The petrophysical property of mudstone often transforms from ductile to brittle in the process of burial-uplift. The deformation mechanism of fault in brittle and ductile mudstone caprock is different, which leads to ...The petrophysical property of mudstone often transforms from ductile to brittle in the process of burial-uplift. The deformation mechanism of fault in brittle and ductile mudstone caprock is different, which leads to the formation of different types of fault zone structure. Different methods are required to evaluate the sealing mechanism of those fault zones. Based on the caprock deformation mechanism, fault sealing mechanism, quantitative evaluation method of vertical fault sealing capacity is put forward in this study. Clay smear is formed in the process of plastic deformation and its continuity controls the sealing capacity of fault. The outcrop and oil field data have confirmed that when sealing parameter SSF is less than 4–7, the clay smear becomes discontinuous and then oil and gas go through the caprock and migrate vertically. Quantities of fractures are formed in mudstone in the process of brittle deformation. The fracture density increases with the increase of the fault displacement. When the fractures are connected, oil and gas go through the caprock and migrate vertically. The connectivity of fault depends on the displacement and the thickness of caprock. On the basis of the above, a method is put forward to quantify the connectivity of fault with the juxtaposition thickness of caprock after faulting. The research on the juxtaposition thickness of caprock after faulting of the member II of Dongying Formation in Nanpu depression and the distribution of oil and gas indicates when the juxtaposition thickness of caprock is less than 96.2 m, the fault becomes leaking vertically. In the lifting stage, with the releasing and unloading of the stress, the caprock becomes brittle generally and then forms through going fault which will lead to a large quantity of oil and gas migrate vertically.展开更多
The brittle–ductile transition(BDT) widely exists in the manufacturing with extremely small deformation scale, thermally assisted machining, and high-speed machining. This paper reviews the BDT in extreme manufacturi...The brittle–ductile transition(BDT) widely exists in the manufacturing with extremely small deformation scale, thermally assisted machining, and high-speed machining. This paper reviews the BDT in extreme manufacturing. The factors affecting the BDT in extreme manufacturing are analyzed, including the deformation scale and deformation temperature induced brittle-to-ductile transition, and the reverse transition induced by grain size and strain rate. A discussion is arranged to explore the mechanisms of BDT and how to improve the machinability based on the BDT. It is proposed that the mutual transition between brittleness and ductility results from the competition between the occurrence of plastic deformation and the propagation of cracks. The brittleness or ductility of machined material should benefit a specific manufacturing process, which can be regulated by the deformation scale, deformation temperature and machining speed.展开更多
Highly precise (σ ~1 mm) temporal deformation measurements are taken across the Xianshuihe fault from two pairs of continuous GPS stations straddling the fault. Baseline vector changes of the two pairs of stations sh...Highly precise (σ ~1 mm) temporal deformation measurements are taken across the Xianshuihe fault from two pairs of continuous GPS stations straddling the fault. Baseline vector changes of the two pairs of stations show clearly the difference in deformation behavior between the Qianning and Daofu segments of the fault: the former deforms steadily, and the latter deforms with a strong transient component. The transient deformation across the Daofu segment is possibly related to its irregular geometry, where the fault splits into two branches, that is, the east and west branches. An attempt is made to interpret the baseline vector changes using a kinematic fault model composed of a brittle layer in the upper crust, a ductile layer in the lower crust, and a transition zone in between. The slip in the transition zone of the south segment of the Xianshuihe fault is steady. The slips in the transition zones of the north and Daofu segments of the Xianshuihe fault, however, are not steady, and the average slip rates there are higher than that of the south segment. The difference in deformation behavior is probably associated with the rheological properties of the fault interface, suggesting that the overall fault strength of the south segment is greater than those of the north and Daofu segments, corresponding to longer earthquake recurrence time.展开更多
Structural network studies could give appropriate opportunities to understanding structural/hydrothermal events,transportation of ore-forming fluids and water/rock interaction process.Four structural deformation/hydro...Structural network studies could give appropriate opportunities to understanding structural/hydrothermal events,transportation of ore-forming fluids and water/rock interaction process.Four structural deformation/hydrothermal events have been identified in the Jiaojia fault zone according to microtexture and deformation of quartz and feldspars.Plagioclase experienced ductile deformation period with bended polysynthetic twin stripes(>450℃)in the early stage,followed by K-feldspar alteration period with ductile-brittle deformation and subgrain rotation recrystallization of quartz(380-450℃).Then,sericitization period occurred extensive ductile-brittle deformation(350-420℃)and extensive subgrain rotation recrystallization with a little bulging recrystallization in quartz.In the last,gold precipitation-related pyrite-sericite-quartz alteration was dominated by brittle deformation(300-380℃)and total bulging recrystallization of quartz.From the K-feldspar alteration zone and sericitization zone to pyrite-sericitequartz alteration zone,fractal dimension values of dynamically recrystallized quartz grains increase from 1.07 and 1.24 to 1.32,the calculated paleo strain rate values of dynamically recrystallized quartz range from 10^-10^.7(380℃)-10^-9.6(450℃)and 10^-9.3(350℃)-10^-8.2(420℃)to 10^-9.5(300℃)-10^-8.0(380℃),and the paleo differential stress values increase from 36.9 and 39.3,to 121.3 MPa.The increase of fractal dimension values and decrease of grain size from pyrite-sericite-quartz alteration zone and sericitization zone to K-feldspar alteration zone decreased average water/rock ratio values,which could lead to different acidity and redox conditions of ore-forming fluids and mineralization differences.Two kinds of orecontrolling fractures have been distinguished which include the gentle dip types(18°-50°)with NW(315°-355°)and SW(180°-235°)dip hosting No.Ⅰorebodies and the steep dip types(74°-90°)with NE(45°-85°)and SE(95°-165°)dip hosting No.Ⅲorebodies.These faults/fractures cros展开更多
