期刊文献+
共找到669篇文章
< 1 2 34 >
每页显示 20 50 100
Altitudinal Pattern of Plant Species Diversity in Shennongjia Mountains, Central China 被引量:46
1
作者 Chang-Ming ZHAO Wei-Lie CHEN +1 位作者 Zi-Qiang TIAN Zong-Qiang XIE 《Journal of Integrative Plant Biology》 SCIE CAS CSCD 2005年第12期1431-1449,共19页
One hundred and sixty plots, approximately every 100 m above sea level (a.s.1.) along an altitudinal gradient from 470 to 3 080 m a.s.1, at the southern and northern watershed of Mt. Shennongjia, China, were examine... One hundred and sixty plots, approximately every 100 m above sea level (a.s.1.) along an altitudinal gradient from 470 to 3 080 m a.s.1, at the southern and northern watershed of Mt. Shennongjia, China, were examined to determine the altitudinal pattern of plant species diversity. Mt. Shennongjia was found to have high plant species diversity, with 3 479 higher plants recorded. Partial correlation analysis and detrended canonical correspondence analysis (DCCA) based on plant species diversity revealed that altitude was the main factor affecting the spatial pattern of plant species diversity on Mt. Shennongjia and that canopy coverage of the arbor layer also had a considerable effect on plant species diversity. The DCCA based on species data of importance value further revealed that altitude gradient was the primary factor shaping the spatial pattern of plant species. In addition, the rule of the “mid-altitude bulge” was supported on Mt. Shennongjia. Plant species diversity was closely related to vegetation type and the transition zone usually had a higher diversity. Higher plant species diversity appeared in the mixed evergreen and deciduous broadleaved forest zone (900-1500 m a.s.1.) and its transition down to evergreen broadleaved forest zone or up to deciduous broadleaved forest zone. The largest plant species diversity in whole communities on Mt. Shennongjia lay at approximately 1 200 m a.s.1. Greatest tree diversity, shrub diversity, and grass diversity was found at approximately 1 500, 1 100, and 1 200 m a.s.l., respectively. The southern watershed showed higher plant species diversity than the northern watershed, with maximum plant species diversity at a higher altitude in the southern watershed than the northern watershed. These results indicate that Mt. Shennongjia shows characteristics of a transition region. The relationship between the altitudinal pattern of plant species diversity and the vegetation type in eastern China are also discussed and a hypothesis about the altitudinal patter 展开更多
关键词 altitudinal pattern mid-altitude bulge Mt. Shennongjia plant species diversity.
原文传递
