(FAPEMIG)were also greatly appreciated.
文摘Over 50 genera of bees release pollen from flower anthers using thoracic vibrations,a phenomenon known as buzz-pollination.The efficiency of this process is directly affected by the mechanical properties of the buzzes,namely the duration,amplitude,and frequency.Nonetheless,although the effects of the former two properties are well described,the role of buzz frequency on pollen release remains unclear.Furthermore,nearly all of the existing studies describing vibrational properties of natural buzz-pollination are limited to bumblebees(Bombus)and carpenter bees(Xvlocopa)constraining our current understanding of this behavior and its evolution.Therefore,we attempted to minimize this shortcoming by testing whether flower anthers exhibit optimal frequency for pollen release and whether bees tune their buzzes to match these(optimal)frequencies.If true,certain frequencies will trigger more pollen release and lighter bees will reach buzz frequencies closer to this optimum to compensate their smaller buzz amplitudes.Two strategies were used to test these hypotheses:(i)the use of(artificial)vibrational playbacks in a broad range of buzz frequencies and amplitudes to assess pollen release by tomato plants(Solarium Ivcopersicum L.)and(ii)the recording of natural buzzes of Neotropical bees visiting tomato plants during pollination.The playback experiment indicates that although buzz frequency does affect pollen release,no optimal frequency exists for that.In addition,the recorded results of natural buzz-pollination reveal that buzz frequencies vary with bee genera and are not correlated with body size.Therefore,neither bees nor plants are tuned to optimal pollen release frequencies.Bee frequency of buzz-pollination is a likely consequence of the insect flight machinery adapted to reach higher accelerations,while flower plant response to buzz-pollination is the likely result of its pollen granular properties.
基金supported by the research grant of AMPRIC & RIGCT in Kongju National University, Korea
文摘The changes in vibration, sound, and sound quality with changes in the driving voltage of a power seat motor from 12.5 to 14.5 V were measured and analyzed, which was used in real vehicles. BSR(buzz, squeak, rattle), which occurs for the power seat mechanism during sliding operation, was also evaluated. In addition, the results were expressed in terms of sound quality metrics, which measure the RPM change and sound level versus voltage to analyze their statistical correlation. Furthermore, vibration measurement and analysis were conducted simultaneously to determine the noisiest conditions and the source of the noise. The changes in RPM and voltage of a motor, in addition to vibration and noise, were measured at the same time to determine how noise, RPM, and voltage are interrelated.
文摘Pollen collection is necessary for bee survival and important for flowering plant reproduction, yet if and how pollen extraction motor routines are modified with experience is largely unknown. Here, we used an automated reward and monitoring system to evaluate modification in a common pollen-extraction routine, floral sonication. Through a series of laboratory experiments with the bumblebee, Bombus impatiens, we examined whether variation in sonication frequency and acceleration is due to instrumental learning based on rewards, a fixed behavioral response to rewards, and/or a mechanical constraint. We first investigated whether bees could learn to adjust their sonication frequency in response to pollen rewards given only for specified frequency ranges and found no evidenee of instrumental learning. However, we found that absenee versus receipt of a pollen reward did lead to a predictable behavioral resp on se, which depe nded on bee size. Fin ally, we found some evide nee of mechanical con straints, in that flower mass affected sonication acceleration (but not frequency) through an interaction with bee size. In generalz larger bees showed more flexibility in sonication frequency and acceleration, potentially reflecting a size-based constraint on the range over which smaller bees can modify frequency and accelerati on. Overall our results show that although bees did not display instrumental learning of sonication frequency, their sonication motor routine is nevertheless flexible.