基金financially supported by the National Natural Science Foundation of China (Nos. U1562214, 41702156, 41272151)the National Science and Technology Major Project (No. 2016ZX05003-002)
文摘The petrophysical property of mudstone often transforms from ductile to brittle in the process of burial-uplift. The deformation mechanism of fault in brittle and ductile mudstone caprock is different, which leads to the formation of different types of fault zone structure. Different methods are required to evaluate the sealing mechanism of those fault zones. Based on the caprock deformation mechanism, fault sealing mechanism, quantitative evaluation method of vertical fault sealing capacity is put forward in this study. Clay smear is formed in the process of plastic deformation and its continuity controls the sealing capacity of fault. The outcrop and oil field data have confirmed that when sealing parameter SSF is less than 4–7, the clay smear becomes discontinuous and then oil and gas go through the caprock and migrate vertically. Quantities of fractures are formed in mudstone in the process of brittle deformation. The fracture density increases with the increase of the fault displacement. When the fractures are connected, oil and gas go through the caprock and migrate vertically. The connectivity of fault depends on the displacement and the thickness of caprock. On the basis of the above, a method is put forward to quantify the connectivity of fault with the juxtaposition thickness of caprock after faulting. The research on the juxtaposition thickness of caprock after faulting of the member II of Dongying Formation in Nanpu depression and the distribution of oil and gas indicates when the juxtaposition thickness of caprock is less than 96.2 m, the fault becomes leaking vertically. In the lifting stage, with the releasing and unloading of the stress, the caprock becomes brittle generally and then forms through going fault which will lead to a large quantity of oil and gas migrate vertically.
基金support from the National Natural Science Foundation of China (Grant No. 51835004)。
文摘The brittle–ductile transition(BDT) widely exists in the manufacturing with extremely small deformation scale, thermally assisted machining, and high-speed machining. This paper reviews the BDT in extreme manufacturing. The factors affecting the BDT in extreme manufacturing are analyzed, including the deformation scale and deformation temperature induced brittle-to-ductile transition, and the reverse transition induced by grain size and strain rate. A discussion is arranged to explore the mechanisms of BDT and how to improve the machinability based on the BDT. It is proposed that the mutual transition between brittleness and ductility results from the competition between the occurrence of plastic deformation and the propagation of cracks. The brittleness or ductility of machined material should benefit a specific manufacturing process, which can be regulated by the deformation scale, deformation temperature and machining speed.
基金the National Basic Research Program of China (Grant No. 2004CB418403)
文摘Highly precise (σ ~1 mm) temporal deformation measurements are taken across the Xianshuihe fault from two pairs of continuous GPS stations straddling the fault. Baseline vector changes of the two pairs of stations show clearly the difference in deformation behavior between the Qianning and Daofu segments of the fault: the former deforms steadily, and the latter deforms with a strong transient component. The transient deformation across the Daofu segment is possibly related to its irregular geometry, where the fault splits into two branches, that is, the east and west branches. An attempt is made to interpret the baseline vector changes using a kinematic fault model composed of a brittle layer in the upper crust, a ductile layer in the lower crust, and a transition zone in between. The slip in the transition zone of the south segment of the Xianshuihe fault is steady. The slips in the transition zones of the north and Daofu segments of the Xianshuihe fault, however, are not steady, and the average slip rates there are higher than that of the south segment. The difference in deformation behavior is probably associated with the rheological properties of the fault interface, suggesting that the overall fault strength of the south segment is greater than those of the north and Daofu segments, corresponding to longer earthquake recurrence time.
基金the National Key Research and Development Program(No.2016YFC0600105)the National Natural Science Foundation of China(No.41672094).
文摘Structural network studies could give appropriate opportunities to understanding structural/hydrothermal events,transportation of ore-forming fluids and water/rock interaction process.Four structural deformation/hydrothermal events have been identified in the Jiaojia fault zone according to microtexture and deformation of quartz and feldspars.Plagioclase experienced ductile deformation period with bended polysynthetic twin stripes(>450℃)in the early stage,followed by K-feldspar alteration period with ductile-brittle deformation and subgrain rotation recrystallization of quartz(380-450℃).Then,sericitization period occurred extensive ductile-brittle deformation(350-420℃)and extensive subgrain rotation recrystallization with a little bulging recrystallization in quartz.In the last,gold precipitation-related pyrite-sericite-quartz alteration was dominated by brittle deformation(300-380℃)and total bulging recrystallization of quartz.From the K-feldspar alteration zone and sericitization zone to pyrite-sericitequartz alteration zone,fractal dimension values of dynamically recrystallized quartz grains increase from 1.07 and 1.24 to 1.32,the calculated paleo strain rate values of dynamically recrystallized quartz range from 10^-10^.7(380℃)-10^-9.6(450℃)and 10^-9.3(350℃)-10^-8.2(420℃)to 10^-9.5(300℃)-10^-8.0(380℃),and the paleo differential stress values increase from 36.9 and 39.3,to 121.3 MPa.The increase of fractal dimension values and decrease of grain size from pyrite-sericite-quartz alteration zone and sericitization zone to K-feldspar alteration zone decreased average water/rock ratio values,which could lead to different acidity and redox conditions of ore-forming fluids and mineralization differences.Two kinds of orecontrolling fractures have been distinguished which include the gentle dip types(18°-50°)with NW(315°-355°)and SW(180°-235°)dip hosting No.Ⅰorebodies and the steep dip types(74°-90°)with NE(45°-85°)and SE(95°-165°)dip hosting No.Ⅲorebodies.These faults/fractures cros