激光辐照下充压柱壳结构变形的数值模拟 被引量:27
2
作者 赵剑衡 章冠人 刘绪发 《高压物理学报》 CAS CSCD 北大核心 1996年第4期262-268,共7页
激光辐照下充压柱壳局部受热,最终导致充压柱壳上激光加载区发生鼓包和爆裂现象。作者用有限元方法数值模拟了激光辐照下柱壳的变形,计算出的应力、应变场显示光斑中心处是最有可能发生爆裂的地方,结论与实验结果相符。同时,根据计... 激光辐照下充压柱壳局部受热,最终导致充压柱壳上激光加载区发生鼓包和爆裂现象。作者用有限元方法数值模拟了激光辐照下柱壳的变形,计算出的应力、应变场显示光斑中心处是最有可能发生爆裂的地方,结论与实验结果相符。同时,根据计算结果。 展开更多
关键词 有限元法 激光 热弹塑性 壳结构 弹塑性力学
下载PDF
无缝钢管分层缺陷的鉴定 被引量:14
3
作者 田党 李秀琴 +2 位作者 许秋龙 侯伟 修雪峰 《钢管》 CAS 2013年第6期9-13,共5页
连铸圆管坯轧制无缝钢管出现的分层缺陷,是钢管壁厚中间区域和靠近内表面区域存在着异常夹杂物所致,这些异常夹杂物是钢液在冶炼和浇注过程中的脱氧产物,以及卷入钢液中的熔渣、被浸蚀的耐火材料及保护渣。使用超声波测厚仪或超声波探... 连铸圆管坯轧制无缝钢管出现的分层缺陷,是钢管壁厚中间区域和靠近内表面区域存在着异常夹杂物所致,这些异常夹杂物是钢液在冶炼和浇注过程中的脱氧产物,以及卷入钢液中的熔渣、被浸蚀的耐火材料及保护渣。使用超声波测厚仪或超声波探伤仪可以发现这种缺陷;在有分层缺陷的钢管内表面,往往伴有许多鼓包和翘皮;连铸圆管坯生产厂家应该保证连铸圆管坯轧制的无缝钢管无冶炼和浇铸因素引起的分层缺陷。 展开更多
关键词 连铸圆管坯 无缝钢管 分层缺陷 夹杂物 鼓包 翘皮
下载PDF
毛囊Bulge细胞培养与生物学特性的研究 被引量:9
4
作者 张艺 杨恬 《第三军医大学学报》 CAS CSCD 北大核心 2004年第16期1499-1500,共2页
目的 探讨体外培养毛囊Bulge细胞的生物学性质。方法 采用一步消化法 ,显微分割毛囊Bulge区进行原代培养 ,观察细胞的形态特征、生长状况以及表达特性。结果 原代培养的第 2天便可见细胞生长 ,并表现出很强的增殖潜能 ,其生长期可达... 目的 探讨体外培养毛囊Bulge细胞的生物学性质。方法 采用一步消化法 ,显微分割毛囊Bulge区进行原代培养 ,观察细胞的形态特征、生长状况以及表达特性。结果 原代培养的第 2天便可见细胞生长 ,并表现出很强的增殖潜能 ,其生长期可达两周以上 ;光镜下表现出原始细胞形态特征 ,培养早期细胞能强表达K19和 β1 integrin ,并随培养时间延长呈下降趋势 ;原位染色亦可见 ,K19阳性细胞集中表达于毛囊Bulge区。结论 体外培养的毛囊Bulge细胞在形态、生长状况和标志物表达上都表现出幼稚细胞的性质 。 展开更多
关键词 毛囊 bulge 培养
下载PDF
某热电厂20G钢锅炉水冷壁管鼓包的原因 被引量:9
5
作者 汤鹏杰 姜勇 +1 位作者 巩建鸣 荣冬松 《机械工程材料》 CAS CSCD 北大核心 2016年第1期101-105,共5页
采用拉伸试验、金相分析、热力学模拟计算和蠕变试验等方法对某热电厂20G钢锅炉水冷壁管产生鼓包的原因进行分析。结果表明:管内壁结垢引起水冷壁管超温是产生鼓包的原因;对垢层厚度与管壁温度的关系进行热力学计算,并结合金相分析确... 采用拉伸试验、金相分析、热力学模拟计算和蠕变试验等方法对某热电厂20G钢锅炉水冷壁管产生鼓包的原因进行分析。结果表明:管内壁结垢引起水冷壁管超温是产生鼓包的原因;对垢层厚度与管壁温度的关系进行热力学计算,并结合金相分析确定产生鼓包的超温温度在650~723℃之间。 展开更多
关键词 鼓包 结垢 超温
下载PDF
一段乙烯裂解炉炉管的失效分析 被引量:9
6
作者 张悦 《压力容器》 2013年第6期32-38,共7页
针对某公司SL-Ⅰ型裂解炉鼓胀炉管,开展了失效原因分析工作。对失效炉管进行了化学成分分析、热模拟试验、光学/电子金相观察、EDS能谱试验等,结果表明:炉管鼓包变形不均匀,炉管材料发生了蠕变损伤;内壁局部渗碳严重,内壁最大碳含量2.8... 针对某公司SL-Ⅰ型裂解炉鼓胀炉管,开展了失效原因分析工作。对失效炉管进行了化学成分分析、热模拟试验、光学/电子金相观察、EDS能谱试验等,结果表明:炉管鼓包变形不均匀,炉管材料发生了蠕变损伤;内壁局部渗碳严重,内壁最大碳含量2.89%,渗碳层厚度约2.8 mm,据推测局部温度超过1100℃,该炉管不均匀鼓包变形失效系由于局部超温引起的。 展开更多
关键词 裂解炉管 鼓包 超温 失效
下载PDF
固体颗粒介质的管材成形新工艺试验研究 被引量:5
7
作者 赵长财 李晓丹 +1 位作者 王银思 董国疆 《塑性工程学报》 EI CAS CSCD 北大核心 2006年第3期56-59,共4页
介绍了一种新的成形技术,即固体颗粒介质的管材成形新工艺,并通过试验对该工艺的工艺过程、成形特点进行了论述。试验结果表明,该新成形技术与传统其他常规工艺相比,具有模具成本低、零件尺寸精度高、表面质量好的特点。该工艺的提出为... 介绍了一种新的成形技术,即固体颗粒介质的管材成形新工艺,并通过试验对该工艺的工艺过程、成形特点进行了论述。试验结果表明,该新成形技术与传统其他常规工艺相比,具有模具成本低、零件尺寸精度高、表面质量好的特点。该工艺的提出为解决复杂形状、高强度、低塑性、难变形管材精密成形提供了一条有效途径。 展开更多
关键词 固体颗粒介质 胀形 管材 钢球
下载PDF
碎石桩复合地基有限元分析 被引量:8
8
作者 邓楚键 郑颖人 杨波 《后勤工程学院学报》 2007年第4期56-59,共4页
应用有限元对碎石桩复合地基进行了数值模拟,求取了碎石桩复合地基的极限荷载,分析了复合地基的受力状况,探讨了碎石桩的鼓胀破坏过程及规律。数值分析结果表明增量加载有限元法是分析碎石桩地基的一种很有效的手段,它在获得极限载... 应用有限元对碎石桩复合地基进行了数值模拟,求取了碎石桩复合地基的极限荷载,分析了复合地基的受力状况,探讨了碎石桩的鼓胀破坏过程及规律。数值分析结果表明增量加载有限元法是分析碎石桩地基的一种很有效的手段,它在获得极限载荷的同时,能够详尽地阐述碎石桩复合地基的受力状况及碎石桩的鼓胀特性。 展开更多
