以玻璃微珠、流化床裂化催化剂颗粒、褐煤和聚氯乙烯颗粒为实验物料,开展粉体流动性表征与料仓下料实验。研究发现,不同粉体的流动性差异较大,相应的料仓重力下料结果也不同;实验所用粉体的下料流率远低于传统Brown and Richards模型的...以玻璃微珠、流化床裂化催化剂颗粒、褐煤和聚氯乙烯颗粒为实验物料,开展粉体流动性表征与料仓下料实验。研究发现,不同粉体的流动性差异较大,相应的料仓重力下料结果也不同;实验所用粉体的下料流率远低于传统Brown and Richards模型的预测值。分析表明,颗粒间相互作用导致的粉体黏附团聚是阻碍细颗粒粉体下料流动的主要原因。基于上述分析,利用剪切测试结合摩尔应力圆理论获得床层拉伸应力,并借助Rumpf方程构建的颗粒间相互作用与粉体床层应力之间的模型来获得不同粉体的颗粒间作用力;继而采用Bond数对粉体床层空隙率进行修正,揭示了颗粒间相互作用对粉体床层结构的影响,并在此基础上建立了粉体下料流率预测模型。新建立的耦合颗粒间作用力的粉体流率模型,有效改善了传统模型对细颗粒粉体流率预测值偏高的弊端,显著降低了流率预测偏差。展开更多
Upon the application of 3%yeast suspension as a feedstock to an expanded bed of Streamline AC equilibrated with 0.02 mol·L -1 phosphate buffer (pH 7.0), the transient variations of local bed voidage and particle ...Upon the application of 3%yeast suspension as a feedstock to an expanded bed of Streamline AC equilibrated with 0.02 mol·L -1 phosphate buffer (pH 7.0), the transient variations of local bed voidage and particle size distribution were investigated. The experiments were carried out in a customized glass column (26 mm I.D.) modified by side ports. It was exhibited that the introduction of unclarified feedstock with a high viscosity and density induced the upward movement of particle and consequently a change in local bed voidage and particle size distribution. At a given bed height, voidage firstly decreased to a minimum and then increased to a high equilibrated value in voidage. The transient process not only included a fluctuation in particle size distribution but also involved the change in particle concentration at a certain bed height, particularly at the middle and top of the column.展开更多
A particle sub-model describing the bed characteristics of a bubbling fluidised bed is presented. Atomisation air, applied at high pressures via a nozzle positioned above the bed for spray formation, is incorporated i...A particle sub-model describing the bed characteristics of a bubbling fluidised bed is presented. Atomisation air, applied at high pressures via a nozzle positioned above the bed for spray formation, is incorporated in the model since its presence has a profound influence on the bed characteristics, though the spray itself is not yet considered. A particle sub-model is developed using well-known empirical relations for particle drag force, bubble growth and velocity and particle distribution above the fluidised-bed surface. Simple but effective assumptions and abstractions were made concerning bubble distribution, particle ejection at the bed surface and the behaviour of atomisation air flow upon impacting the surface of a bubbling fluidised bed, The model was shown to be capable of predicting the fluidised bed characteristics in terms of bed heights, voidage distributions and solids volume fractions with good accuracy in less than 5 min of calculation time on a regular desktop PC. It is therefore suitable for incorporation into general process control models aimed at dynamic control for process efficiency and product quality in top-spray fluidised bed coating processes.展开更多
文摘以玻璃微珠、流化床裂化催化剂颗粒、褐煤和聚氯乙烯颗粒为实验物料,开展粉体流动性表征与料仓下料实验。研究发现,不同粉体的流动性差异较大,相应的料仓重力下料结果也不同;实验所用粉体的下料流率远低于传统Brown and Richards模型的预测值。分析表明,颗粒间相互作用导致的粉体黏附团聚是阻碍细颗粒粉体下料流动的主要原因。基于上述分析,利用剪切测试结合摩尔应力圆理论获得床层拉伸应力,并借助Rumpf方程构建的颗粒间相互作用与粉体床层应力之间的模型来获得不同粉体的颗粒间作用力;继而采用Bond数对粉体床层空隙率进行修正,揭示了颗粒间相互作用对粉体床层结构的影响,并在此基础上建立了粉体下料流率预测模型。新建立的耦合颗粒间作用力的粉体流率模型,有效改善了传统模型对细颗粒粉体流率预测值偏高的弊端,显著降低了流率预测偏差。
文摘Upon the application of 3%yeast suspension as a feedstock to an expanded bed of Streamline AC equilibrated with 0.02 mol·L -1 phosphate buffer (pH 7.0), the transient variations of local bed voidage and particle size distribution were investigated. The experiments were carried out in a customized glass column (26 mm I.D.) modified by side ports. It was exhibited that the introduction of unclarified feedstock with a high viscosity and density induced the upward movement of particle and consequently a change in local bed voidage and particle size distribution. At a given bed height, voidage firstly decreased to a minimum and then increased to a high equilibrated value in voidage. The transient process not only included a fluctuation in particle size distribution but also involved the change in particle concentration at a certain bed height, particularly at the middle and top of the column.
基金the financial support of the Special Research Fund (BOF) of the Ghent University
文摘A particle sub-model describing the bed characteristics of a bubbling fluidised bed is presented. Atomisation air, applied at high pressures via a nozzle positioned above the bed for spray formation, is incorporated in the model since its presence has a profound influence on the bed characteristics, though the spray itself is not yet considered. A particle sub-model is developed using well-known empirical relations for particle drag force, bubble growth and velocity and particle distribution above the fluidised-bed surface. Simple but effective assumptions and abstractions were made concerning bubble distribution, particle ejection at the bed surface and the behaviour of atomisation air flow upon impacting the surface of a bubbling fluidised bed, The model was shown to be capable of predicting the fluidised bed characteristics in terms of bed heights, voidage distributions and solids volume fractions with good accuracy in less than 5 min of calculation time on a regular desktop PC. It is therefore suitable for incorporation into general process control models aimed at dynamic control for process efficiency and product quality in top-spray fluidised bed coating processes.
