人体处于高压交流输电线路下方时,会产生静电感应和电磁感应。当感应电压和感应电流数值过大时,会对人体造成伤害,为此国际非电离辐射防护委员会(ICNIRP)以及IEEE规定了人体在高压输电线路不同曝露情形下的曝露场强限值。首先运用有限元...人体处于高压交流输电线路下方时,会产生静电感应和电磁感应。当感应电压和感应电流数值过大时,会对人体造成伤害,为此国际非电离辐射防护委员会(ICNIRP)以及IEEE规定了人体在高压输电线路不同曝露情形下的曝露场强限值。首先运用有限元法,考虑人体对地绝缘和人体接地2种情况,分析了高压输电线路曝露场强典型限值下人体所产生的感应电压和感应场强的大小;接着利用解析法计算了不同曝露限值下的人体感应电流、感应电荷密度以及感应电流密度;最后将计算结果与ICNIRP导则给出的曝露限值进行了比较。结果表明,人体处于职业曝露限值场强10 kV/m下,人体内部最大感应场强为2.082×10-3 kV/m,感应电流密度为0.176 m A/m2,接近或低于ICNIRP导则规定的限值范围,不会对人体造成不适感。展开更多
The twin-body plasma arc has the decoupling control ability of heat transfer and mass transfer,which is beneficial to shape and property control in wire arc additive manufacturing.In this paper,with the wire feeding s...The twin-body plasma arc has the decoupling control ability of heat transfer and mass transfer,which is beneficial to shape and property control in wire arc additive manufacturing.In this paper,with the wire feeding speed as a characteristic quantity,the wire melting control ability of twin-body plasma arc was studied by adjusting the current separation ratio(under the condition of a constant total current),the wire current/main current and the position of the wire in the arc axial direction.The results showed that under the premise that the total current remains unchanged(100 A),as the current separation ratio increased,the middle and minimum melting amounts increased approximately synchronously under the effect of anode effect power,the first melting mass range remained constant;the maximum melting amount increased twice as fast as the middle melting amount under the effect of the wire feeding speed,and the second melting mass range was expanded.When the wire current increased,the anode effect power and the plasma arc power were both factors causing the increase in the wire melting amount;however,when the main current increased,the plasma arc power was the only factor causing the increase in the wire melting amount.The average wire melting increment caused by the anode effect power was approximately 2.7 times that caused by the plasma arc power.The minimum melting amount was not affected by the wire-torch distance under any current separation ratio tested.When the current separation ratio increased and reached a threshold,the middle melting amount remained constant with increasing wire-torch distance.When the current separation ratio continued to increase and reached the next threshold,the maximum melting amount remained constant with the increasing wire-torch distance.The effect of the wire-torch distance on the wire melting amount reduced with the increase in the current separation ratio.Through this study,the decoupling mechanism and ability of this innovative arc heat source is more clearly.展开更多
A low power fast settling multi-standard CMOS fractional-N frequency synthesizer is proposed. The current reusing and frequency presetting techniques are adopted to realize the low power fast settling multi-standard f...A low power fast settling multi-standard CMOS fractional-N frequency synthesizer is proposed. The current reusing and frequency presetting techniques are adopted to realize the low power fast settling multi-standard fractional-N frequency synthesizer. An auxiliary non-volatile memory （NVM） is embedded to avoid the repetitive calibration process and to save power in practical application. This PLL is implemented in a 0.18 #m technology. The frequency range is 0.3 to 2.54 GHz and the settling time is less than 5 #s over the entire frequency range. The LC-VCO with the stacked divide-by-2 has a good figure of merit of-193.5 dBc/Hz. The measured phase noise of frequency synthesizer is about -115 dBc/Hz at 1 MHz offset when the carrier frequency is 2.4 GHz and the reference spurs are less than -52 dBc. The whole frequency synthesizer consumes only 4.35 mA @ 1.8 V.展开更多
文摘人体处于高压交流输电线路下方时,会产生静电感应和电磁感应。当感应电压和感应电流数值过大时,会对人体造成伤害,为此国际非电离辐射防护委员会(ICNIRP)以及IEEE规定了人体在高压输电线路不同曝露情形下的曝露场强限值。首先运用有限元法,考虑人体对地绝缘和人体接地2种情况,分析了高压输电线路曝露场强典型限值下人体所产生的感应电压和感应场强的大小;接着利用解析法计算了不同曝露限值下的人体感应电流、感应电荷密度以及感应电流密度;最后将计算结果与ICNIRP导则给出的曝露限值进行了比较。结果表明,人体处于职业曝露限值场强10 kV/m下,人体内部最大感应场强为2.082×10-3 kV/m,感应电流密度为0.176 m A/m2,接近或低于ICNIRP导则规定的限值范围,不会对人体造成不适感。
基金Supported by Youth Program of National Natural Science Foundation of China(Grant No.51905008)Beijing Postdoctoral Research Foundation of China(Grant No.2021-zz-064)+2 种基金Shandong Provincial Major Science and Technology Innovation Project of China(Grant No.2020JMRH0504)Jinan Innovation Team Project of China(Grant No.2021GXRC066)Quancheng Scholars Construction Project of China(Grant No.D03032).
文摘The twin-body plasma arc has the decoupling control ability of heat transfer and mass transfer,which is beneficial to shape and property control in wire arc additive manufacturing.In this paper,with the wire feeding speed as a characteristic quantity,the wire melting control ability of twin-body plasma arc was studied by adjusting the current separation ratio(under the condition of a constant total current),the wire current/main current and the position of the wire in the arc axial direction.The results showed that under the premise that the total current remains unchanged(100 A),as the current separation ratio increased,the middle and minimum melting amounts increased approximately synchronously under the effect of anode effect power,the first melting mass range remained constant;the maximum melting amount increased twice as fast as the middle melting amount under the effect of the wire feeding speed,and the second melting mass range was expanded.When the wire current increased,the anode effect power and the plasma arc power were both factors causing the increase in the wire melting amount;however,when the main current increased,the plasma arc power was the only factor causing the increase in the wire melting amount.The average wire melting increment caused by the anode effect power was approximately 2.7 times that caused by the plasma arc power.The minimum melting amount was not affected by the wire-torch distance under any current separation ratio tested.When the current separation ratio increased and reached a threshold,the middle melting amount remained constant with increasing wire-torch distance.When the current separation ratio continued to increase and reached the next threshold,the maximum melting amount remained constant with the increasing wire-torch distance.The effect of the wire-torch distance on the wire melting amount reduced with the increase in the current separation ratio.Through this study,the decoupling mechanism and ability of this innovative arc heat source is more clearly.
基金Project supported by the National Natural Science Foundation of China(No.60976023)the National Science and Technology Major Project of China(Nos.2009ZX03007-001,2012ZX03004007-002)
文摘A low power fast settling multi-standard CMOS fractional-N frequency synthesizer is proposed. The current reusing and frequency presetting techniques are adopted to realize the low power fast settling multi-standard fractional-N frequency synthesizer. An auxiliary non-volatile memory （NVM） is embedded to avoid the repetitive calibration process and to save power in practical application. This PLL is implemented in a 0.18 #m technology. The frequency range is 0.3 to 2.54 GHz and the settling time is less than 5 #s over the entire frequency range. The LC-VCO with the stacked divide-by-2 has a good figure of merit of-193.5 dBc/Hz. The measured phase noise of frequency synthesizer is about -115 dBc/Hz at 1 MHz offset when the carrier frequency is 2.4 GHz and the reference spurs are less than -52 dBc. The whole frequency synthesizer consumes only 4.35 mA @ 1.8 V.