关键词 有限元 碎石桩复合地基 鼓胀
下载PDF
颈椎后伸过程中黄韧带突入椎管距离动态变化的实验研究 被引量:6
9
作者 朱庆三 顾锐 孙焕伟 《中国脊柱脊髓杂志》 CAS CSCD 2003年第2期88-91,共4页
目的:观察颈椎各节段黄韧带突入椎管的距离与后伸角度的关系,探讨颈椎后伸过程中黄韧带突入椎管的动态变化.方法:离体正常C2~T1节段成人脊柱标本14具,去除椎管内脊髓及硬膜,在各节段黄韧带内壁处放置自行研制的电阻应变式位移传感器探... 目的:观察颈椎各节段黄韧带突入椎管的距离与后伸角度的关系,探讨颈椎后伸过程中黄韧带突入椎管的动态变化.方法:离体正常C2~T1节段成人脊柱标本14具,去除椎管内脊髓及硬膜,在各节段黄韧带内壁处放置自行研制的电阻应变式位移传感器探针并将输出信号连接于自动应变仪,在逐渐增大颈椎后伸角度的过程中读取各节段黄韧带突入椎管距离的数据,经统计处理描记出各节段黄韧带突入椎管距离与颈椎后伸角度之间的关系曲线.结果:过伸位黄韧带突入椎管距离:C5-6>C4-5>C6-7>C3-4>C7-T1>C2-3;C2-3至C7-T1六个节段黄韧带突入椎管距离与颈椎后伸角度之间的关系曲线均为'S'形;曲线上升过程中斜率由小变大的一点所对应的角度约为15°~33°,随黄韧带节段下降角度逐渐增大.结论:过伸位黄韧带突入椎管距离以C5-6为最大,其上、下方节段突入距离逐渐变小;用各节段黄韧带突入椎管距离与颈椎后伸角度关系的'S'形曲线解释了黄韧带在颈椎后伸过程中形态的动态变化. 展开更多
关键词 颈椎 黄韧带 生物力学 突出 后伸 角度
下载PDF
中厚板瓢曲缺陷的分析与控制 被引量:7
10
作者 陈曦 罗永恒 武辉 《柳钢科技》 2013年第2期11-13,共3页
柳钢中厚板厂钢板瓢曲的影响因素:终轧温度控制过低、精轧轧制过程中板型控制不良、热应力、矫直机、内应力,介绍实施的成分调整、提高钢板的终轧温度、合理分配精轧道次、优化冷却、合理应用3台矫直机等措施及其效果。
关键词 中厚板 瓢曲 终轧温度 板型控制 热应力 内应力 矫直
下载PDF
Large conversion of energy in dielectric elastomers by electromechanical phase transition 被引量:4
11
作者 Tong-Qing Lu Zhi-Gang Suo 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 2012年第4期1106-1114,共9页
When air is pumped in, a tubular balloon initially inflates slightly and homogeneously. A short section of the balloon then forms a bulge, which coexists with the unbulged section of the balloon. As more air is pumped... When air is pumped in, a tubular balloon initially inflates slightly and homogeneously. A short section of the balloon then forms a bulge, which coexists with the unbulged section of the balloon. As more air is pumped in, the bulged section elongates at the expense of the unbulged section, until the entire balloon is bulged. The phenomenon is analogous to the liquid-to-vapor phase transition. Here we study the bulging transition in a dielectric elastomer tube as air is pumped into the balloon and a voltage is applied through the thickness of the membrane. We formulate the condition for coexistent budged and unbulged sections, and identify allowable states set by electrical breakdown and mechanical rupture. We find that the bulging transition dramatically amplifies electromechanical energy conversion. Energy converted in an electromechanical cycle consisting of unbulged and bulged states is thousands of times that in an electromechanical cycle consisting of only unbulged states. 展开更多
关键词 Dielectric elastomer bulge Electromechanical energy conversion. Tubular balloon Electromechanical transition
下载PDF
Clinical study of transcatheter occlusion in treating ventricular septal defect combined with right coronary cusp bulge 被引量:4
