In the current study, the effects of a combined application between micro-vortex generator and boundary layer suction on the flow characteristics of a high-load compressor cascade are investigated. The micro-vortex ge...In the current study, the effects of a combined application between micro-vortex generator and boundary layer suction on the flow characteristics of a high-load compressor cascade are investigated. The micro-vortex generator with a special configuration and the longitudinal suction slot are adopted. The calculated results show that a reverse flow region, which is considered the main reason for occurring stall at 7.9° incidence, grows and collapses rapidly near the leading edge and leads to two critical points occurring on the end-wall with the increasing incidence in the baseline. As the micro-vortex generator is introduced in the baseline cascade, the corner separation is switched to a trailing edge separation by the thrust from the induced vortex. Meanwhile, the occurrence of failure is delayed due to the mixed low energy fluid and main flow. The synergistic effects between the micro-vortex generator and the boundary layer suction on the performance of the cascade are superior to the baseline at all the incidence conditions before the occurrence of failure, and the sudden deterioration of the cascade occurs at 10.3° incidence. The optimal results show that the farther upstream suction position, the lower total pressure loss of the cascade with vortex generator at the near stall condition. Moreover, the induced vortex with a leg can migrate the accumulated low energy fluid backward to delay the occurrence of stall.展开更多
This paper presents a brief summary of the three development stages of investigation on the transpiration cooling and its control for aircraft, missiles and electromagnetic gun, then the control problem of the distrib...This paper presents a brief summary of the three development stages of investigation on the transpiration cooling and its control for aircraft, missiles and electromagnetic gun, then the control problem of the distributed parameters system with a moving boundary is derived. It introduces the mathematical model of the transpiration cooling control, its control characteristics, and the present situation of the experimental and theoretical study on this problem. This paper also describes the main study results and the existing problems. The prospective application is also reported. The major references in every developing stage are listed systematically for further study.展开更多
基金co-supported by the National Natural Science Foundation of China(Grants Nos.51576162 and 51536006)
文摘In the current study, the effects of a combined application between micro-vortex generator and boundary layer suction on the flow characteristics of a high-load compressor cascade are investigated. The micro-vortex generator with a special configuration and the longitudinal suction slot are adopted. The calculated results show that a reverse flow region, which is considered the main reason for occurring stall at 7.9° incidence, grows and collapses rapidly near the leading edge and leads to two critical points occurring on the end-wall with the increasing incidence in the baseline. As the micro-vortex generator is introduced in the baseline cascade, the corner separation is switched to a trailing edge separation by the thrust from the induced vortex. Meanwhile, the occurrence of failure is delayed due to the mixed low energy fluid and main flow. The synergistic effects between the micro-vortex generator and the boundary layer suction on the performance of the cascade are superior to the baseline at all the incidence conditions before the occurrence of failure, and the sudden deterioration of the cascade occurs at 10.3° incidence. The optimal results show that the farther upstream suction position, the lower total pressure loss of the cascade with vortex generator at the near stall condition. Moreover, the induced vortex with a leg can migrate the accumulated low energy fluid backward to delay the occurrence of stall.
基金The Project is Supported by Nation Natural Science Foundation of China
文摘This paper presents a brief summary of the three development stages of investigation on the transpiration cooling and its control for aircraft, missiles and electromagnetic gun, then the control problem of the distributed parameters system with a moving boundary is derived. It introduces the mathematical model of the transpiration cooling control, its control characteristics, and the present situation of the experimental and theoretical study on this problem. This paper also describes the main study results and the existing problems. The prospective application is also reported. The major references in every developing stage are listed systematically for further study.