12
作者 Wei Ji Zhifang Zhang +5 位作者 Wenchuo Zhao Jie Shen Lijun Fu Lin Shi Yiwei Chen Fen Li 《Journal of Interventional Medicine》 2018年第4期205-211,共7页
Background: Perimembranous ventricular septal defect combined with right coronary cusp bulge generally should be treated with surgical thoracotomy, owing to the potential aortic regurgitation. However, the minimally i... Background: Perimembranous ventricular septal defect combined with right coronary cusp bulge generally should be treated with surgical thoracotomy, owing to the potential aortic regurgitation. However, the minimally invasive method of transcatheter closure has always attracted the attention of cardiologists and patients. The present study aimed to apply transcatheter occlusion in treating ventricular septal defect with right coronary cusp bulge and further evaluate the clinical effect through follow-up. Materials and methods: A total of 40 children diagnosed as having a ventricular septal defect with right coronary cusp bulge, examined using transthoracic echocardiography and cardiovascular angiography, were enrolled in this study. The ventricular septal defects were closed by placing occluders through transcatheter occlusion treatment. During the operation process, the children underwent angiography and transthoracic echocardiography examinations to check the position of the occlude and the extent of aortic regurgitation. The influence of occlusion on the conduction system was evaluated using a surface electrocardiogram. The children were followed up after their procedures. Results: All 40 patients were immediately and successfully occluded. Three patients with filament residual shunts were observed during the operations. No major surgical complications occurred during the perioperative period. During the follow-up period, the positions of all the occluders were good, the residual shunts in the three patients disappeared, and no new or aggravated aortic regurgitation occurred. Electrocardiogram did not reveal any atrioventricular blocks. Only one patient suffered from an incomplete right bundle branch block. Conclusions: Children diagnosed with ventricular septal defect combined with right coronary cusp bulge could be considered for transcatheter occlusion. With appropriate indications and methods, the effect may be favorable. 展开更多
关键词 aortic regurgitation RIGHT CORONARY CUSP bulge TRANSCATHETER OCCLUSION ventricular septal defect
下载PDF
Recent progress in hair follicle stem cell markers and their regulatory roles
13
作者 Yi-Zhan Xing Hai-Ying Guo +1 位作者 Fei Xiang Yu-Hong Li 《World Journal of Stem Cells》 SCIE 2024年第2期126-136,共11页
Hair follicle stem cells(HFSCs)in the bulge are a multipotent adult stem cell population.They can periodically give rise to new HFs and even regenerate the epidermis and sebaceous glands during wound healing.An increa... Hair follicle stem cells(HFSCs)in the bulge are a multipotent adult stem cell population.They can periodically give rise to new HFs and even regenerate the epidermis and sebaceous glands during wound healing.An increasing number of biomarkers have been used to isolate,label,and trace HFSCs in recent years.Considering more detailed data from single-cell transcriptomics technology,we mainly focus on the important HFSC molecular markers and their regulatory roles in this review. 展开更多
关键词 Hair follicle stem cells bulge Secondary hair germ Marker Single-cell RNA-sequencing
下载PDF
从三焦理论辨治肝硬化腹水 被引量:2
14
作者 王宁 吕文良 《辽宁中医杂志》 CAS 2023年第10期66-68,共3页
肝硬化腹水是肝硬化发展至失代偿期的最常见并发症之一,属中医“鼓胀”范畴,以腹部胀大如鼓、皮色苍黄、脉络显露为主要症状。中医药辨治腹水有着悠久的历史,在有效缓解患者临床症状、减少药物副作用、提高患者生活质量等方面显示出极... 肝硬化腹水是肝硬化发展至失代偿期的最常见并发症之一,属中医“鼓胀”范畴,以腹部胀大如鼓、皮色苍黄、脉络显露为主要症状。中医药辨治腹水有着悠久的历史,在有效缓解患者临床症状、减少药物副作用、提高患者生活质量等方面显示出极大的优势,文章从“三焦辨证”理论论治腹水,以期为临床辨治肝硬化腹水提供新的思路。 展开更多
关键词 肝硬化腹水 鼓胀 三焦辨证
下载PDF
导流支板精铸件缺陷成因分析及改善对策
15
作者 尹冬梅 牛建平 杜阳 《铸造工程》 2024年第4期5-7,共3页
导流支板为壁厚不均的空心、扁形、薄壁大平面复杂结构熔模精铸件,经常出现鼓包、疏松、缩孔、夹渣等铸造缺陷,通过在蜡模大平面增加工艺筋、制壳捆绑镍铁丝、模壳内腔灌砂等方式增加型壳强度,并采用ProCAST软件模拟优化浇注系统以及合... 导流支板为壁厚不均的空心、扁形、薄壁大平面复杂结构熔模精铸件,经常出现鼓包、疏松、缩孔、夹渣等铸造缺陷,通过在蜡模大平面增加工艺筋、制壳捆绑镍铁丝、模壳内腔灌砂等方式增加型壳强度,并采用ProCAST软件模拟优化浇注系统以及合金锭料和真空熔炼浇注等措施实施,解决了铸件存在的鼓包、疏松、缩孔、夹渣等缺陷,改善后铸件质量满足技术要求。 展开更多
关键词 熔模铸造 模拟 疏松 缩孔 鼓包
下载PDF
连铸圆管坯穿管内鼓包原因分析与控制 被引量:6
16
作者 时东生 王朝阳 +2 位作者 贺建哲 王智轶 巩文旭 《天津冶金》 CAS 2013年第A01期30-32,共3页
针对由连铸坯生产N80级石油套管时钢管内表面出现的鼓包缺陷问题,采用金相显微镜和扫描电镜对其进行了研究分析,发现鼓包缺陷内部存在聚集的大型夹杂物。鼓包缺陷的形成是在穿管深加工过程中管壁不断减薄,夹杂物逐渐外露,内表皮外翻所... 针对由连铸坯生产N80级石油套管时钢管内表面出现的鼓包缺陷问题,采用金相显微镜和扫描电镜对其进行了研究分析,发现鼓包缺陷内部存在聚集的大型夹杂物。鼓包缺陷的形成是在穿管深加工过程中管壁不断减薄,夹杂物逐渐外露,内表皮外翻所致。鼓包处的夹杂物是以铝酸钙组分为主,还存在少量结晶器保护渣和水口侵蚀后的剥落物。聚集的大型夹杂物与钢水的纯净度、下水口侵蚀和结晶器液面波动有关。 展开更多
关键词 连铸 圆管坯 穿管 鼓包 夹杂物
下载PDF
HX_D1B型机车蓄电池常见故障原因分析及处理 被引量:6
17
作者 朱琳 田川 +1 位作者 韩春阳 张会云 《铁道机车与动车》 2016年第8期40-42,共3页
HX_D1B型电力机车运用过程中经常发生蓄电池鼓包、漏液及馈电等故障,通过对影响蓄电池工作的因素进行查找、原因进行分析,制定相应的改进措施来降低蓄电池故障的发生。
关键词 HXD1B型机车 蓄电池 鼓包 漏液
原文传递
天然气最终脱硫槽筒体开裂及封头鼓包原因分析
18
作者 史伟 于永旺 +1 位作者 杨莉 王丽娜 《石油化工腐蚀与防护》 CAS 2024年第4期47-51,共5页
天然气最终脱硫槽在服役时筒体部位发生开裂并引发起火事故,利用化学分析、金相检验、力学性能测试及断口形貌分析等手段对筒体开裂和封头鼓包的原因进行了分析。分析结果表明:在设备服役过程中,筒体和封头内部发生了氢腐蚀现象,进而使... 天然气最终脱硫槽在服役时筒体部位发生开裂并引发起火事故,利用化学分析、金相检验、力学性能测试及断口形貌分析等手段对筒体开裂和封头鼓包的原因进行了分析。分析结果表明:在设备服役过程中,筒体和封头内部发生了氢腐蚀现象,进而使得材料内部产生了孔洞,导致材料强度下降,冲击韧性变差,最终在筒体外表面萌生裂纹造成筒体开裂;封头处产生的孔洞数量少于筒体开裂处,且本身壁厚大于筒体,在筒体开裂后内部压力减小,造成封头鼓包。 展开更多
关键词 脱硫槽 氢腐蚀 鼓包 临氢环境
下载PDF
摆臂类零件工艺分析与优化
19
作者 成振坤 《模具工业》 2024年第6期33-36,共4页
针对摆臂类零件的凸包和翻孔在成形时易开裂的问题,提出了摆臂类零件改进设计的方法。首先对复杂结构的摆臂类零件常见的冲压工艺缺陷进行分析,通过CAE分析结合实物样件对零件设计进行验证;其次对于凸包区域的开裂问题,根据零件装配要求... 针对摆臂类零件的凸包和翻孔在成形时易开裂的问题,提出了摆臂类零件改进设计的方法。首先对复杂结构的摆臂类零件常见的冲压工艺缺陷进行分析,通过CAE分析结合实物样件对零件设计进行验证;其次对于凸包区域的开裂问题,根据零件装配要求,在尽可能减少修模量的前提下,通过调整圆角半径和拔模角度改善凸包区域的成形缺陷;对于对向翻孔开裂的问题,将弹性元件的压力作为优化目标,确定最佳的圆角半径、翻边高度和拔模角度参数组合,此外,通过增加局部导向结构解决弹性元件压入摆臂时产生的刮痕缺陷;最后以试制方式加工出相应状态的样件,对不同的优化方案进行验证。结果表明:对于摆臂类零件的优化,若CAE分析凸包位置存在开裂风险且减薄率不大于28%时,圆角半径增大不超过2 mm、拔模角度增加不超过5°;增大对向翻孔的压料区域和压料力,并在结构上增加相应的倒角可提升零件的压装性能。 展开更多
关键词 摆臂 缺陷 凸包 对向翻孔 优化 性能
下载PDF
Ballistic performance of spherical fragments penetrating PCrNi3MoV target plates
20
作者 Dou Hong Wenbin Li +3 位作者 Yu Zheng Yiming Li Ning Jiang Kebin Zhang 《Defence Technology(防务技术)》 SCIE EI CAS CSCD 2024年第3期295-307,共13页
PCrNi3MoV steel is a medium-carbon,low-alloy quenched and tempered steel that finds its applications in military gun barrels due to the high wear resistance and ablation resistance.To study the penetration and failure... PCrNi3MoV steel is a medium-carbon,low-alloy quenched and tempered steel that finds its applications in military gun barrels due to the high wear resistance and ablation resistance.To study the penetration and failure modes of PCrNi3MoV plates impacted by tungsten spheres,tungsten spheres of various diameters(5 mm,8 mm,and 10 mm)were used to impact PCrNi3MoV steel plates with thicknesses of 6 mm,9 mm,and 14 mm.The penetration performance of the spheres was analyzed for different velocities,and the ultimate penetration velocity of the plate was obtained.It was found that the primary failure modes of the PCrNi3MoV plate were compression pitting failure and shear failure.Using the dimensional analysis method,a relationship between the bulge height of the steel plate and the fragment velocity,an equation for the ultimate penetration velocity,and a relationship between the target penetration energy and the fragment velocity were obtained.Then,a projectile-target action index was proposed to describe the process of tungsten spheres with different velocities impacting target plates.The results suggested that under the same thickness of the target plate,a larger-diameter fragment required more kinetic energy to obtain the same ultimate penetration effect as a smaller-diameter fragment.The equations obtained through dimensional analysis predicted values that agreed well with experimental values,indicating that these equations can be applied to engineering applications. 展开更多
关键词 Impact damage Ultimate penetration velocity bulge height Target penetration energy Failure modes
下载PDF
上一页 1 2 34 下一页 到第
使用帮助 返回顶部